• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.6
• /
• pp.31-38
• /
• 2014

The purpose of this study is to make virtual machine using a 3D modeller to perform reverse engineering. Through the intuitive designer's ability, approximated model of the object is created and used to extract the data and NC tool path. The extracted data make approximated curve by using NURBS curve fitting. And the curve is used to remodel. From these series of process, the final reverse engineering data of the objects can be obtained. Two conclusions are drawn from this study. First, initial deviation of the intuitive model is one of the important factors that determine the number of repetitions of the experiment. Due to the characteristic of intuitive curve, after a certain number of repetitions the average deviation increase and radiate rather than decrease.

• Journal of Welding and Joining
• /
• v.17 no.3
• /
• pp.36-43
• /
• 1999

The effect of Si content in welding wires on spattering characteristics and droplet transfer phenomena was studied. In MAG welding using 80% Ar-20% $CO_2$ shielding gas, spattering characteristics and droplet transfer phenomena were varied with Si content of wire. With increasing Si content, the spattering ratio and the ratio of large size spatter $(d\geq1.0mm)$ were increased. The increase of Si content in molten metal made surface tension increase due to reduction of oxygen content, which resulted from deoxidizing action of silicon. The increase of surface tension resulted in unstable transfer phenomena and arc instability in both short circuit and spray region. With changing Si content of wire, spattering characteristics and droplet transfer phenomena was directly influenced by the variation of surface tension, compared with the effect of arc stability.

• Journal of the Optical Society of Korea
• /
• v.7 no.4
• /
• pp.269-274
• /
• 2003

In this paper, a Gaussian apodization technique applied to a transmission volume hologram for holographic demultiplexer is proposed. The Gaussian apodized grating of 15 mm ${\times}$ 11mm size, $38{\mu}m$ thickness and 3.2 mm horizontal standard deviation of the Gaussian index modulation profile was fabricated. A 22-channel demultiplexer based on that grating has been optically demonstrated. The channel spacing, the interchannel cross-talk level and the channel uniformity of 0.8 nm, -30 dB and 1.5 dB, respectively, were obtained.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.401-406
• /
• 2005

The GFSK Transceiver of 400MHz ISM band for data communication is designed and fabricated. To reduce the occupied bandwidth of transmitted signal, the GFSK modulation is selected. The measured results of fabricated transceiver show the data rate of 2400bps at 8.5kHz bandwidth, frequency deviation of less than $\pm$3kHz, sensitivity of -111dBm, SNR of 21.58dB. The fabricated transceiver is satisfied with the regulation of radio wave and has the good performance. This transceiver is well suited for data communication of 400MHz ISM band.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.459-468
• /
• 2009

Analysis of the uncertainty to have engineering solution of gas-dynamic and hydrodynamic problems is based on the comparison the prospective engineering solution with experimental result. In this paper, the mathematical model to estimate heat flux along gas-dynamic channel wall and the solution sequence are shown. Statistical information and generalizing experimental characteristics about gas- and hydro-dynamic channels were applied to the mathematical model. As the results, it is possible to draw a conclusion that models of the integrated approach, using the averaged statistical data of generalizing characteristics for a turbulent flow, without consideration of the turbulent mechanism (characteristic pulsations), can predict a nominal operating regime for gas-dynamic and hydrodynamic systems. The probable deviation of operating regime for newly designed the gas-dynamic channel can achieve 20% from a regime predicted on a basis 1-D or 3-D modelling irrespective of a kind of used models.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.93-101
• /
• 1998

In Integrated Tube Components(ITC) process in themanufacturing of color display tube, we describe the necessity of the convergence measurement method using photo sensors. Compared with methods using 1D or 2D cameras, its characteristics is to use of moving image patterns and fixed sensors. This measurement method is formulated as the measurement problem of the phase difference in phase changing periodic signals. The convergence measurement system using photo sensors, for the good performance, must have a small standard deviation for the repetitive measurement in the same condition and a fast measurement time for thecovergence change. By above two conditions, we proposed the real time measurement algorithm of the pahse difference using fundametal and harmonic in phase changing periodic signals. And, the proposed algorithm is applied to the convergence measurement system.

• Journal of Biosystems Engineering
• /
• v.24 no.1
• /
• pp.41-50
• /
• 1999

This study aims at detecting the three dimensional gripping points for the transplanting robot system to grip in the process of developing transplanting robot system, which is one of the automation systems for transplanting tissue culture. The stereo vision system equipped with two cameras has been used to detect the gripping points of the plant stem. The method for matching the plants of the image information which came from two cameras was to measure the total numbers of pixels, leaves, and the heights of the plants. The gripping points were detected near the roots after extracting the stem parts by the standard deviation of the X axis according to the Y axis. The performance test of the developed program showed that the detecting errors of the gripping points were 0∼1mm for X axis and 1∼2mm for Y & Z axis. The mean running time of the program was about 3 seconds.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.4
• /
• pp.251-258
• /
• 2005

Automatic document classification may differ significantly according to the characteristics of documents that are subject to classification, as well as classifier's performance. This research identifies e-mail document's characteristics to apply a three-step preprocessing algorithm that can minimize e-mail document's atypical characteristics. In the first 5go, uncertain based sampling algorithm that used Mean Absolute Deviation(MAD), is used to address the question of selection learning document for the rule generation at the time of classification. In the subsequent stage, Weighted vlaue assigning method by attribute is applied to increase the discriminating capability of the terms that appear on the title on the e-mail document characteristic level. in the third and last stage, accuracy level during classification by each category is increased by using Naive Bayesian Presumptive Algorithm's Dynamic Threshold. And, we implemented an E-Mail Recommendtion System using a three-step preprocessing algorithm the enable users for direct and optimal classification with the recommendation of the applicable category when a mail arrives.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.219-225
• /
• 1998

A voltage controlled oscillator for the local oscillator in 380 MHz TRS handset is designed and fabricated. To improve the phase noise characteristics, the NEC's 2SC4226 transistor with NF=1.2 at 1 GHz and Toshiba's 1SV229 varactor diode with Q=70 are used. And an inductor of VCO is realized by microstrip line. At the bias condition of 5 V and 10 mA, the output power and phase noise in the operating frequency range of 357∼387 MHz are above 3.7 dBm and 111 dBc/Hz at 12.5KHz offset from the carrier, respectively. And FM sensitivity deviation are within ±0.4 KHz. This VCO is well suited for TRS handset.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.11
• /
• pp.657-661
• /
• 2003

In this paper, we designed a portable digital pressure algometer which not only can measure the pain level objectively and quantitatively, but also is able to do RF communication. This system consists of pressure sensor for pain measurement, analog signal analysis, digital hardware based on PIC16C73B, RF communication and display. To evaluate the performance of the developed system, we measured pressure threshold using commercial analog PA(Pressure Algometer) and the proposed system, and then evaluated the correlation and confidence. Using linear regression analysis, standard deviation of 0.1731 and R-square value of 99.3% were obtained. In conclusion, the above results showed good performance and its usability in measuring the pain clinically.