• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06a
• /
• pp.340-342
• /
• 2006

기존의 멀티미디어 통신 프로토콜은 무선 네트워크 환경에서의 많은 오류에 대한 고려를 하지 않기 때문에 데이터의 손실이 커지고 신뢰성이 보장하기 위한 방법의 사용으로 인해 오버헤드가 커지는 문제가 있다. 3G-324M 프로토콜은 이러한 무선 네트워크 환경에서 멀티미디어 통신 시 사용되는 프로토콜이다. 하지만 오류 발생이 기변적으로 변하는 상황에 대해서 적절칩 대처하지 못하는 단점이 있다. 본 논문에서는 기존의 3G-324M 프로토콜을 확장하여, 무선 네트워크라는 오류 발생이 많은 상황에서 이러한 단점을 적절히 대처할 수 있는 프로토콜 설계 요소 및 그와 관련된 구현 방법에 관해 논한다. 제안한 방법을 검증하기 위해 프로토콜에 수신된 데이터의 오류를 예측하는 모듈을 추가해 오류 발생 정도를 예측하고 송신하는 데이터를 이러한 상황에 적절하게 대처해 송신할 수 있도록 하였고 그에 따른 테스트 결과를 살펴본다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06b
• /
• pp.344-349
• /
• 2007

무선 통신 환경에서 실시간 화상 통신을 위해 제안된 3G-324M 프로토콜은 회선 교환 통신을 사용함으로 인해 제한된 대역폭을 이용해야만 하므로 전송 시 여러 가지 제약이 발생하게 된다. 특히 송수신의 스케줄링을 효율적으로 하지 못할 경우 H.223 프로토콜에서 매 타임 슬롯마다 전송 가능한 최대 크기의 데이터를 전송 버퍼에 채워주지 못해 전송 지연 시간이 발생하게 된다. 본 논문에서는 이러한 문제들을 해결하기 위한 통신 스케줄링 기법을 제시한다. 이 통신 스케줄링 기법은 화상 프레임의 종류에 따라 크기가 크게 변한다는 사실에 기초해 H.223 프로토콜의 실행 비율을 임시적으로 증가시켜 지연시간이 늘어나는 것을 최소화하고 이로 인해 내부 버퍼 사용량을 줄일 수 있도록 한다. 또 수신 버퍼에 처리해야 할 데이터가 많은 경우, 임시로 H.223 프로토콜의 실행 비율을 증가시켜 불필요한 수신 지연 시간이 발생하지 않도록 한다. 실험은 내부 버퍼의 사용량은 제안한 통신 스케줄링 기법이 다른 통신 스케줄링 기법들에 비해 효율적으로 관리 되며 패킷의 손실률, 수신 단말기에서의 지연이 줄어드는 것을 보여준다.

• Journal of Broadcast Engineering
• /
• v.13 no.1
• /
• pp.25-33
• /
• 2008

Video telephony is a representative service in 3G mobile network. And there have been efforts to improve quality of video telephony service in different fields. In Korea, the leading mobile service provider SKTelecom and KTF service the WCDMA network as 3G mobile network. Now, more than a million people is using the network. In this paper, we study about video telephony over WCDMA network. and propose error minimizing algorithm using cross-layer adaptation between physical layer and video codec. We simulated 3G-324M protocol with MPEG-4 video codec, and simulation results show suggested algorithm improve packet transmission rate for improving quality of video telephony service.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.5
• /
• pp.477-485
• /
• 2002

In this paper, we present an efficient hardware architecture for the H.263 video codec and its VLSI implementation. This architecture is based on the unified interface by which internal hardware engines and an internal RISC processor are connected one another. The unified interface enables the modular design of internal blocks, efficient hardware/software partitioning, and pipelined paralled operations. The developed VLSI supports the H.263 version 2 profile 3 @ level 10, and moreover, both the control protocol H.245 and the multiplexing protocol H.223. Therefore, it can be used for the complete ITU-T H.324 or 3GPP 3G 324M multimedia processor with the help of an external audio codec. Simultaneous encoding and decoding of QCIF format images at a rate greater than 15 frames per second is achieved at 40 MHz clock frequency.

• Analytical Science and Technology
• /
• v.16 no.2
• /
• pp.110-116
• /
• 2003

A study has been done on the separation of iodide from spent pressurized water reactor (PWR) fuels and its quantitative determination using ion chromatography. Spent PWR fuels were dissolved with mixed acid of nitric and hydrochloric acids (80 : 20 molL%) which can oxidize iodide to iodate to prevent it from be vaporized. After reducing ${IO_3}^-$ ­to $I_2$ in 2.5 M $HNO_3$ with $NH_2OH{\cdot}HCl$, Iodine was selectively separated from actinides and all other fission products with carbontetrachloride and back-extracted with 0.1 M $NaHSO_3$. Recovered iodide was determined using the ion chromatograph of which the column was installed in a glove box for the analysis of radioactive materials. In practice, spent PWR fuel with 42,000~44,000 MWd/MtU was analyzed and its quantity was compared to that calculated by burnup code, ORIGEN2. The agreement was achieved with a deviation of -8.3~-0.5% from the ORIGEN 2 data, $324.5{\sim}343.6{\mu}g/g$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.4
• /
• pp.324-331
• /
• 2024

The height of large car and truck carriers from the keel to the wheel house is 44 ~ 46 m, and as the car-carriers increases in size, it exhibits the 'top heavy' characteristic, where the upper section is heavier than the lower section. This study aims to estimate the maximum outward heel angle of the Golden Ray car-carrier (G-ship) during turning maneuvers for accident investigation and the prevention of similar accidents. The theoretically calculated maximum outward heel is 7.5° (at 19 kn, rudder angle 35°) with a GM of +3.0 m or higher, and 16.7° with a GM of +1.85 m. Meanwhile the experimentally modified maximum outward heel is 10.5° (at 19 kn, rudder angle 35°) with a GM of +3.0 m or higher, and 23.3° with a GM of +1.85 m. The G-ship is maneuvered during an accident at a speed of 13 kn, at starboard rudder angle of 10° to 20°, it changes course from 038°(T) to 105°(T) based on the instructions of the on-board pilot. At this time, the maximum outward heel is estimated to be between 7.8° and 10.9° at the port side, which is 2.2 times higher than the normal outward heel. In the IS code, cargo ships are required to exhibit a minimum GoM of +0.15 m or more. The maneuvered G-ship exhibits a GoM of +1.72 m. It is not maneuvered because it fails to satisfy the international GoM criteria and because its GoM is insufficient to counteract the heeling moment during the maneuver. This study is performed based on accident-investigation results from the Korea Maritime Safety Tribunal and the USCG.

• ETRI Journal
• /
• v.25 no.6
• /
• pp.489-502
• /
• 2003

This paper presents an MPEG-4 video codec, called MoVa, for video coding applications that adopts 3G-324M. We designed MoVa to be optimal by embedding a cost-effective ARM7TDMI core and partitioning it into hardwired blocks and firmware blocks to provide a reasonable tradeoff between computational requirements, power consumption, and programmability. Typical hardwired blocks are motion estimation and motion compensation, discrete cosine transform and quantization, and variable length coding and decoding, while intra refresh, rate control, error resilience, error concealment, etc. are implemented by software. MoVa has a pipeline structure and its operation is performed in four stages at encoding and in three stages at decoding. It meets the requirements of MPEG-4 SP@L2 and can perform either 30 frames/s (fps) of QCIF or SQCIF, or 7.5 fps (in codec mode) to 15 fps (in encode/decode mode) of CIF at a maximum clock rate of 27 MHz for 128 kbps or 144 kbps. MoVa can be applied to many video systems requiring a high bit rate and various video formats, such as videophone, videoconferencing, surveillance, news, and entertainment.

• Applied Chemistry for Engineering
• /
• v.21 no.6
• /
• pp.648-652
• /
• 2010

Catalytic activities of the partial oxidation of methane (POM) to hydrogen were investigated over Pd(5)/Ti-SPK and Pd(5)/Zr-SPK in a fixed bed flow reactor (FBFR) under atmosphere, and the catalysts were characterized by BET, XPS, XRD. The BET surface areas, pore volume and pore width of Horvath-Kawaze, micro pore area and volume of t-plot of Pd(5)/Ti-SPK and Pd(5)/Zr-SPK were $284m^2/g$, $0.233cm^3/g$, 3.9 nm, $30m^2/g$, $0.015cm^3/g$ and $396m^2/g$, $0.324cm^3/g$, 3.7nm, $119m^2/g$, $0.055cm^3/g$, repectively. The nitrogen adsorption isotherms were type IV with hysteresis. XPS showed that Si 2p and O 1s core electronlevels of Ti-SPK and Zr-SPK substituted Ti and Zr shifted to slightly lower binding energies than SPK. The oxidation states of Pd on the surface of catalysts were $Pd^0$ and $Pd^{+2}$. XRD patterns showed that crystal structures of fresh catalyst changed amorphous into crystal phase after reaction. The conversion and selectivity of POM to hydrogen over Pd(5)/Ti-SPK and Pd(5)/Zr-SPK were 77, 84% and 78, 72%, respectively, at 973 K, $CH_4/O_2$ = 2, GHSV = $8.4{\times}10^4mL/g_{cat}{\cdot}h$ and were kept constant even after 3 days in stream. These results confirm superior activity, thermal stability, and physicochemical properties of catalyst in POM to hydrogen.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.319-324
• /
• 2001

본 연구에서는 NaOH로 첨착시킨 활성탄의 표면특성변화와 H$_2$S 흡착능을 고찰하였다. 첨착시약으로 사용된 NaOH 용액의 농도는 1~8N이며, 활성탄의 입자크기는 8$\times$30mesh가 적용되었다. 실험결과는 첨착율이 0.87~5.8% 범위 내에서 증가할수록 BET 표면적은 1050$m^2$/g에서 783$m^2$/g로 감소하며, 표면산도는 0.541meq/g-AC에서 0meq/g-AC으로 감소하고, pH는 9.56에서 10.86으로 증가하는 것으로 밝혀졌다. 또한 NaOH로 첨착시킨 활성탄의 H$_2$S 평형흡착능을 보임으로써 비첨착활성탄에 비해 2~3배 높은 수준을 나타냄을 알 수 있었다.

• Journal of Mushroom
• /
• v.16 no.4
• /
• pp.324-330
• /
• 2018

The objective of this study was to evaluate antioxidant effect and tyrosinase inhibitory activity of white beech mushroom (Hypsizygus marmoreus) extracts. The white beech mushroom was extracted into hot water and methanol. Total polyphenol content was highest in the hot water extract ($8.4{\pm}3.27mg\;GAE/g$) compared to the methanol extract ($7.3{\pm}2.85mg\;GAE/g$). The flavonoids contents in hot water and methanol extracts were $3.8{\pm}3.81ug/mg$ and $2.5{\pm}1.95ug/mg$, respectively. The tyrosinase inhibitory activity of extract was increased in a dose dependent manner and tyrosinase inhibitory activity of extract (hot water extract, 69.72%; methanol extract, 52.67% at 40 mg/ml) was lower than those of positive control 2% arbutin (96%). The DPPH radical scavenging activity of the hot water and methanol extract was 80% and 74%, respectively. Hot water extract ($63.34{\pm}1.00uM\;TE/g$) were more effective in ORAC (oxygen radical absorbance capacity) value than methanol extract ($46.33{\pm}0.48uM\;TE/g$). The toxicity of hot water and methanol extracts was investigated using WST-1 (4-[3-(4-iodophenyl)-2-(4-nitrophenyl)-2H-5-tetrazolio]-1,3-benzene disulphonate) assay on the B16BL6 melanoma cells.