• 대한치과의사협회지
• /
• 제58권1호
• /
• pp.8-18
• /
• 2019

This case report presents results for gingival recession coverage following gingival grafting and for gingival biotype enhancements by visualizing soft tissue volume changes using intraoral three-dimensional scanning. A 28 year old female patient with multiple gingival recessions and a 19 year old female patient with a single gingival recession on mandibular anterior area were treated. Root coverage was performed in both cases using autogenous subepithelial connective tissue harvested from palate. Intraoral 3D scan data were obatained presurgery and at 3 months, 1 year, and 2 years postsurgery. The recession areas were recovered successfully by subepithelial connective tissue graft combined with pedicle flap repositioning, and the patients showed neither further recurrence nor post-operative complication. Soft tissue biotype changes were identified by superimposing and analyzing scan data, revealing that gingival biotype was enhanced in both cases. These cases suggest that SCTG could be advantageous in terms of the gingival biotype enhancement, as well as gingival recession coverage, and intraoral 3D scanning might be suitable for assessing post-surgical gingival biotype change.

• 한국전자통신학회논문지
• /
• 제18권6호
• /
• pp.1189-1196
• /
• 2023

실내 공간과 관련된 정보는 도시화의 가속과 기술의 발달로 인하여 그 중요성이 증가하고 있으며, 건물 내부의 다목적 활용을 위하여 다양한 스캐닝 기술이 개발되고 있다. 본 논문에서는 스캐닝에 2D 라이다를 이용하여 지면과 수직인 방향으로 라이다를 회전 및 이동시키며 2차원 데이터의 집합을 얻은 후 이를 취합하여 3차원의 실내 공간 정보를 얻는 시스템을 제안하였다. 최종적으로 오차 보정 등의 알고리즘을 적용하여 실내 구조를 입체적으로 시각화하여 출력하였다.

• 한국의류산업학회지
• /
• 제19권3호
• /
• pp.312-319
• /
• 2017

The purpose of this study was to develop a customized wrist brace using 3D scanner and 3D printer. This study included in-depth interviews with people who had wrist pain and ever used wrist braces. The wrist brace has been designed and modeled by the CAD program after 3D scanning the wrist of subjects. Based on the results of the in-depth interviews on wrist brace users and design investigation in the market, a prototype of the wrist brace has been created. The wrist brace does not compress the hand and is easy to put on. In addition, it is adjustable to the wrist of users, allowing them to move his or her wrist without any restrictions. A computer-modeling program produced solid files for the design of the wrist brace after 3D scanning ten subjects' hands. It features a lattice-patterned surface, a velcro adjustment and trimming to smoothen the surface. PLA filaments were used to 3D print the wrist brace. As for the assessment, the wrist brace has been evaluated to be easy to put on and adjust to user's wrist. However, when it comes to appearance and comfortability, it was rated 3.0 or slightly above. This is because 3D printing materials are firm and not flexible compared to other materials such as neoprene or stretchable bands.

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.336-341
• /
• 2014

Dosimetry of radiating electromagnetic wave from mobile devices to human body has been evaluated by measuring Specific Absorption Rate (SAR). Usual SAR measurement system scans the volume by robot arm to evaluate RF power absorption to human body from wireless devices. It is possible to fast estimate the volume SAR by software deleting robot moving time with the 2D surface SAR data acquired by arrayed probes. This paper shows the principle of fast SAR measurement and the measured data comparison between the fast SAR system and the robot scanning system. Data of the fast SAR is well corresponding with data of robot scanning SAR within ${\pm}3$ dB, and its dynamic range covers from 10 mW/kg to 30 W/kg with 4.8 mm probe diameter.

• The Journal of Advanced Prosthodontics
• /
• 제14권4호
• /
• pp.236-249
• /
• 2022

PURPOSE. The present study compared the accuracy between digital and conventional implant impressions. MATERIALS AND METHODS. The experimental models were divided into six groups depending on the implant location and the scanning span. Digital impressions were captured using the intraoral optical scanner TRIOS (3Shape, Copenhagen, Denmark). Conventional impressions were taken with the monophase impression material based on addition-cured silicones, Honigum-Mono (DMG, Hamburg, Germany). A high-precision laboratory scanner D900 (3Shape, Copenhagen, Denmark) was used to obtain digital data of resin models and stone casts. Surface tessellation language (STL) datasets from scanner were imported into the analysis software Geomagic Qualify 14 (3D Systems, Rock Hill, SC, USA), and scan body deviations were determined through two-dimensional and three-dimensional analyses. Each scan body was measured five times. The Sidak t test was used to analyze the experimental data. RESULTS. Implant position and scanning distance affected the impression accuracy. For a unilateral arch implant and the mandible models with two implants, no significant difference was observed in the accuracy between the digital and conventional implant impressions on scan bodies; however, the corresponding differences for trans-arch implants and mandible with six implants were extremely significant (P<.001). CONCLUSION. For short-span scanning, the accuracy of digital and conventional implant impressions did not differ significantly. For long-span scanning, the precision of digital impressions was significantly inferior to that of the traditional impressions.

• 한국정보통신학회논문지
• /
• 제22권11호
• /
• pp.1505-1510
• /
• 2018

그래픽스 분야의 제품모델링 제작기술은 급속하게 발전하고 있고 3차원 데이터 응용과 활용성은 계속 증가하고 있다. 제품디자인 제작에 있어 3차원 모델링 제작에는 많은 시간이 소요된다. 최근 역설계 방식은 3D 데이터의 응용과 제작시간단축으로 활용성이 크다. 본 연구는 영상데이터 기반으로 포토메트리를 이용하여 3차원 포인트 클라우드 및 메쉬 데이터를 추출하고 이를 응용하여 제품의 1차 시안을 제작한다. 디자인 수정에 중점을 두어 2차 시안이 제작되었으며 3차 시제품 제작을 위한 3D 프린팅 작업을 진행한다. 이러한 제품디자인 제작과정에서 영상데이터의 활용과 가능성 및 3D 모델링 제작시간의 단축, 효율적인 프로세스를 제시한다. 또한 제품디자인 환경변화에 대응하기 위한 신제품 개발 프로세스 시스템의 모델을 제안한다.

• 한국지능시스템학회논문지
• /
• 제23권4호
• /
• pp.286-291
• /
• 2013

대시야 백색광간섭계(WSI ; White Light Scanning Interferometer)를 이용하여, Flip Chip Bump 검사 공정에 적용하는 것을 목적으로 한 인라인 형태의 플립칩 범프 3차원 검사 장치를 개발한다. 여러 서브스트레이트에 있는 플립칩 범프 높이 측정 결과와 이에 의한 동일한 여러 범프에 대한 반복성 측정 실험 결과를 제시한다. 테스트 벤치에서의 실험 결과와 개발된 플립칩 범프 3차원 검사 장치에서의 실험 결과를 비교하였으며 진동의 영향이 감소되어 개선된 반복성 실험 결과를 얻을 수 있었다. 플립칩 범프 3차원 검사 장치의 검사성능을 평가할 수 있는 기준을 제시한다.

• 지구물리
• /
• 제9권1호
• /
• pp.47-62
• /
• 2006

국내 지형의 약 70%는 산악지역이며, 도로, 철도 및 터널 등에는 무수한 암반 불연속면이 존재한다. 이러한 암반 불연속면의 조사, 안정성 분석 및 합리적인 안정화 대책공법 등의 시스템 구축이 시급한 실정이다. 기존의 암반 불연속면 조사방법은 인력, 시간 및 현장 접근성 등의 여러 한계점을 가지고 있다. 본 논문에서는 이러한 단점을 보안하기 위한 방법으로현재 정밀한 3차원 공간정보군(群)을 얻을 수 있는 지상 레이저 스캐닝 시스템을 활용한 방법을 제안하였다. 지상 레이저스캐닝 시스템을 이용한 방법은 측정시간이 짧고, 대절토사면 및 접근이 불가능한 지역에서도 측량이 가능한 장점을 가지고 있다. 본 연구에서는 암반사면의 안정성 분석, 댐체 및 터널내부의 변위특성을 지상 레이저 스캐닝 시스템을 이용하여 3차원 공간정보(좌표)를 갖는 측점운(測點雲: point-cloud)을 측정함으로써 만족할 만한 결과를 얻을 수 있었다. 암반사면의 경우, 실제 암반사면의 3D 모델링 결과로부터 불연속면의 방향성 추출, 파괴형태 분석, 절리면의 거칠기 정량화 및 붕괴체적 등을 구할 수 있었다. 댐체 및 터널과 같은 구조물의 경우에는 역설계를 수행하여, 설계도면과의 오차 확인 및 구조물의 변위측정 등 안전진단에 활용할 수 있었다.

• The Journal of Advanced Prosthodontics
• /
• 제7권6호
• /
• pp.460-467
• /
• 2015

PURPOSE. The aim of this study is to evaluate the appropriate impression technique by analyzing the superimposition of 3D digital model for evaluating accuracy of conventional impression technique and digital impression. MATERIALS AND METHODS. Twenty-four patients who had no periodontitis or temporomandibular joint disease were selected for analysis. As a reference model, digital impressions with a digital impression system were performed. As a test models, for conventional impression dual-arch and full-arch, impression techniques utilizing addition type polyvinylsiloxane for fabrication of cast were applied. 3D laser scanner is used for scanning the cast. Each 3 pairs for 25 STL datasets were imported into the inspection software. The three-dimensional differences were illustrated in a color-coded map. For three-dimensional quantitative analysis, 4 specified contact locations(buccal and lingual cusps of second premolar and molar) were established. For two-dimensional quantitative analysis, the sectioning from buccal cusp to lingual cusp of second premolar and molar were acquired depending on the tooth axis. RESULTS. In color-coded map, the biggest difference between intraoral scanning and dual-arch impression was seen (P<.05). In three-dimensional analysis, the biggest difference was seen between intraoral scanning and dual-arch impression and the smallest difference was seen between dual-arch and full-arch impression. CONCLUSION. The two- and three-dimensional deviations between intraoral scanner and dual-arch impression was bigger than full-arch and dual-arch impression (P<.05). The second premolar showed significantly bigger three-dimensional deviations than the second molar in the three-dimensional deviations (P>.05).

• Current Optics and Photonics
• /
• 제5권6호
• /
• pp.680-685
• /
• 2021

We propose a technique that reconstructs a hologram whose pixel number is greater than the pixel numbers of a conventional image sensor. The pixel numbers of the hologram recorded by optical scanning holography (OSH) increases as the scan area becomes larger. The reconstruction time also increases drastically as the size of the hologram increases. The holographic information of a three-dimensional (3D) scene is distributed throughout the recorded hologram; this makes the simple divide-and-stitch approach fail. We propose a technique that reconstructs the hologram without loss of holographic information. First, we record the hologram of a 3D scene using OSH. Second, we segment the hologram into sub-holograms that contain complete holographic information. Third, we reconstruct the sub-holograms simultaneously. Finally, we rearrange the reconstructions of the sub-holograms.