• 대한방사선치료학회지
• /
• 제25권1호
• /
• pp.69-75
• /
• 2013

목 적: 경기관지 근접치료에 이용되는 2차원 치료계획의 경우 환부를 확인하는 과정에서 종양의 위치 파악에 어려움이 있어 정확한 치료계획 분석이 어려울 수 있다. 이에 본 연구에서는 전산화단층모의치료기를 이용한 3차원 치료계획으로 환자의 치료계획을 비교 분석하고자 한다. 대상 및 방법: 2012년 6월 본원을 내원한 환자를 대상으로 전산화모의치료장비(Lightspeed RT, GE, USA)와 Oncentra Brachy planning system (Nucletron, Netherland)를 사용하여 3차원 치료계획을 시행하여 2차원 치료계획과 비교 분석하였다. 결 과: 분할 조사로 시행되는 경기관지 근접치료에서 매회 카테터의 위치 파악이 치료계획 상에서 확인 되었고, GTV 용적은 $3.5cm^3$, $3.3cm^3$로 확인 할 수 있었다. 또한 종양의 선량분포 파악이 용이하여 GTV에 대하여 첫 번째 치료 시 처방선량의 92%, 두 번째 치료 시 88%로 파악되어 선량전달 오차를 파악할 수 있었다. 결 론: 2차원 치료계획을 통한 근접치료의 문제점을 보완하기 위하여 치료용적과 선량분포의 정확한 파악과 분석이 가능한 3차원 치료계획으로 검증이 필요하고, 선량전달 오차를 정량적으로 파악하여 치료계획에 반영하는 과정이 필요하다고 생각된다.

• 한국방사선학회논문지
• /
• 제16권7호
• /
• pp.863-870
• /
• 2022

DLG (Dosimetric Leaf Gap)와 투과계수는 방사선치료계획 시스템에서 MLC 모델링의 중요 매개변수이다. 본 연구에서는 측정 용적이 다른 검출기를 이용하여 HD-MLC의 DLG와 투과계수를 측정하였고, DLG의 최적화를 통해 방사선 치료계획의 정확성을 평가하였다. 용적이 작은 Semiflux3D, MicroDiamond 검출기로 Dynamic Sweeping Gap 방법을 통해 DLG를 측정하였다. 측정된 DLG 값을 최적화할 수 있도록 10개의 방사선치료계획을 생성하고 QA결과와 비교하였다. 6, 8, 10 MV에서 Semiflux3D로 측정한 DLG는 0.76, 0.83, 0.85 mm 였고, MicroDiomond로 측정한 DLG는 0.78. 0.86, 0.9 mm 였다. 방사선치료계획 시스템에서 검출기로 측정한 DLG와 최적화된 DLG 값으로 생성한 10개의 치료계획을 Postal dosimetry로 QA하여 감마분석 하였다. 6 MV 광자선의 감마분석결과 2 mm/2% 기준에서 DLG 0.78 mm는 평균 94.3%였고, DLG 1.15 mm는 평균 98.4%였다. 10 MV 광자선에서도 DLG 0.9 mm는 평균 91.2%, DLG 1.25 mm는 97.6%였다. HD-MLC의 사용은 방사선치료계획 시스템에 정확한 모델링이 완성되어야 한다. DLG 값을 검출기로 측정하여 임상에 사용할 수 있지만, DLG 값의 최적화가 이루어진다면 환자에게 더 유용한 방사선 치료를 전달할 수 있을 것이다.

• Korean Journal of Radiology
• /
• 제21권12호
• /
• pp.1334-1344
• /
• 2020

Objective: Compressed sensing (CS) has gained wide interest since it accelerates MRI acquisition. We aimed to compare the 3D post-contrast T1-weighted volumetric isotropic turbo spin echo acquisition (VISTA) with CS (VISTA-CS) and without CS (VISTA-nonCS) in intracranial vessel wall MRIs (VW-MRI). Materials and Methods: From April 2017 to July 2018, 72 patients who underwent VW-MRI, including both VISTA-CS and VISTA-nonCS, were retrospectively enrolled. Wall and lumen volumes, signal-to-noise ratio (SNR), and contrast-to-noise ratio (CNR) were measured from normal and lesion sites. Two neuroradiologists independently evaluated overall image quality and degree of normal and lesion wall delineation with a four-point scale (scores ≥ 3 defined as acceptable). Results: Scan coverage was increased in VISTA-CS to cover both anterior and posterior circulations with a slightly shorter scan time compared to VISTA-nonCS (approximately 7 minutes vs. 8 minutes). Wall and lumen volumes were not significantly different with VISTA-CS or VISTA-nonCS (interclass correlation coefficient = 0.964-0.997). SNR was or trended towards significantly higher values in VISTA-CS than in VISTA-nonCS. At normal sites, CNR was not significantly different between two sequences (p = 0.907), whereas VISTA-CS provided lower CNR in lesion sites compared with VISTA-nonCS (p = 0.003). Subjective wall delineation was superior with VISTA-nonCS than with VISTA-CS (p = 0.019), although overall image quality did not differ (p = 0.297). The proportions of images with acceptable quality were not significantly different between VISTA-CS (83.3-97.8%) and VISTA-nonCS (75-100%). Conclusion: CS may be useful for intracranial VW-MRI as it allows for larger scan coverage with slightly shorter scan time without compromising image quality.

• 한국건축시공학회지
• /
• 제12권3호
• /
• pp.315-322
• /
• 2012

본 연구에서는 고로슬래그의 치환율이 80% 이상에 이르는 슬래그 대량 치환 콘크리트(High Volume Slag Concrete, HVSC)의 개발을 목표로 압축강도, 염해 및 동결융해 저항성에 미치는 고로슬래그의 영향 및 알칼리 자극제의 효과에 대해 평가하였다. 그 결과 고로슬래그 미분말의 치환율 증가에 따른 압축강도 발현특성은 초기 및 장기의 모든 재령에서 감소하였으며 염해 및 동결융해 저항성은 매우 우수한 것으로 나타났다. 한편 알칼리 자극제의 첨가에 따른 초기강도 발현특성은 현저히 개선되었으며 염해 및 동결융해 저항성 향상에 기여하는 효과가 큰 것으로 나타났다.

• The Plant Pathology Journal
• /
• 제22권2호
• /
• pp.155-160
• /
• 2006

A strain of Pepper mottle virus (PepMov) was isolated from chili pepper plants in Korea. In host range study, this virus, designated PepMoV-SNU1, shared most characteristics with PepMoV isolates reported previously. Thermal inactivation point ($45^{\circ}C\;to\;75^{\circ}C$) and dilution end point ($10^{-1}\;to\;10^{-4}$) of PepMoV-SNU1 showed differences depending on the propagation hosts. Cylindrical and pinwheel-shaped inclusions were always observed in pepper leaf tissues infected with the virus alone. Unexpectedly, a special structure of pinwheel shaped inclusion surrounded with unknown small spots was also observed in the leaf section when co-infected with a strain of pepper mild mottle virus. The partial sequence of coat protein gene and 3' untranslated region of PepMoV-SNU1 showed 98% identity with those of other PepMoV isolates. A primer pair derived from 3' end of the coat protein gene and poly A tail regions were designed. Optimal detection condition of PepMoV-SNU1 by RT-PCR was tested to determine appropriate annealing temperature and additional volumes of oligo-dT (18-mer), dNTP, and Taq polymerase. Under the optimized condition, an expected 500 Up PCR-product was detected in pepper leaves infected with PepMoV-SNU1 but not in healthy plants.

• 한국측량학회지
• /
• 제34권2호
• /
• pp.207-215
• /
• 2016

The demand for spatial data service technologies is increasing lately with the development of realistic 3D spatial information services and ICT (Information and Communication Technology). Research is being conducted on the real-time provision of spatial data services through a variety of mobile and Web-based contents. Big data or cloud computing can be presented as alternatives to the construction of spatial data for the effective use of large volumes of data. In this paper, the process of building HLM (Hyper Live Map) using multi-source data to acquire stereo CCTV and other various data is presented and a big data service architecture design is proposed for the use of flexible and scalable cloud computing to handle big data created by users through such media as social network services and black boxes. The provision of spatial data services in real time using big data and cloud computing will enable us to implement navigation systems, vehicle augmented reality, real-time 3D spatial information, and single picture based positioning above the single GPS level using low-cost image-based position recognition technology in the future. Furthermore, Big Data and Cloud Computing are also used for data collection and provision in U-City and Smart-City environment as well, and the big data service architecture will provide users with information in real time.

• 한국가정과학회지
• /
• 제5권1호
• /
• pp.48-61
• /
• 2002

This study was carried out to investigate the effects of four kinds of leavening agents on Jeung-Pyun fermantation. Milk-wine(M), fresh yeast(F), dry yeast(D), instant yeast(I) were used in Jeung-Pyun ingredients. The physicochemical properties, sensory evaluation were examined. The results of this study are summarized as follows: 1. Basic recipes for Jeung-Pyun by preliminary test were developed. 2. Specific volumes and expansion ratio of Jeung-Pyun was higher in the fresh yeast-added sample. 3. The pH of Jeung-Pyun was decreased significantly as the fermentation progressed 4. In the result comparing Jeung-Pyun extracting after 1st fermentation with Jeung-Pyun extracting 2nd fermentation by SEM, the former was widely distributed in stability of bubble and pore than the latter. 5. Standard recipe by Q.D.A. test added four kinds of leavening agents were as follows: (1)Jeung-Pyun added milk wine was 240min for 1st fermentation time, 60min for 2nd fermentation time, 35$^{\circ}C$ for fermentation temperature, 80% for fermentation humidity respectively. (2) Jeung-Pyun added fresh yeast was 90min for 1st fermentation time, 40min for 2nd fermentation time, 35$^{\circ}C$ for fermentation temperature, 80% for fermentation humidity respectively. (3)Jeung-Pyun added dry yeast was 90min for 1st fermentation time, 60min for 2nd fermentation time, 35$^{\circ}C$ for fermentation temperature, 60% for fermentation humidity respectively. (4)Jeung-Pyun added instant yeast was 90min for 1st fermentation time, 40min for 2nd fermentation time, 30$^{\circ}C$ for fermentation temperature, 60% for fermentation humidity respectively. 6.Based on sensory evaluation, Jeung-Pyun added fresh yeast was significantry higher than others in color, sweetness, moistness, softness, and overall quality. There was negative significance between milk wine flavor and astrigentness, and yeast flavor.

• Journal of Biosystems Engineering
• /
• 제32권4호
• /
• pp.263-268
• /
• 2007

An auto sampling and filtering unit was developed for monitoring automation of a fermentation process and its performance was evaluated. The automatic sampling and filtering unit was constructed with a glass filter, a diaphragm suction pump, and a flow direction change valve. To evaluate operating stability, delivery volumes of the suction pump were measured according to the experimental conditions of cellulose powder, pore size of the glass filter and suction head of the pump. The developed unit could deliver the sample solution under any experimental conditions except the filter pore size of $16{\mu}m$ and the suction head of 20cm. In case of the suction head of 30cm, the pump could not deliver the sample solution at all. Concentrations of the sample solutions were converged on those of the standard glucose solution after 8 minutes from the initial sampling time. The relative error of concentration between the sample and the standard solution showed 3.8, 4.8, 7.0% for the 1, 3, 5% contents of cellulose powder, respectively.

• Coupled systems mechanics
• /
• 제7권5호
• /
• pp.509-524
• /
• 2018

A hierarchical multi-scale modeling strategy devoted to the study of a Bitumen-Bound Gravel (BBG) is presented in this paper. More precisely, the paper investigates the temperature-dependent linear viscoelastic of the material when submitted to low deformations levels and moderate number of cycles. In such a hierarchical approach, 3D digital Representative Elementary Volumes are built and the outcomes at a scale (here, the sub-mesoscale) are used as input data at the next higher scale (here, the mesoscale). The viscoelastic behavior of the bituminous phases at each scale is taken into account by means of a generalized Maxwell model: the bulk part of the behavior is separated from the deviatoric one and bulk and shear moduli are expanded into Prony series. Furthermore, the viscoelastic phases are considered to be thermorheologically simple: time and temperature are not independent. This behavior is reproduced by the Williams-Landel-Ferry law. By means of the FE simulations of stress relaxation tests, the parameters of the various features of this temperature-dependent viscoelastic behavior are identified.

• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1124-1131
• /
• 2006

This paper presents a novel method to determine sound power level(PWL) emitted by a travelling vehicle for road traffic noise simulation. The PWL is evaluated by the equivalent sound pressure level (SPL) measured by close proximity method and the sound power correction factor derived from the maximum SPL measured by pass-by method and the propagation attenuation of vehicle noise during the pass-by measurement. Using the method, we derive the empirical formula for PWL estimation in 1/1-octave and overall frequency bands for 8 vehicles (automobile, SUV, small truck, large bus, trailer, 3 dump trucks) tested at two road surfaces (dense graded asphalt, 30mm transverse tinning concrete) of Korean highway test road. The suggested approach, if securing sufficient data to represent the acoustic characteristics of all vehicle types, has il strong merit to be able to evaluate sound power levels for any combination of vehicle categories and traffic volumes.