• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.288-291
• /
• 2022

본 논문은 4족 지능 로봇의 비평탄 지형 극복 기능을 구현하기 위해, 시뮬레이션 환경에서 제공하는 역기구학(Inverse Kinematic)과 개선된 강화 학습 방법(Partially Observable Markov Decision Process)을 분석하여 수립한 알고리즘을 동작 검증을 위한 임베디드 보드(Embedded Board)에 실제 적용하여 보았다. 이 연구를 통해 4족 보행 로봇의 효율적인 지형 극복형 보행 방식 설계 방법을 제안하며, 특히 IMU 센서의 지능적인 균형제어 방법을 평가하고 다양한 통신방식과 서보모터 제어 방식을 실험하고 구현하였다. 또한 모터 가감속 제어를 통해 보다 부드럽고 안정적인 보행을 구현한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.305-311
• /
• 2012

In this paper, we propose a gait generation method for quadruped robots using the xz-axis sway of the quadruped robot, which minimizes the shake of the quadruped robot and maximizes the stability margin. In the proposed method, the gait is generated based on wave gaits and the stability analysis uses the body tilt information of the quadruped robot according to the leg's height of leg. In addition, to reduce the impact on the body caused by the z-axis sway while walking, the proposed method generates the smooth walking movement trajectory with less impact by using Fourier series. Finally, to verify the applicability and effectiveness of the proposed method, we carry out the computer simulations and the real walking experiments with the implemented quadruped robot.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.248-250
• /
• 2008

본 논문은 GP(Genetic Programming)을 이용한 4족 보행 로봇의 새로운 걸음새 생성 방식에 대해 소개한다. 4족 보행로봇의 걸음새 생성문제는 다양한 파라미터를 통시에 최적화해야 하는 매우 어려운 문제이다. 본 논문에서는 GP를 기반으로 관절좌표계에서 로봇의 관절 궤석을 직접 제어하는 방식을 사용한다. 이는 기존의 특정한 형태의 발끝의 자취를 사용하는 방법들에 비해 효율적이며 구조적으로 제한피지 않는 특징을 가진다. 또한, 새로운 트리구조기반의 GP 연산자의 적용을 통해 더 좋은 결과를 얻을수 있었다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.3
• /
• pp.236-241
• /
• 2015

This paper presents a study on transformable multiple quadruped robots by docking between robots and waist joints. This robot is able to go on a variety of angles because of mecanum wheels. It is also a hybrid design which allows robot use legs to overcome obstacles on complex terrains and wheels to move on flat ground. The robot is applied kinematics of mecanum wheels and walking, and its walking is based on specific patterns. Docking module is located in front and backside of robot, docking algorithm is suggested and fulfilled for docking between 2 robots. A waist joint is at the center of robot body for transformation and after docking and transformation, robot can activate new functions that carry something.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.168-174
• /
• 2015

The ultimate purpose of a walking robot is to move to a designated spot and to perform a necessary manipulation. To perform various manipulations for a walking robot, it should have some kind of an extra manipulator. However, if the manipulation task for the robot is simple enough, the robot can perform the task by using its legs. Among various kinds of walking robots, a hexapod walking robot has relatively many legs, so it has the advantage of stability and walking speed. So, a hexapod walking robot can perform simple manipulation task by using its one or two legs while maintaining stability by using the rest of legs. In this paper, we deal with a simple manipulation task of holding a ball. We formulate the task as a redundancy resolution problem and propose a method for obtaining an optimal solution.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1235-1241
• /
• 2012

In this paper, each driving motor for leg joints on a robot is controlled by estimating the direction of the legs measuring each joint angle and attitude angle of robot. We used quadruped working robot named TITAN-VIII in order to carry out this experimental study. 4 load cells are installed under the bottom of 4 legs to measure the pressed force on each leg while it's walking. The walking experiments of the robot were performed in 8 different conditions combined with duty factor, the length of a stride, the trajectory height of the foot and walking period of robot. The validity of attitude control for quadruped walking robot is evaluated by comparing the pressed force on a leg and the power consumption of joint driving motor. As a result, it was confirmed that the slip-condition of which the foot leave the ground late at the beginning of new period of the robot during walking process, which means the attitude control of the robot during walking process wasn't perfect only by measuring joint and attitude angle for estimating the direction of the foot.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.298-300
• /
• 2022

4족 보행 로봇의 보행을 이해하기 위하여 역기구학 분석은 필수적인 요소이다. 본 논문에서는 각 다리가 3개의 자유도를 갖는 보행 로봇에 대한 역기구학을 직관적인 방법으로 해석하여 제공한다. 또한 다리의 끝단에 대응하는 관절 각도를 계산하는 프로그램을 개발하였으며 관련된 입출력 값들의 관계를 그래프 형태로 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1418-1423
• /
• 2004

A legged robot is friendly to human because it is resemble to human. And the robot can obtain support points freely because it has high degree of freedom for several joint as compared with a wheeled robot. Also the robot can create the relative position at desired position between support position and robot. The joint of robot cu used as manipulator. On the contrary the mechanism of robot is complicated to have many joint and moving speed is lower than wheeled robot. Also the legged robot is needed a special control not to fall on the ground because the robot is easy to vibrate when it is moving. The 4 leg structure is the minimum leg numbers not to fall and to realize safety gait continuously. A trot gait is investigated through experiments using a quadruped walking robot named TITAN-VIII.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1964-1972
• /
• 2009

This paper proposed a distributed web environment for developing robot services using a 4-legged robot and MSRS. The proposed development environment of the robot services enabled a high-level complicated robot application to operate in a distributed web environment by implementing robot functions as services which can be run on network nodes using Microsoft MSRS. The environment has been also implemented using a 4-legged robot, Genibo as a robot platform. In experiment, we showed the developed robot services are enable to be executed and configured dynamically and support a remote monitoring in a distributed web environment. Finally the feasibility and the effectiveness of the proposed environment has been verified by creating a robot application using the developed robot services in Visual Program Language which helps student to create a complicated robot application system easily.

• Journal of Internet of Things and Convergence
• /
• v.4 no.2
• /
• pp.7-11
• /
• 2018

In this paper, kinematic based walking pattern generation of biped walking robot is reviewed. Biped walking robot should be consisted of 6 Degree of Freedom(DOF) for each leg to walk properly in 3 dimensional circumstance. In this paper, simple structure of biped robot is depicted for walking pattern firstly. After fixing path of ankle of the robot, angle joints are coming from kinematic equatioins. Coordination of joints of a robot was set for dynamic analysis also. So walking pattern of a robot will be designed using dynamic equations of coordination of joint angles. Finally, setting of ankle of robot and pattern generation are key procedures of the robot walking.