• 수산해양기술연구
• /
• 제34권3호
• /
• pp.274-282
• /
• 1998

그물실의 직경과 발 길이의 비율 d/l이 선망의 침강 운동에 어떤 영향을 끼칠 것인가를 해명하기 위해서 그물실의 직경은 0.45mm(PES 28 tex${\times}$2${\times}$2)의 것으로 모두 같고, 발 길이는 4.3, 5.0, 5.5, 6.0, 6.6 및 7.7mm로 각각 다르게 편망된 6종류의 무결절 그물감을 사용해서 뜸줄의 길이 450cm, 그물의 폭 85cm가 되도록 제작하고 뜸 160g과 발돌 50g을 매달아서, 각각 I,II,III,IV,V및 Ⅵ형 그물이라고 했다. 회류 수조의 수로 상에 투망 장치를 설치해서 정지 상태의 수중에 선망 그물을 투망하고 상방과 측면에 설치한 비디오 카메라를 사용하여 그물의 침강과정을 촬영 톡화했으며, 그물에 표시한 측정점의 좌표를 화상 해석 장치로 읽고 실험 값을 구했다. 그리고, Runge-Kutta-Gill법에 의한 연립 미분방정식 해법을 이용하여 수치 해석을 행하였으며, 그 결과는 다음과 같다. 1.그물 아랫자락의 침강속도는 d/l이 가장 작은 Ⅵ형 그물이 가장 빠르고, V,IV,III,II및 I형 그물 순으로 늦게 나타났다. 2.그물 벽에 대한 저항 계수는 d/l의 크기에 의존하여 $K{\arg}$=0.081$(d/l)^-0.5$의 관계식으로 나타낼 수 있었다. 3.그물 다발의 저항 계수는 d/l의 크기에 의존하지 않은 $C_R=0.91(\frac{p}{$p_u$})$의 관계식으로 나타낼 수 있었다.

• 한국염색가공학회지
• /
• 제21권3호
• /
• pp.26-36
• /
• 2009

The objective of this study is to investigate the elution characteristics of the partial dispositioned hollow nylon filament and the mechanical properties of the eluted fabrics according to the weight reduction conditions. For this purpose, the partial dispositioned nylon/PET composite filament, SDY 70d/48f was prepared, and warp beam was also prepared on the sizing machine using these yarns. Four kinds of woven fabrics were designed with different warp and weft densities and these fabrics specimens were eluted with weight reduction conditions of two kinds of NaOH concentration (30, 40g/l), three kinds of weight reduction temperature (50, 60, $85^{\circ}C$) and two kinds of weight reduction time (30, 60min). The eluting rates of these fabrics specimens were analysed with various weight reduction conditions. The eluting characteristics of these fabrics were discussed with the cross-section of nylon hollow filament measures by SEM. Finally, the mechanical properties of the partial dispositioned hollow nylon fabrics were measured and discussed with various weight reduction conditions.

• 대한조선학회논문집
• /
• 제52권3호
• /
• pp.248-254
• /
• 2015

The strength and fatigue life of Satin and Twill-woven CF/epoxy composite(CFRP) have been investigated. Damage mechanism fatigue method has been used to assess fatigue damage accumulation. It is based on measured residual stiffness and residual strength of carbon-fiber reinforced plastic(CFRP) laminates under cyclic loading. Fatigue damage evolution in composite laminates and predict fatigue life of the laminates were simulated by finite element analysis(FEA) method. The stress analysis was carried out in MSC patran/Nastran. A modified Hashin's failure criterion di rmfjapplied to predict the failure of the experimental data of fatigue life but a Ye-delamination criterion was ignored because of 2D modeling. Almost linear stiffness and strength degradation were observed during most of the fatigue process. These stress distribution data were adopted in the simulation to simulate fatigue behavior and estimate life of the laminates. From the results, the predicted fatigue life is more conservatively estimated than the experimental results.

• 패션비즈니스
• /
• 제19권5호
• /
• pp.1-16
• /
• 2015

The appearances and geometry structures of knitted fabrics have important effects on their functions as textile fabrics. Structural design of the woven fabric, prior to the manufacturing processes in the weaving mill, often leads to a similar predictable appearance in the final outcome with the corresponding weave design. The increase of the employment of elastic textile yarns in knitting fabrics for comfort stretch or outdoor sports wear knit products has, however, resulted in difficulties in predicting the final appearance of the knit structure design. Due to the stretchability and exceptional recovery behavior of the elastic yarns such as polyurethane elastomeric yarns, the appearance of the final product often differs from the initial knit design. At textile CAD program for preparing tricot knit designs has been employed in this study to predict the two dimensional appearance of the design. The similarities between the designs and corresponding knit products seem to be acceptable for the two-dimensional textile CAD program in this study. However, when elastomeric yarns are partially employed in the polyester filament tricot product, a considerable amount of departure from the design is apparent due to the constriction and/or deformation of property differences in the elastomeric yarns and polyester filament yarns. Therefore, another purpose of this study is to measure the departure of the final tricot product from the initial tricot design, especially in the case employing elastomeric yarns in the knit structure together with regular polyester filament yarns. For measuring the three-dimensional departure, a 3D scanning system has been used for the mesh reconstruction of the fabric specimen. Hopefully, the result from this study will be used as a guide to modify and improve the current textile CAD program proposed for the two-dimensional simulation of the tricot.

• 자원환경지질
• /
• 제49권6호
• /
• pp.445-458
• /
• 2016

우리나라 수막재배 지역은 성수기에 지속적인 지하수 사용으로 인해 수막재배 말기에 지하수위 하강과 더불어 지하수 고갈 문제로 항시 어려움을 겪고 있다. 최근에 국내에서는 이러한 지역에서의 지하수 부족 현상을 해결하기 위해 몇 가지 인공함양 방법들이 적용되고 있다. 이 연구에서는 인공함양 방식 중 하나인 지중 침투형 갤러리 설치를 소개하고, 이 중 3개 갤러리에서의 인공 주입시험 결과를 이용하여 인공함양의 효율성을 예비적으로 평가하였다. 연구지역은 청주시 상대리 수막재배지이며, 갤러리의 규모는 가로${\times}$세로${\times}$깊이 $50cm{\times}300cm{\times}50cm$이다. 갤러리는 비닐하우스 동 사이의 이격 공간을 활용하여 설치하였으며, 터파기 작업, 자갈석과 규사 메움, 피조미터와 상부 부직포 설치 순서로 진행하였다. 3개 갤러리에 대한 인공 주입시험은 1차 예비, 2차 단계, 3차 장기 주입시험으로 구성된다. 1차 예비 시험에서 B 갤러리는 주입율 $33.29{\sim}33.84m^3/d$, $45.60{\sim}46.99m^3/d$일 때 수위 상승이 각각 20 cm, 30 cm, C 갤러리는 주입율 $21.1m^3/d$, $33.98m^3/d$, $41.69m^3/d$일 때 수위 상승이 각각 0 cm, 16 cm, 33 cm, D 갤러리는 주입율 $48.10m^3/d$, $52.23m^3/d$일 때 수위 상승이 각각 29 cm, 42 cm 정도를 유지한 것으로 나타났다. 단계 및 장기 주입시험 결과를 이용하여 각 갤러리에 대한 주입율과 수위 관계식이 정량적으로 도출되었으며, 이와 같은 인공 주입시험 결과는 수막재배 기간 중에 사용 후 배출되는 지하수가 갤러리를 통해 자연적으로 주입되는 수량을 추정하는 데에 정량적으로 활용될 수 있을 것으로 기대된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.877-881
• /
• 2005

In this paper, a novel method for analyzing a textile fabric structure is proposed to segment each yarn of the textile fabric from voxel data made out of its X-ray computed tomography (CT) images. In order to segment the each yarn, directions of fibers, of which yarn consists, are firstly estimated by correlating the voxel with a fiber model. Second, each fiber is reconstructed by clustering the voxel of the fiber using the estimated fiber direction as a similarity. Then, each yarn is reconstructed by clustering the reconstructed fibers using a distance which is newly defined as a dissimilarity. Consequently, each yarn of the textile fabric is segmented from the voxel data. The effectiveness of the proposed method is confirmed by experimentally applying the method to voxel data of a sample plain woven fabric, which is made of polyester two folded yarn. The each two folded yarn is correctly segmented by the proposed method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.13-18
• /
• 2003

Heat pipes with binary mixture fabricated and tested for applications where condenser temperature is in a range of $10^{\circ}C$ to $130^{\circ}C$. The pipe materials 8.0 mm O.D. cupper tube and the working fluids are ethanol-water mixtures. The total length of test of the heat pipe was 1710mm in which evaporator section was 1570mm, adiabatic section was 50mm and condenser section was 90mm. Mixing ratios of ethanol and water could be variable in mole fraction. Temperature of condenser section was $10^{\circ}C$, $80^{\circ}C$ and $130^{\circ}C$. Heat pipe performance experimental study was accomplished with change of mixing ratio in these temperatures. The fill charge ratio was 20% of the heat pipe volume. Wick structure was woven-wire and method of experimental work was that thermal load was increased 20W step until the heat pipe wall temperature reached at $150^{\circ}C$. Results were following: At coolant $10^{\circ}C$ and $130^{\circ}C$, mixing ratio that have beat thermal performance was 0.8M+ and at coolant $80^{\circ}C$, was 0.3 ${\sim}$ 0.5 M+.

• 한국의류산업학회지
• /
• 제2권3호
• /
• pp.227-233
• /
• 2000

The purpose of this study was to develop the High Functional Covering machine and the Compound Twister to produce the high value added textile goods and to meet the consumer's needs. For the study, 8 yarns and 12 fabrics were made with two developed machines and the tensile characteristics of the samples were tested and analysed. The result indicated that the sample fabrics kept their elongation regardless of buffering process. Elongation of the sample yarns was higher than those of yarns made with a traditional covering method. Elastic recovery of the sample fabrics was more effected by the recovery rate than by the number of extension and the characteristics of the sample yarns and fabrics were comparable to the yarns and fabrics made with a traditional covering method in terms of the position of Spandex yarns in their yarn structure and buffering effect.

• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.56-62
• /
• 2005

Fancy Yarn has developed diverse textures in fabrics, reducing the time in yarn and fabric production or apparel making in order to develop creative goods. In this study aimed to propose the use of a 4D box system to make fancy yarn shapes with loops, knops and spirals and the like. The change in texture was analysed and simulated to produce a suitable fabric image by using the fancy yarns fabric. The results are as follows. The plain weave, 2/2 basket weave, 2/2 twill weave, 2/2 2 complete broken weaves, and 5 harness sateen weaves were woven and a fabric image formed. In the case of the loop and the knop yarns fabric image, compared to the twisted fabric image the surface was covered by loops or some parts became partially black. In the case of the spiral shape it showed pattern continuity in spiral shapes 1, 2 and 3. The more twisted spirals produced a diamond shaped pattern or a twill line and a herring bone shaped twill line. An evenly distributed black fabric image appeared in 5 harness sateen weave. For the loop shape the broken weave or 5 harness sateen weave was produced; basket weave and broken weave for the knop yarn 1 or knop yarn 2; and for the spiral shape a plain fabric or 5 harness sateen weave were produced much similar to the fabric image. The surface texture of the mapped image compared to the twisted fabric image produces fancy yarn fabric images covered with loops or irregular spots caused by the knop and the spiral. Therefore it is appropriate or suitable for the simulation of tweed or woolen wool fabrics. The fabric image which produced consistent and continuous lines is therefore more suitable for simulations of twill or herringbone fabric images.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.317-328
• /
• 2017

This paper presents design and specific absorption rate analysis of a 2.4 GHz wearable patch antenna on a conventional and electromagnetic bandgap (EBG) ground planes, under normal and bent conditions. Wearable materials are used in the design of the antenna and EBG surfaces. A woven fabric (Zelt) is used as a conductive material and a 3 mm thicker Wash Cotton is used as a substrate. The dielectric constant and tangent loss of the substrate are 1.51 and 0.02 respectively. The volume of the proposed antenna is $113{\times}96.4{\times}3mm^3$. The metamaterial surface is used as a high impedance surface which shields the body from the hazards of electromagnetic radiations to reduce the Specific Absorption Rate (SAR). For on-body analysis a three layer model (containing skin, fats and muscles) of human arm is used. Antenna employing the EBG ground plane gives safe value of SAR (i.e. 1.77W/kg<2W/kg), when worn on human arm. This value is obtained using the safe limit of 2 W/kg, averaged over 10g of tissue, specified by the International Commission of Non Ionization Radiation Protection (ICNIRP). The SAR is reduced by 83.82 % as compare to the conventional antenna (8.16 W/kg>2W/kg). The efficiency of the EBG based antenna is improved from 52 to 74 %, relative to the conventional counterpart. The proposed antenna can be used in wearable electronics and smart clothing.