• Journal of International Society for Simulation Surgery
• /
• 제1권2호
• /
• pp.80-82
• /
• 2014

Purpose Microtia is congenital anomaly of external ear and the reconstruction method for the external ear of microtia patient was based on autogenous costal cartilage framework. The application of 3D printing technique in medical science has made more possibility of human tissue restoration, and we tried to apply this technique in auricular reconstruction field. Materials and Methods As for unilateral microtia patient, the contralateral side ear is normal and reconstructive surgeon tried to mimic it for reconstruction of affected ear. So, we obtained facial CT scan of microtia patient and made mirror image of normal side ear. Moreover, to make the 3D scaffold based on the mirror image of normal ear and to apply this scaffold for the auricular reconstruction surgery, we included auriculocephalic sulcus and anterior fixation part. Results We could successfully obtain mirror image of normal ear, auriculocephalic sulcus and anterior fixation part for 3D scaffold printing. Conclusions Using this CT image processing and 3D printing technique, we will be able to make the scaffold for auricular reconstruction of unilateral microtia patient, and perform auricular reconstruction in near future.

• 반도체디스플레이기술학회지
• /
• 제16권4호
• /
• pp.25-29
• /
• 2017

In this paper, we have studied the deformation problem of the scaffold caused by the FDM type 3D printer. The Practical TRIZ technique was used to solve the deformation problem of the scaffold generated from the adhesion surface between the scaffold and the bed. The Practical TRIZ methodology was used to derive the solution and the experiment was conducted on the derived solution. As a result of evaluating the experimental results obtained for the solution, it was found that the deformation of the scaffold was much improved to the satisfactory level.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.148.2-148.2
• /
• 2005

• Elastomers and Composites
• /
• 제44권2호
• /
• pp.106-111
• /
• 2009

조직공학은 기능을 상실한 인체를 대체하거나 복원하기 위해 인공대체품을 개발하기 위한 중요한 학문이다. 특히, 세포가 자랄 수 있는 지지체 역할을 하는 스캐폴드는 조직공학 연구를 위한 중요한 부분을 차지하고 있다. 그래서, 3차원 조직공학용 스캐폴드 개발을 위한 다양한 제조 방법을 소개하고자 하였다. 스캐폴드의 일반적인 제조방법으로는 염침출법 (solvent-casting particulate-leaching), 염 발포법 (gas foaming/salt leaching), fiber meshes/fiber bonding 법, 상분리법 (phase separation), melt moulding 법, 동결 건조법 (freeze drying)이 있으며, 넓은 표면적을 가진 스캐폴드 개발방법으로 전기방사법이 알려져 있다. 또한, 최근에는 스캐폴드 내부의 균일한 세포의 침투를 유도하기 위해 적당한 공극크기를 조절하고 우수한 공극률을 가진 스캐폴드를 개발하고자 stereolithography (SLA), selective laser sintering (SLS), fused deposition modeling (FDM), 및 3D printing (3DP) 와 같은 다양한 solid freeform fabrication (SFF) 기술이 개발되어지고 있다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제23권2호
• /
• pp.193-199
• /
• 2011

Silk protein and agarose are widely known as biocompatible materials in the human body. A three-dimensional (3D) scaffold composed of agarose and low-molecular- weight silk fibroin (LSF) was fabricated and examined in terms of structural characteristics and cellular responses in bone tissue engineering. This study showed that mouse pluripotent precursor cells attached to and proliferated uniformly on and within the LSF-containing 3D scaffold. Interestingly, cell proliferation and attachment was shown to be higher in a 3D scaffold containing 0.02% LSF, as compared to other LSF concentrations. The results of this study suggest that agarose-LSF scaffolds may be useful materials for tissue engineering.

• 대한의용생체공학회:의공학회지
• /
• 제35권6호
• /
• pp.192-196
• /
• 2014

Collagen scaffolds were synthesized by cross linking into a solution mixture of 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochlorid(EDC) in ethanol, followed by pressing, cleaning and lyophilization process after the type I atelo-collagen solutions in D.I water(pH3). The experimental conditions are collagen concentration of 1.0 wt%, 3.0 wt%, 5.0 wt% and differential concentration of cross-linker. Then, parametric studies were performed by varying the parameters to investigate the morphology, the porosity, the swelling ratio and the thickness and genotoxicity of the scaffolds. The scaffolds thickness pattern was regular to concentration of the degree of cross-linker and collagen. It was observed that the swelling ratio, the degree of crosslink, and the pore size(thickness of scaffold) can be controlled by adjusting the collagen, crosslinker. Among the parameters investigated, the smallest thickness can be achieved by collagen, crosslinker concentrate condition. The collagen scaffold is induced no genotoxicity. The lowest swelling ratio, as an indication of the highest degree of crosslink, can be obtained by adding crosslink agent.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1259-1264
• /
• 2007

Microstereolithography technology has potential capability for fabrication of 3D microstructures. It evolved from conventional SLA which is one of the RP processes. In a microstereolithography process, 3D microstructures can be easily fabricated by continuously stacking 2D layer which is photopolymerized using a liquid prepolymer. Combination between biocompatible/biodegradable photocurable prepolymer and 3D complex fabrication in microstereolithography makes broad application areas such as medical, pharmaceutic, and bio devices. In particular, a 3D microneedle for transdermal drug delivery and a scaffold for tissue engineering are fabricated using this technology. In this paper, the authors address development of microstereolithography system adapted to large surface and fabrication of various microstructures. In addition, to apply human body we suggest a biodegradable 3D microneedle and a scaffold using biodegradable photocurable prepolymer.

• Macromolecular Research
• /
• 제12권4호
• /
• pp.367-373
• /
• 2004

We have developed a rigorous heat treatment method to improve the biocompatibility of chitosan as a tissue-engineered scaffold. The chitosan scaffold was prepared by the controlled freezing and lyophilizing method using dilute acetic acid and then it was heat-treated at 110$^{\circ}C$ in vacuo for 1-3 days. To explore changes in the physicochemical properties of the heat-treated scaffold, we analyzed the degree of deacetylation by colloid titration with poly(vinyl potassium sulfate) and the structural changes were analyzed by scanning electron microscopy, Fourier transform infrared (FT-IR) spectroscopy, wide-angle X-ray diffractometry (WAXD), and lysozyme susceptibility. The degree of deacetylation of chitosan scaffolds decreased significantly from 85 to 30% as the heat treatment time increased. FT-IR spectroscopic and WAXD data indicated the formation of amide bonds between the amino groups of chitosan and acetic acids carbonyl group, and of interchain hydrogen bonding between the carbonyl groups in the C-6 residues of chitosan and the N-acetyl groups. Our rigorous heat treatment method causes the scaffold to become more susceptible to lysozyme treatment. We performed further examinations of the changes in the biocompatibility of the chitosan scaffold after rigorous heat treatment by measuring the initial cell binding capacity and cell growth rate. Human dermal fibroblasts (HDFs) adhere and spread more effectively to the heat-treated chitosan than to the untreated sample. When the cell growth of the HDFs on the film or the scaffold was analyzed by an MTT assay, we found that rigorous heat treatment stimulated cell growth by 1.5∼1.95-fold relative to that of the untreated chitosan. We conclude that the rigorous dry heat treatment process increases the biocompatibility of the chitosan scaffold by decreasing the degree of deacetylation and by increasing cell attachment and growth.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.355-356
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.655-656
• /
• 2010