• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.4
• /
• pp.681-690
• /
• 1999

본 논문에서는 요소를 사용하지 않은 수치해석기법인 무요소법 중에서 다중해상도(multi-resolution)특성이 내재되어 있는 Reproducing Kernel Particle Method (RKPM)의 이중스케일 분해기법을 사용하여 RKPM의 형상함수를 상단성분과 하단성분으로 분리하고 이를 3차원 선형탄성해석과정에 적용하여 von Mises 응력장의 상·하단성분을 유도하였다. 유도된 응력장의 상단성분을 이용하여 후처리과정을 거치지 않고도 응력의 고변화도 부위를 손쉽게 파악할 수 있는 기법을 개발하였으며 이를 이용한 효율적인 적응적 세분화기법의 적용가능성을 연구하였다. 대표적인 2차원 및 3차원 응력집중 문제에 적용하여 응력집중부위를 파악하고 간단한 적응적 세분화과정에 따른 절점추가를 통하여 해의 정도 향상을 파악해 본 결과, 본 연구에서 개발된 기법이 응력집중부위를 정확히 판정할 수 있었으며 효율적인 적응적 세분화기법의 유용한 도구로서 활용될 수 있음을 검증하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2292-2301
• /
• 2000

We propose an accurate and efficient estimation method of transverse shear stresses for analysis and design of laminated composite structures by 4-node quadrilateral degenerated shell elements. To get proper distributions of transverse shear stresses in each layer, we use 3-dimensional equilibrium equations instead of constitutive equations with shear correction factors which vary diversely according to the shapes of shell sections. Three dimensional equilibrium equations are integrated through the thickness direction with complete polynomial membrane stress fields, which are recovered by REP (Recovery by Equilibrium in Patches) recovery method. The 4-node quadrilateral degenerated shell element used in this paper has drilling degrees of freedom and shear stresses derived from assumed strain fields that are set up at natural coordinate systems. The numerical results demonstrate that the proposed estimation method attains reasonable accuracy and efficiency compared with other methods and FE analysis using 4-node degenerated shell elements.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.3
• /
• pp.291-298
• /
• 2003

Recently, as the size of buildings structure becomes large increases, their mat area of building structure is supported or by an inhomogeneous foundation. This paper presents a vibration analysis on thick plates subjected to in-plane force is presented in this paper. The rectangular plate is isotropic, homogeneous, and composed of a linearly elastic material. A vibration analysis of the rectangular thick plate iwas done by useing ofarectangular finite element with 8 nodes and 9 nodes. In this study, the foundation was idealized as a Pasternak foundation model. A Pasternak foundation haves a shear layer on Winkler's model, which idealizes the foundation as a vertical spring. In order tTo analysze the vibration of a plate supported on by an inhomogeneous Pasternak foundation, the value of the Winkler foundation parameter of the central and border zones of the plate awere chosen as WFP1 and WFP2. (fFigure 4.). The Winkler foundation parameter of WFP1 and WFP2 is varied from 0 to 10, $10^2$, and $10^3$ and the shear foundation parameters is were 0, 5, and 10. The ratio of the in-plane force to the critical load iwas applied as 0.4 to 0.8

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.239-245
• /
• 2014

Finite element modeling of composite structures may be cumbersome due to complex distributions of reinforcements. In this paper, an efficient scheme is proposed that can generate periodic meshes for the composite structures. Regular meshes with hexahedral finite elements are first prepared, and the elements are then trimmed to fit external surfaces of reinforcements in the composite structures. The trimmed hexahedral finite elements located at interfaces between the matrix and the reinforcements correspond to polyhedral finite elements, which allow an arbitrary number of nodes and faces in the elements. Because the trimming process is consistently conducted by means of consistent algorithms, the elements of the reinforcements are automatically compatible with those of the matrices. With the additional consideration of periodicity of reinforcements in a representative volume element(RVE), the proposed scheme provides periodic meshes in an efficient manner, which are compatible for each pair of periodic boundaries of the RVE. Therefore, periodic boundary conditions for the RVE are enforced straightforwardly. Numerical examples demonstrate the effectiveness of the proposed scheme for finite element modeling of complex composite structures.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.4
• /
• pp.231-237
• /
• 1999

A geometric non-linear finite element formulation of spatial ocean cable under currents is presented using multiple noded curved cable elements. Tangent stiffness and mass matrices for the isoparametric cable ele¬ment are derived and the initial equilibrium state of ocean cable subjected to self-weights, buoyancy, and current as well as support motions is determined using the load incremental method. Free vibration analysis of ocean cables is performed based on the initial equilibrium configuration. Numerical examples are presented and discussed in order to demonstrate the feasibility of the present finite element method and investigate dynamic characteristics of ocean cables.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.34-40
• /
• 1997

본 연구의 주 목적은 돔형 구조물의 해석에 있어서 보-데크 연결 모델을 정식화하는데 있다. 목조 돔 구조물의 데크지붕 효과는 Wu(1991), Telang(1992) 등에 의해 제안되었으며, 데크지붕 효과를 설명하기 위해 트러스 브레이싱법을 도입하였다. 그러나 이 TB법은 좁은 간격으로 박혀있는 못 들의 효과를 적절히 설명해 내지 못했다. 다른 한편으로는 Tsang(1991), Kavi(1992) 등이 Dolan(1989)의 이론을 응용한 보-데크 연결법(BDC)을 도입하여 해석하였다. 이 BDC모델은 보 요소의 이 보 요소에 강체링크로 연결되어 있는 스프링 요소가 보요소의 각 절점을 공유하게 되므로, 아무리 많은 스프링을 가정하더라도 자유도수는 증가하지 않는다는 것이다. 그러므로 돔 구조와 같은 대형 구조물을 해석할 때 컴퓨터 용량과 계산시간을 절약할 수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.159-159
• /
• 2015

상수관망시스템의 신뢰도를 정량화하기 위한 연구가 최근 활발히 진행되고 있다. 대부분의 연구는 절점의 공급가능수요량, 절점의 수두, 그리고 유량과 수두를 동시에 고려한 에너지(energy)를 이용하여 신뢰도 지수를 개발하였다. 이 중, Energy를 기반으로 하는 신뢰도지수로써 Resilience index(Todini, 2000), Network Resilience index(Prasad, 2004), Modified Resilience index(Jayaram, 2008)와 Entropy Resilience index(Raad, 2010) 등의 연구가 대표적이다. 상수관망시스템에 정상적인 상황을 넘어서는 부담이 가해졌을 때, 이를 완충하거나, 정상적인 용수공급 상황으로 빠르게 회복하는 능력인 복원력(Resilience)을 판단하기 위한 지표로써 제시된 Todini의 Resilience index를 기점으로, 상수관망의 신뢰도(Reliability)을 Energy 측면에서 판단할 수 있는 관련 지표에 대한 연구가 진행되어왔다. 특히, 상수관망의 최적설계 시, 상수관망의 기능적 요소로써 관련 지표들을 비용(Cost)과 함께 다중목적함수로 고려하는 연구까지 다수 진행되고 있으나, 이러한 지표들이 상수관망에서 핵심적인 몇 가지 요소들의 변화에 대하여 어떻게 반응하는지에 대한 분석은 제대로 이루어지지 않고 있다. 본 연구에서는 동일한 상수관망시스템에서 용수의 흐름상황을 크게 좌우할 수 있을 것으로 판단되는 몇 가지 변동상황을 고려하여 이러한 지표들이 각각의 변동상황에 어느정도 민감하게 반영하는지 분석하였다. 여기서, 상수관망시스템의 중요 변화요소로써 1) 수요량의 변화, 2) Loop 개수의 변화, 3) 수원지(Source) 개수의 변화, 4) 해당시스템의 최소 요구수압 변화 등을 고려하였다. 본 연구를 통해, 상수관망시스템의 신뢰도 산정에 활용되고 있는 기존의 지수들이 다양한 변동 상황을 얼마나 잘 반영할 수 있는지를 파악하고, 기존의 지수들을 보완한 개선된 신뢰도 지수의 개발가능성을 모색하도록 한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.599-607
• /
• 2002

During the shape optimization, relocations of nodes happen successively. However, excessive movement of nodes often results in the mesh distortion and eventually deteriorates the accuracy of the optimum solution. To overcome this problem, an efficient method lot the shape optimization has been developed. The method starts from the design domain which is large enough to hold the possible shape of the structure. The design domain has pre-defined uniform fine meshes. In each cycle, the method allots real properties to the elements inside the structure and nearly zero to ones outside. The performance of the method is evaluated through two examples with displacement and frequency constraints.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.4
• /
• pp.475-484
• /
• 2000

In this paper, new additional nonconforming modes for the improvement of bending behavior in the distorted 8 node hexahedral element and their effective modification method are studied. The rotational degrees of freedom are introduced by using a functional in which the rotations are independent variables. In an element formulation, the same interpolations are used in displacement and rotation fields, but nonconforming modes we applied only in displacement fields. To verify the developed element various numerical tests are carried out and test results show good behavior.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.534-539
• /
• 2005

Nodal displacements are referred to the initial configuration in the total Lagrangian formulation and to the last converged configuration in the updated Lagrangian furmulation. This research proposes a relative nodal displacement method to represent the position and orientation for a node in truss structures. Since the proposed method measures the relative nodal displacements relative to its adjacent nodal reference frame, they are still small for a truss structure undergoing large deformations for the small size elements. As a consequence, element formulations developed under the small deformation assumption are still valid for structures undergoing large deformations, which significantly simplifies the equations of equilibrium. A structural system is represented by a graph to systematically develop the governing equations of equilibrium for general systems. A node and an element are represented by a node and an edge in graph representation, respectively. Closed loops are opened to form a spanning tree by cutting edges. Two computational sequences are defined in the graph representation. One is the forward path sequence that is used to recover the Cartesian nodal displacements from relative nodal displacement sand traverses a graph from the base node towards the terminal nodes. The other is the backward path sequence that is used to recover the nodal forces in the relative coordinate system from the known nodal forces in the absolute coordinate system and traverses from the terminal nodes towards the base node. One open loop and one closed loop structure undergoing large deformations are analyzed to demonstrate the efficiency and validity of the proposed method.