• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.79-79
• /
• 1999

The varous techniques for fabrication of si or metal tip as a field emission electron source have been reported due to great potential capabilities of flat panel display application. In this report, 240nm thermal oxide was initially grown at the p-type (100) (5-25 ohm-cm) 4 inch Si wafer and 310nm Si3N4 thin layer was deposited using low pressure chemical vapor deposition technique(LPCVD). The 2 micron size dot array was photolithographically patterned. The KOH anisotropic etching of the silicon substrate was utilized to provide V-groove formation. After formation of the V-groove shape, dry oxidation at 100$0^{\circ}C$ for 600 minutes was followed. In this procedure, the orientation dependent oxide growth was performed to have a etch-mask for dry etching. The thicknesses of the grown oxides on the (111) surface and on the (100) etch stop surface were found to be ~330nm and ~90nm, respectively. The reactive ion etching by 100 watt, 9 mtorr, 40 sccm Cl2 feed gas using inductively coupled plasma (ICP) system was performed in order to etch ~90nm SiO layer on the bottom of the etch stop and to etch the Si layer on the bottom. The 300 watt RF power was connected to the substrate in order to supply ~(-500)eV. The negative ion energy would enhance the directional anisotropic etching of the Cl2 RIE. After etching, remaining thickness of the oxide on the (111) was measured to be ~130nm by scanning electron microscopy.

• Journal of the Korean Institute of Gas
• /
• v.13 no.3
• /
• pp.49-53
• /
• 2009

Relief systems can improve the process safety because it has the function for the prevention of overpressure. Flare stacks is necessary to avoid explosion, radiation, or toxicity by waste-gas emitted from relief system. Safe combustion is one of the important factors to improve safety and the quantity and velocity emitted is ruled in the API code 521. Due to the pressure of released gas and mass flow, a flame from flare stack is similar to jet fire. In this study, we have investigated the effect of flame form on complete combustion and heat emission. API code was similar to jet fire model in flame length, the flame had an effect on the ground.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.90-96
• /
• 2013

As the need of electric motor is increased rapidly throughout our society, the various application fields are created and the service market called robot gets expanded as well as the existing industrial market. Out of those, the joint systems such as humanoid that is servo actuator for position control or all fields which require multi-degree of freedom (multi-DOF) require the development of innovative actuator. It is multi-DOF spherical motor that can replace the existing system in multi-DOF operating system. But, multi-DOF spherical motor that has been researched up to date is at the stage which is insufficient in performance or mechanical practicality yet. Thus, first of all the research results and limitation of the previously-researched guide frame-type spherical motors were analyzed and then the feature of double air-gap spherical motor which was devised to complement that was studied. The double air-gap multi-DOF spherical motor is very suitable spherical motor for system applying which requires the multi-DOF operation due to its simple structure that does not require other guide frame as well as performance improvement due to its special shape which has two air-gaps. So, the validity of the study was verified by designing and producing it with 3D-FEM through the exclusive jig for multi-DOF spherical motor.

• Microbiology and Biotechnology Letters
• /
• v.28 no.5
• /
• pp.270-278
• /
• 2000

The study was performed to investgate the excellent microbial anticaries substance which is more effective that the chlorhexidine in the dental caries treatment. A typi-cal strain which produced the most excellent antimicrobial subatance was selected. and identified novel alkalophillic Bacillus alkalophilshaggy JY-827. For the maximal production of themicrobial antibiotic against Streptococcus mutans from B. alkalophilshaggy JY-827, the optimal culture condition was in the medium containing glucose 15g/ L, pepton 10g/L and $K_2$$HPO_4$ 2g/L the highest production of antibiotic against S.mutans was obtained at $25^{\circ}C$ and pH 11.0 for 5 days. The antibiotic from B. alkalophilshaggy JY-827 was purified by organic solvent extraction, silica gel and sephadex LH-20 column chromatograpies, and then crystallized with methanol. The crystallin compoma-tion of this antibiotic was as a curcular shape. The melting point and rm[$\alpha$]$D^{20}$ were 152-154$^{\circ}C$ and +55。, respec-tively. Based on Instumental analyses such as FT-IR, $^{1}$H-NMR $^{13}$ C-NMR and GC-mass, the antibiotic was identified as aminoglycoside. It was obtained as amorphous white power, and soluble in water power, and soluble in water, methanol but insoluble in ether, chroloform. This antibiotic inhibited the growth of S.mutans to about 3 day at the concentration of $2.5$\times$10^{-7}$ /M. It was stable at the alkalli condition but unstable within the acid condition. It was also stable up to $70^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.8
• /
• pp.1190-1196
• /
• 2006

This experiment was carried out to investigate the effects of Korean, Japanese and Chinese green tea on laying performance and egg quality in hens. A total of 168 "Tetran Brown" hens aged 40 weeks were assigned to 7 treatments in a completely randomized design. Each treatment had 4 replicates accommodating 6 layers per replication. The seven dietary treatments were: 1) control diet with no green tea added, 2) diet containing 1.0% Korean green tea (1.0% KGT), 3) diet containing 2.0% Korean green tea (2.0% KGT), 4) diet containing 1.0% Japanese green tea (1.0% JGT), 5) diet containing 2.0% Japanese green tea (2.0% JGT), 6) diet containing 1.0% Chinese green tea (1.0% CGT), and 7) diet containing 2.0% Chinese green tea (2.0% CGT). Egg production rate of the layers fed diets containing 1.0 or 2.0% green tea powders were significantly increased compared to that of the control (p<0.05). The egg weight of layers was significantly reduced in layers fed 1.0% CGT (p<0.05). The feed intake was significantly decreased in KGT and CGT groups at 2.0% inclusion levels (p<0.05). The egg shell thickness and shape index of JGT treatment was significantly lower than that of the control (p<0.05). There were no significant differences in albumen index, yolk index and Haugh unit of eggs for layers fed diets containing green tea powders regardless of origin (p>0.05). Green tea feeding to layers tended to reduce the overall cholesterol content of egg yolk. Particularly, 1.0 or 2.0% CGT significantly depressed the total cholesterol content of egg yolk (p<0.05). In conclusion, incorporation of 1.0 or 2.0% Korean, Japanese and Chinese green tea into layer diets regardless of origin had favorable effects on laying performance and egg quality profiles. Among the three green tea sources, the Chinese green tea powder had the highest reducing effect on cholesterol content in egg yolk.

• Journal of The Korean Association of Information Education
• /
• v.13 no.3
• /
• pp.393-400
• /
• 2009

As one of leading media converging broadcasting and telecommunications, IPTV is required to pursuit the idea of public interest from broadcasting industry and universal service from telecommunications industry as well as satisfying industrial effect. It needs to consider both industrial effect and public benefit when vitalizing IPTV services. The project of providing IPTV-based interactive public services is expected to enhance accessibility of public services, present shape of new public service in broadcasting-telecommunication convergence environment, resolve the shortage in contents supply which is one of most important problems in IPTV services. In this research understanding the overall response such as service usage status, satisfying/dissatisfying factor, trend of preference of the customer using IPTV-based interactive public services, we analyze what the public service mean in IPTV environment and public identity of IPTV. And we have investigate effective developing method and ripple effect of IPTV-based public services on broadcasting and telecommunications converged ecosystems.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.1-6
• /
• 2010

This study presents the practical design modification to improve the retracting performance of the pyro-typed high power pretensioner. 3 components of the pretensioner are redesigned and the usefulness of the design modification is verified by the experiment. During the pretensioning process, the gas blast generated from the gunpowder is transferred to the rack-pinion gear through the manifold. The rack-pinion gear is connected with the spool where the webbing is rolled up. According to the rotation of the pinion, the spool is turned and the webbing is winded. To help the gas blast flow well, the shape of the inner cross section of the manifold is changed. The spur gear design program is developed and used to find the best combination of the rack-pinion gear pair to increase the power transmission efficiency. The pinion guide is installed on the spool to prevent the vibration of the pinion. As a result of the experiment, the amount of the web retraction length is increased when every single design modification is applied. Therefore, the retracting performance of the pretensioner is considered to be improved if the presented design modifications are applied.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.1
• /
• pp.21-27
• /
• 2002

Inspection and shape measurement of three-dimensional objects are widely needed in industries for quality monitoring and control. A number of visual or optical technologies have been successfully applied to measure three-dimensional surfaces. However, those conventional visual or optical methods have inherent shortcomings such as occlusion and variant surface reflection. X-ray vision system can be a good solution to these conventional problems, since we can extract the volume information including both the surface geometry and the inner structure of any objects. In the x-ray system, the surface condition of an object, whether it is lambertian or specular, does not affect the inherent characteristics of its x-ray images. In this paper, we propose a three-dimensional x-ray imaging method to reconstruct a three dimensional structure of an object out of two dimensional x-ray image sets. To achieve this by the proposed method, two or more x-ray images projected from different views are needed. Once these images are acquired, the simultaneous algebraic reconstruction technique(SART) is usually utilized. Since the existing SART algorithms have several shortcomings such as low performance in convergence and different convergence within the reconstruction volume of interest, an advanced SART algorithm named as USART(uniform SART) is proposed to avoid such shortcomings and improve the reconstruction performance. Because, each voxel within the volume is equally weighted to update instantaneous value of its internal density, it can achieve uniform convergence property of the reconstructed volume. The algorithm is simulated on various shapes of objects such as a pyramid, a hemisphere and a BGA model. Based on simulation results the performance of the proposed method is compared with that of the conventional SART method.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.1
• /
• pp.79-92
• /
• 2002

This paper describes a research work of developing computer-aided design of a product with bending and piercing for progressive working. An approach to the system for progressive working is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, strip layout and die layout modules. The system is designed by considering several factors, such as bending sequences by fuzzy set theory, complexities of blank geometry, punch profiles, and the availability of a press equipment. Strip layout drawing generated in the strip layout module is presented in 3-D graphic farms, including bending sequences and piercing processes with punch profiles divided into for external area. The die layout module carries out die design for each process obtained from the results of the strip layout. Results obtained using the modules enable the manufacturer for progressive working of electric products to be more efficient in this field.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.54-65
• /
• 1997

To quantify the LII signals from soot particle of flames in diesel engine cylinder, a new method has been proposed for correcting LII signal attenuated by soot particles between the measuring point and the detector. It has been verified by an experiment on a laminar jet ethylene-air diffusion flame. Being proportional to the attenuation, the ratio of LII signal at two different detection wavelengths can be used to correct the measured LIIsignal and obtain the unattenuated LII signal, from which the soot volume fraction in the flame can be estimated. Both the 1064-nm and frequency-doubled 532-nm beams from the Nd : YAG laser are used. Single-shot, one-dimensional(1-D) line images are recorded on the intensified CCD camera, with the rectangular-profile laser beam using 1-mm-diameter pinhole. Two broadband optical interference filters having the center wavelengths of 647 nm and 400 nm respectively and a bandwidth of 10 nm are used. This two-wavelength correction has been applied to the ethylene-air coannular laminar diffusion flame, previously studied on soot formation by the laser extinction method in this laboratory. The results by the LII measurement technique and the conventional laser extinction method at the height of 40 nm above the jet exit agreed well with each other except around outside of the peaks of soot concentration, where the soot concentration was relatively high and resulting attenuation of the LII signal was large. The radial profile shape of soot concentration was not changed a lot, but the absolute value of the soot volume fraction around outside edge changed from 4ppm to 6.5 ppm at r=2.8mm after correction. This means that the attenuation of LII signal was approximately 40% at this point, which is higher than the average attenuation rate of this flame, 10~15%.