• Journal of the Korean Society of Safety
• /
• v.15 no.3
• /
• pp.88-95
• /
• 2000

The level of noise produced by machinery and its arrangement insides a factory is indicated to be a maximum of 96.1 dB(A). The maximum level of noise from a commoner's house outside the factory is shown to be 62.9 dB(A), which exceeds 60 dB(A), the permitted limit of noise level in a time period of day. us study has predicted the level of noise reduction according to a step by step prevention plan by considering the characteristics of the causes of noise, the permitted limit of noise levels, problems and economical efficiency attendant upon the noise prevention measures. Establishing target levels of noise each of the three steps of the noise prevention plan. The predicted level of noise at the place of a commoner's house in accordance with the first step is 50.0 - 59.0 dB(A), and can satisfy the permitted limit of noise in a time period of the day. In taking prevention measures for the second step, the noise level is 50.7 - 53.6 dB(A) which is less than 55 dB(A) in a time period of the evening, the permitted limit of noise in a time period of night., and it can meet 47.4 - 50.3 dB(A) in the third step.

• Journal of Animal Science and Technology
• /
• v.64 no.3
• /
• pp.443-461
• /
• 2022

This study was conducted to assess the effects of the dietary supplementation of riboflavin (as a bile salt hydrolase [BSH] inhibitor) and Bacillus subtilis on growth performance and woody breast of male broilers challenged with Eimeria spp. Intestinal bacteria, including supplemented probiotics, can produce BSH enzymes that deconjugate conjugated bile salts and reduce fat digestion. A 3 × 2 × 2 (riboflavin × Bacillus subtilis × Eimeria spp. challenge) factorial arrangement of treatments in randomized complete block design was used. On d 14, birds were gavaged with 20× doses of commercial cocci vaccine (Coccivac^R -B52, Merck Animal Health, Omaha, NE). Dietary treatment of riboflavin and B. subtilis did not affect body weight (BW), body weight gain (BWG), and feed conversion (FCR) d 0 to 14 and overall d 0 to 41. Eimeria spp challenge reduced BWG, feed intake (FI), and increased FCR between d 14 to 28, but increased BWG and lowered FCR between d 28 to 35. There were no effects of the Eimeria spp. challenge on the overall d 0 to 41 FCR and FI, but BWG was reduced. Eimeria spp. challenge increased the abdominal fat pad weight and slight woody breast incidences on processed birds on d 42. Dietary inclusion of B. subtilis and riboflavin at tested levels did not help birds to mitigate the negative impact of Eimeria spp. challenge to enhance the growth performance.

• Journal of Chest Surgery
• /
• v.20 no.3
• /
• pp.603-609
• /
• 1987

The clinical, investigative, and surgical experiences were reviewed in four patients with congenitally corrected transposition of the great arteries who presented to the National Medical Center between August 1983 and August 1985. This condition is very rare congenital anomaly defined as the combination of atrioventricular discordance and transposition of the great arteries. Examples of primitive [single] ventricle inverted [that is, left sided in situs solitus] with outflow chamber were excluded in this paper. According to the sequential arrangement of the hearts there were two cases of [S,L,L] and two cases of [I,D,D]. The surgical approach should be focused on minimizing the risk of heart block and increasing the degree of relief of pulmonary outflow tract obstruction [POTO]. We experienced complete heart block in two cases of [S,L,L] and significant residual POTO in one case of [S,L,L] and one case of [I,D,D] postoperatively. There were one hospital mortality caused by complete heart block and residual POTO and two delayed mortalities caused by congestive heart failure and sepsis respectively.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.457-460
• /
• 2006

This study is to investigate the variation characteristics of run-up height over sandy beach due to the plane distribution of submerged breakwaters. In this study, Three-Dimensional numerical model with Large Eddy Simulation, which is able to simulate directly WAve Structure Seabed interaction (hereafter, LES-WASS-3D) has been newly developed. A comparison between the numerical model and existing experimental results was made to verify accuracy of newly proposed LES-WASS-3D model, and showed fairly nice agreement. In addition, based on the LES-WASS-3D model, the variation characteristics of run-up height over sandy beach are discussed with relation to the offshore distance and opening width of submerged breakwaters.

• The Journal of the Korea Contents Association
• /
• v.6 no.1
• /
• pp.14-22
• /
• 2006

The multimedia visualizational spreadsheet environment is shown to be extremely effective in supporting the organized visualization of multi-dimensional data sets. In this paper, we designed the visualization model that consists of the configurational 2D arrangement of spreadsheet elements at run time and each spreadsheet element has a novel framestack. As the feature, it supports 3D data structure of each element on the proposed model. It enables the visualization spreadsheet 1) to effectively manage, organize, and compactly encapsulate multi-dimensional data sets, 2) to reconfigure cell-structures dynamically according to client request, and 3) to rapidly process interactive user interface. Using several experiments with scientific users, the model has been demonstrated to be a highly interactive visual browsing tool for 2D and 3D graphics and rendering in each frame.

• Journal of KIBIM
• /
• v.9 no.3
• /
• pp.30-40
• /
• 2019

Extraction of fabrication documents is very important because it provides information related to tasks of fabrication and construction. Therefore, in the case of a prefabricated member such as a steel structure, it is necessary to improve the productivity of fabrication documents through 3D BIM. However, research and evidence data on direct comparison analysis of 3D BIM-based documents extraction versus 2D CAD-based documents extraction are hard to find. Thus, this study focuses on productivity analysis of 3D BIM based fabrication documents extraction. In this study, the productivity data of fabrication documents extraction for module construction of EPC project was analyzed. For the productivity analysis, a case study on the fabrication documents of Module A (1,965 sheets) and Module B (1,216 sheets) was conducted. Fabrication documents for each module include general arrangement drawing, assembly drawing, single part drawing and single plate drawing. Comparison of 2D CAD based fabrication documents extraction and 3D BIM based fabrication documents extraction, the productivity for the entire work was improved from 17 hours to 16 hours for Module A and 12 hours to 7 hours for Module B. Especially, the productivity of the assembly drawings, which occupies a large part of the fabrication documents, was improved by about 48.75% from the total time required from 281 hours to 144 hours.

• The Research Journal of the Costume Culture
• /
• v.31 no.1
• /
• pp.124-140
• /
• 2023

This study analyzes traditional women's Hu costumes of the Tang dynasty, and deploys a creative fashion design to converge contemporary and traditional styles. In this costume, women wear a robe with striped or plain patterns in the lower part of the pants, and it appears frequently in red and yellow colors. Depending on the sleeve, it is either a round collar or a turn down collar robe. In the Hu hat, the huntuomao and juanyanxumao were leather and mili and weimao were used to prevent the sand from flowing. This study uses the CLO 3D program with the "moment" theme based on the Hu costume for women to deploy 4 pairs of fashion design and to produce works for 2 pairs. The 3D virtual clothing program demonstrates important effects in design deployment and pattern arrangement through its efficiency and convenience of clothing production. The CLO 3D program was closely combined with the 2D design and the 3D affect, and it heightened the efficiency in saving the processing time and energy of the sample clothes. Through facilitating the 3D digital fashion design, the production may reduce time needed and contribute to an effective economy, and it may compare digital fashion design to actual products as well as illustrate the potential of digital fashion design.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.9
• /
• pp.1290-1298
• /
• 2001

A total of 371 weaned pigs were used in three experiments to evaluate the effects of spray dried plasma (SDP), soybean protein sources, and lactose on growth performance. In Exp. 1, 128 pigs (5.99 kg, $18{\pm}2d$) were used to evaluate the effect of SDP (0 vs 7%), lactose (0 vs 30%), and two soybean protein sources [soybean meal (SBM) and extruded soybean protein concentrate (ESPC)] in phase I (d 0 to 14) diets on pig performance in a $2{\times}2{\times}2$ factorial arrangement. Spray-dried plasma increased phase I ADG (p<0.01) and ADFI (p<0.05) in the SBM diets, but not in the ESPC diets. Lactose improved ADG and gain/feed ratio (G/F) in phase I (p<0.01). In Exp. 2, 144 pigs (5.50 kg, $17{\pm}3d$) were used to evaluate the effect of SDP (0 vs. 3.5%) and three soybean protein sources [SBM, ESPC, and soybean protein concentrate (SPC)] in phase I diets, and the effects of two different phase II (d 14 to 28) diets (simple vs complex) in a $2{\times}3{\times}2$ factorial arrangement of treatments. In phase I, SDP increased ADG (p<0.01) and improved G/F (p<0.05). Pigs fed SBM had the highest ADG and ADFI, with a G/F similar to the pigs fed ESPC. In phase II, pigs fed the complex diet had improved ADG (p<0.01), ADFI (p<0.05), and G/F (p<0.05) compared to the simple diet. In Exp. 3, 99 weaned pigs (5.77 kg, $17{\pm}3$d) were used to evaluate the effect of SBM, ESPC, and ESPC with SDP in the phase I diets. Pigs fed SBM with no blood product in the diet had the lowest ADG (p<0.01), ADFI (p<0.01), and G/F (p<0.05) in the first week of phase I. There were no differences in soybean protein sources fed in phase I diets on overall pig performance. These experiments are indicated that SDP and lactose improve the phase I performance. Soybean meal can be used as the major protein source in phase I diets with SDP.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.62-69
• /
• 1998

Spiral tube heat exchangers can find numerous applications in many engineering field. Flow in spital tubes is interest to engineers due to occurrence of secondary flow which enhances the cross-sectional mixing and the heat transfer rate. In the present study, an incompressible viscous 3-D flow in spiral tubes with rectangular cross-section of various torsion rate and Reynolds number is studied by using a finite volume method. It is shown that the axial velocity profile is affected by the secondary flow motion. Because there is some difference from correlation proposed by Hur et al., a lot of analysis and arrangement of experimental results are needed. This study showed the results of variation of hydrodynamic entry length for torsion and Re numbers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.147-159
• /
• 2000

The purpose of this study was the evaluation of spectral transmission of the commercial three shade guides and the relationship of hue, value, and chroma according to the transmission rate. The spectral transmittance of three shade guides - Vita Lumin Shade Guide, Vintage and Unibond Shade Guide, and Vitapan 3D-Master Shade Guide - were measured. For direct transmission measurements, each shade tabs were placed at the entrance port of the 1mm diameter intergrating sphere. The intensity of the light source passing through the shade tabs to the right angle was continuously recorded for wavelength from 400 to 700 nm. A transmission spectrum and digital data were obtained for each measurement and they were evaluated using Microcal Origin program. The obtained results of this study were as follows : 1. In Vita Lumin Shade Guide, sum of the transmission rate of the shade tabs at the wavelength 400-700nm was decreased in agreement with the arrangement order at each A, B, C, D group, except D4 shade tab. However, there were no relationships between the transmission rate of the shade tabs and the value-oriented. 2. In Vintage and Unibond Shade Guide, sum of the total transmission rate of the shade tabs was decreased in agreement with the arrangement order at each A, B, C, B group. When all shade tabs arranged in value-oriented, transmission rate was accord with the order, except D4 shade tab. 3. When shade tabs of the Vitapan 3D-Master Shade Guide have the same value and hue, sum of their total transmission rate decreased in accordance with the chroma-oriented. When the shade tabs have the same value and chroma, there were no differences from the order of the transmission rate to the various hue type. However, in the 'R' tabs of reddish hue type, the transmission rate increased at the long wavelength range area. In conclusion, we need the quantitative analyzing instruments in transmission determination. Vitapan 3D-Master Shade Guide covers the tooth color space taking into account the parameters of the systematic value, chroma, hue oriented, and the transmission rate relatively accorded with that sequence.