• The Korean Journal of Mycology
• /
• v.11 no.4
• /
• pp.177-181
• /
• 1983

To improve cultivation technique for the stable and high yield, the outdoor fermentation of rice straw bundles, and pasteurization and fermentation of rice straw compost in tunnel were carried out. 1) Mycelial growth of P. ostreatus was becoming rapid and dense according to prolongation of fermentation periods outdoor rice straw bundles, but days untill fully mycelial growth after spawning was short. 2) As the fermentation period of rice straw bundles was 6 days (three times turning), yield of P. ostreatus was the highest as $50.5kg/3.3m^2 and increased 24% of yield than those of conventional method. 3) When it was fermented rice straw compost in tunnel for 4 days, mycelial growth of P. ostreatus was rapid and dense, and also days untill budding after spawning, was shorter, yield $67.6kg/3.3m^2$, resulted in increasing 17% of yield than those of conventional method. 4) On being sterilization and fermentation of the rice straw compost in tunnel, the production cost was decreased 22.3% in compared with conventional method.

• Journal of Gastric Cancer
• /
• v.8 no.3
• /
• pp.141-147
• /
• 2008

Purpose: The aim of this study was to compare the short-term operative outcomes of laparoscopy-assisted total gastrectomy (LATG) with those of open total gastrectomy (OTG) for patients suffering with advanced upper gastric cancer. Materials and Methods: Of the 47 patients who underwent LATG with $D1+{\beta}$ or D2 lymphadenectomy from July 2004 to March 2008, 29 patients with pathologically proven advanced gastric cancer were compared with 35 patients who underwent conventional OTG during the same time period. The comparison was based on the clinicopathological characteristics, the surgical outcome, the follow-up survival and tumor recurrence. Results: The patients' age, gender and body mass index were similar between the two groups. However, there were statistically differences in tumor size ($9.2{\pm}3.9$ vs $6.1{\pm}3.6cm$, P=0.002) and the proximal resected margin ($2.1{\pm}2.0$ vs $3.6{\pm}2.1cm$ P=0.004). There was no significant difference in most of the peri- and post-operative courses such as the time to first flatus, the time to starting a solid diet and the length of the hospital stay, except for a longer operating time (289.0 vs. 361.3 minutes, P<0.001) in the LATG group. The complication rate was higher in the LATG group (13.8%) than that in the OTG group (5.7%). The mean overall survival and disease free survival times were 32 and 31 months, and 24 and 28 months, respectively, with an average 18.8 months follow-up duration. The main recurrent sites were peritoneum and lymph node in both groups. Conclusion: The early results of the current study suggest that LATG for AGC is technically feasible and it does not show any inferiorities of the postoperative outcomes as compared to those of conventional open total gastrectomy.

• Childhood Kidney Diseases
• /
• v.2 no.1
• /
• pp.77-81
• /
• 1998

The author exprienced a case of glycogen storage disease type Ia(GSD-I) in an 18-year-old male patient who was admitted to our hospital due to proteinuria and hypertension. he was suspected to have GSD when 12 years old because of his family history of short stature and hepatomegaly. On admission, physical examination revealed short stature, heparomegaly, and The diagnosis of GSD-I was confirmed by compatible liver biopsy finding and enzyme assay which erealeddeficiency of glcose-6-phosphatase if hepatocyte. Sympromatic treatment was done using antihypertensive drugs and allopurinol with diet control. The authors report a case of glycogen storage disease type Ia completely confirmed by typical clinical manifestation, pathologic findings of the liver and the kidney, and the result of enzyme assay which revealed deficiency of glucose-6-phosphatase in hepatocytes with brief review fo related literatures.

• Economic and Environmental Geology
• /
• v.40 no.3 s.184
• /
• pp.277-293
• /
• 2007

Seasonal and spatial variations in the concentrations of trace elements, pH and Eh were found in a creek watershed affected by mine drainage and leachate from several waste rock dumps within the As-Pb-rich Indae mine site. Because of mining activity dating back to about 40 years ago and rupture of the waste rock dumps, this creek was heavily contaminated. Due to the influx of leachate and mine drainage, the water quality of upstream reach in this creek was characterized by largest seasonal and spatial variations in concentrations of Zn(up to $5.830 mg/{\ell}$), Cu(up to $1.333 mg/{\ell}$), Cd(up to $0.031 mg/{\ell}$) and $SO_4^{2-}$(up to $173 mg/{\ell}$), relatively acidic pH values (3.8-5.1) and highly oxidized condition. The most abundant metals in the leachate samples were in order of Zn($0.045-13.909 mg/{\ell}$), Fe($0.017-8.730mg/{\ell}$), Cu($0.010-4.154mg/{\ell}$) and Cd($n.d.-0.077mg/{\ell}$), with low pH(3.1-6.1), and high $SO_4^{2-}$(up to $310 mg/{\ell}$). The mine drainage also contained high concentrations of Zn, Cu, Cd and $SO_4^{2-}$ and remained constantly near-neutral pH values(6.5-7.0) in all the year. While the leachate and mine drainage might not affect short-term fluctuations in flow, it may significantly influence the concentrations of chemicals in the stream. The abundance and chemistry of Fe-(oxy)hydroxide within this creek indicated that the Fe-(oxy)hydroxide formation could be responsible for some removal of trace elements from the creek waters. Spatial and seasonal variations along down-stream reach of this creek were caused largely by the influx of water from uncontaminated tributaries. In addition, the trace metal concentrations in this creek have been decreased nearly down to the background level at a short distance from the discharge points without any artificial treatments after hydrologic mixing in a tributary. The nonconservative(i.e. precipitation, adsorption, oxidation, dissolution etc.) and conservative(hydrologic mixing) reactions constituted an efficient mechanism of natural attenuation which reduces considerably the transference of trace elements to rivers.

• Clinical and Experimental Pediatrics
• /
• v.48 no.5
• /
• pp.527-533
• /
• 2005

Purpose : Long-term administration of anticonvulsants in children with epilepsy may cause short stature, hypocalcemia and low bone mineral density. This study was performed for the early detection of abnormal bone metabolism in children with epilepsy on taking anticonvulsants. Methods : Thirty children aged 5 to 16 years who were diagnosed with epilepsy were enrolled in this study. All had taken anticonvulsants for more than one year. Bone mineral density of lumbar vertebra was measured by dual-energy X-ray absorptiometry. Serum calcium, phosphorous, alkaline phosphatase, 25-hydroxycholecalciferol[$25(OH)D_3$], parathyroid hormone, and urine deoxypyridinoline were measured as biochemical bone markers. Bone age and body mass index were also calculated. Results : Bone minreal density, body mass index, bone age, and height were significantly decreased in two female patients who had taken two antiepileptic drugs for more than four years and they also had chronic diseases such as cerebral palsy with microcephaly, encephalomalacia, and microcephaly with atrial septal defect. Bone mineral density had significant positive correlations with body mass index(P<0.01) and bone age(P<0.01). Conclusion : This study showed chronic medication of anticonvulsants in children may cause low bone mineral density and short stature. Bone age and body mass index could be the important surrogate markers to find the population at risk. More studies, including a large study population and long term cohort study, will be required.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.482-491
• /
• 1997

The effect of addition of fractionated milk fats on the composition and melting behavior of cocoa butter was investigated. High melting fraction (HMF) of milk fat fractions had the highest contents of long chain fatty acid $(C16{\sim}C18)$ and saturated fatty acid followed by medium melting fraction 1 (MMF1), medium melting fraction 2 (MMF2), anhydrous milk fat (AMF), and low melting fraction (LMF) in a decreasing order. MMF2 had the highest contents of the short chain fatty acid $(C4{\sim}C10)$ and medium chain fatty acid $(C12{\sim}C14)$ followed by AMF, HMF, MMF1, and LMF in a decreasing order. When the fractionated milk fats were added to cocoa butter, the long chain fatty acid contents increased with increasing the ratio of fractionated milk fats. The saturated fatty acid contents decreased only when the LMF was added. The higher content of long chain triglyceride and the lower contents of short chain triglyceride and medium chain triglyceride were obtained from the fractionated milk fat of higher melting point. When the fractionated milk fats were added to cocoa butter, long chain triglyceride contents decreased with increasing the ratio of the fractionated milk fats. The melting points of cocoa butter, AMF, HMF, MMF1, MMF2, LMF were $33.3^{\circ}C,\;31.2^{\circ}C,\;40.6^{\circ}C,\;37.4^{\circ}C,\;33.5^{\circ}C$, and $6.5^{\circ}C$, respectively. Cocoa butter had the highest content of solid fat followed by HMF, MMF1, MMF2, AMF, and LMF in a decreasing order. When the fractionated milk fat was added to cocoa butter at various temperatures, the solid fat content in the mixture of fractionated milk fat and cocoa butter decreased with increasing the ratio of fractionated milk fat. This results suggested that anhydrous milk fat and fractionated milk fats had a good compatibility with cocoa butter.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.63-73
• /
• 2015

This work proposes a 2-channel time-interleaved (T-I) 10b 120MS/s pipeline SAR ADC minimizing offset mismatch between channels without any calibration scheme. The proposed ADC employs a 2-channel SAR and T-I topology based on a 2-step pipeline ADC with 4b and 7b in the first and second stage for high conversion rate and low power consumption. Analog circuits such as comparator and residue amplifier are shared between channels to minimize power consumption, chip area, and offset mismatch which limits the ADC linearity in the conventional T-I architecture, without any calibration scheme. The TSPC D flip-flop with a short propagation delay and a small number of transistors is used in the SAR logic instead of the conventional static D flip-flop to achieve high-speed SAR operation as well as low power consumption and chip area. Three separate reference voltage drivers for 4b SAR, 7b SAR circuits and a single residue amplifier prevent undesirable disturbance among the reference voltages due to each different switching operation and minimize gain mismatch between channels. High-frequency clocks with a controllable duty cycle are generated on chip to eliminate the need of external complicated high-frequency clocks for SAR operation. The prototype ADC in a 45nm CMOS technology demonstrates a measured DNL and INL within 0.69LSB and 0.77LSB, with a maximum SNDR and SFDR of 50.9dB and 59.7dB at 120MS/s, respectively. The proposed ADC occupies an active die area of 0.36mm2 and consumes 8.8mW at a 1.1V supply voltage.

• Explosives and Blasting
• /
• v.30 no.2
• /
• pp.1-8
• /
• 2012

The only law related to airblast and ground vibration control in Korea is the Noise and Vibration Control Act enforced by the Ministry of Environment. But this law mainly deals with the annoyance aspects of noises and vibrations in ordinary human life. Hence, the law defines the safety criteria of ground vibration as the vibration level (VL) of dB(V) unit. The ground vibrations produced from blasting, however, have the unique characteristics that can be shown in shock vibrations, and the duration is also very short compared to the vibrations from machinery, tools or facilities. Hence, vibration regulations for blasting operations usually define the safety criterion as the peak particle velocity (PPV) considering the effect of ground vibrations to structural damage. Notwithstanding, there are several attempts that predict VL from PPV or estimate VL based on the scaled distances (SD; in unit of $m/kg^{1/2}$ or $m/kg^{1/3}$) without considering their frequency spectra. It appears that these attempts are conducted mainly for the purpose of satisfying the law in blasting contracts. But, in principle there could no correlation between peaks of velocity and acceleration over entire frequency spectrum. Therefore, such correlations or estimations should be conducted only for the waves with the same or very similar frequency spectra.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.55-55
• /
• 2009

Silicon Carbide (SiC) is a material with a wide bandgap (3.26eV), a high critical electric field (~2.3MV/cm), a and a high bulk electron mobility (${\sim}900cm^2/Vs$). These electronic properties allow high breakdown voltage, high frequency, and high temperature operation compared to Silicon devices. Although various SiC DMOSFET structures have been reported so far for optimizing performances. the effect of channel dimension on the switching performance of SiC DMOSFETs has not been extensively examined. In this paper, we report the effect of the interface states ($Q_s$) on the transient characteristics of SiC DMOSFETs. The key design parameters for SiC DMOSFETs have been optimized and a physics-based two-dimensional (2-D) mixed device and circuit simulator by Silvaco Inc. has been used to understand the relationship with the switching characteristics. To investigate transient characteristic of the device, mixed-mode simulation has been performed, where the solution of the basic transport equations for the 2-D device structures is directly embedded into the solution procedure for the circuit equations. The result is a low-loss transient characteristic at low $Q_s$. Based on the simulation results, the DMOSFETs exhibit the turn-on time of 10ns at short channel and 9ns at without the interface charges. By reducing $SiO_2/SiC$ interface charge, power losses and switching time also decreases, primarily due to the lowered channel mobilities. As high density interface states can result in increased carrier trapping, or recombination centers or scattering sites. Therefore, the quality of $SiO_2/SiC$ interfaces is important for both static and transient properties of SiC MOSFET devices.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.10
• /
• pp.1364-1373
• /
• 2012

Four crossbred (75% Holstein Friesian) lactating dairy cows, with an average live weight of $418{\pm}5$ kg and $36{\pm}10$ d in milk were randomly assigned according to a $2{\times}2$ factorial arrangement in a $4{\times}4$ Latin square design to evaluate the effects of cassava hay (CH) and rice bran oil (RBO) on feed intake, nutrient digestibility, ruminal fermentation, milk yield, and milk composition. Factor A was non-supplementation or supplementation with CH in the concentrate. Factor B was supplementation with RBO at 0% or 4% in the concentrate mixture. The four dietary treatments were (T1) control (Concentrate with non-CH plus 0% RBO; C), (T2) Concentrate with CH plus 0% RBO (CH), (T3) Concentrate with non-CH plus 4% RBO (RBO), and (T4) Concentrate with CH plus 4% RBO (CHRBO). The cows were offered concentrate, at a ratio of concentrate to milk production of 1:2, and urea-lime treated rice straw was fed ad libitum. Urea-lime treated rice straw involved 2.5 g urea and 2.5 g $Ca(OH)_2$ (purchased as hydrated lime) in 100 ml water, the relevant volume of solution was sprayed onto a 100 g air-dry (91% DM) straw, and then covering the stack with a plastic sheet for a minimum of 10 d before feeding directly to animals. The CH based concentrate resulted in significantly higher roughage intake and total DM intake expressed as a percentage of BW (p<0.05). Ruminal pH, $NH_3$-N, BUN and total VFA did not differ among treatments, while RBO supplementation increased propionate, but decreased acetate concentration (p<0.05). Furthermore, the population of total ruminal bacteria was significantly lower on the RBO diet (p<0.05). In contrast, the total ruminal bacteria and cellulolytic bacteria on the CH diet were higher than on the other treatments. Supplementation with CH increased (p<0.05) F. succinogens and R. flavefaciens populations, whereas the populations of B. fibrisolvens and M. elsdenii were increased on the RBO diet. In addition, supplementation with CH and RBO had no effect on milk production and composition in dairy cows, while fatty acid composition of milk was influenced by RBO supplementation, and resulted in significantly lower (p<0.05) concentrations of both short-chain and medium-chain FA, and increased (p<0.05) the proportion of long-chain FA in milk fat, as well as significantly increased cis-9, trans-11 CLA and total CLA. In conclusion, RBO or CH exhibited specific effects on DMI, rumen fermentation, microbial population, milk yield and composition in lactating dairy cows, which were not interactions between CH and RBO in the diets. Feeding lactating dairy cows with RBO could improve fatty acid in milk fat by increasing cis-9, trans-11 CLA.