• 제목/요약/키워드: 3D Production

검색결과 5,017건 처리시간 0.037초

2001년 농작물 병해 발생개황 (Review of Disease Incidence of Major Crops in 2001)

  • 김충희
    • 식물병연구
    • /
    • 제8권1호
    • /
    • pp.1-10
    • /
    • 2002
  • 2001년 기상의 특징은 3월부터 5월까지 계속된 극심한 가뭄과 생육기간 내내 계속된 고온현상 그리고 별다른 태풍의 내습 없이 9, 10월 수확기 맑은날의 지속으로 요약할 수 있다. 벼는 순조로운 기상 때문에 잎, 이삭도열병, 세균성벼알마름병, 흰잎마름병, 잎집무늬마름병의 발생이 예년에 비해 경미하였으나, 감비추진 정책에 의해 생육후기 깨씨무늬병이 발생하여 전국적으로 문제시되었으며 그동안 발생이 적었던 줄무늬잎마름병이 경기, 충청, 호남 서해안지역을 중심으로 많이 발생하였다. 고추는 생육기 비가 많이 왔던 전남북 지역에서 역병 발생이 심하였으며 토마토와 오이는 대부분 예년에 비해 병발생이 적었다. 수박의 경우는 꽃자리 부분이 썩는 푸른곰팡이병이 전국적으로 발생하였으며 CGMMV는 전년에 비해 상당폭 발생면적이 감소하였고 노지재배의 경우 탄저병 발생이 예년에 비해 심하였다. 참외와 딸기도 전년에 비하여 병발생이 경미하였으며 예년에 발생이 많았던 참외의 급성위조증상도 발생이 대폭 감소하였다. 마늘·양파의 흑색썩음균핵병은 봄철의 가뭄과 고온현상으로 병발생의 전년의 절반수준으로 감소하였다. 감자의 풋마름병은 발병포장이 증가하는 경향이었으며 고구마의 덩굴쪼김병도 발생이 감소하였다. 사과의 경우 전반적으로 병 발생이 예년에 비해 경미하였으며 배는 흰가루병이 많이 발생하였다. 맥류의 붉은곰팡이병은 예년처럼 거기 발생이 없었다.

섬바디의 건조에 관한 연구 (Study on Seombody Drying)

  • 박경규;정창주
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.55-55
    • /
    • 1976
  • An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe?rature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

섬바디의 건조에 관한 연구 (Study on Seombody Drying)

  • 박경규
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.56-63
    • /
    • 1976
  • An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe\ulcornerrature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

  • PDF

열화학 사이클 H2 제조를 위한 (Co0.5 Mn0.5)Fe2O4의 열적 거동 (Thermal Behavior of (Co0.5 Mn0.5)Fe2O4 for Hydrogen Generation by Thermochemical Cycle)

  • 신현창;최승철;김철성;김종원;주오심;정광덕
    • 한국수소및신에너지학회논문집
    • /
    • 제13권2호
    • /
    • pp.143-150
    • /
    • 2002
  • The thermal behavior of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ prepared by a co-precipitation wasinvestigated for Hz generation by the thermochemical cycle. The reduction reaction of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ started from $480^{\circ}C$, and the weight loss was 1.6 wt% up to $1100^{\circ}C$. At this reaction, $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ was reduced by release of oxygen bonded with the $Fe^{3+}$ ion in the B site of ($CO_{0.5}$ $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$. In the $H_2O$ decomposition reaction, $H_2$ was generated by oxidationof reduced $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$. The crystal structure of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ for reduction reaction maintained spinel structure and the lattice constant of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ ($8.41\AA$) was enlarged to $8.45\AA$. But the lattice constant of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ after $H_2O$ decomposition reaction did not change to $8.45\AA$. Then, $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ is excellent material in the thermochemical cyclic reaction due to release oxygen at low temperature for the reduction reaction and produce $H_2$ maintaining crystal structure for redox reaction.

Effects of feeding different varieties of faba bean (Vicia faba L.) straws with concentrate supplement on feed intake, digestibility, body weight gain and carcass characteristics of Arsi-Bale sheep

  • Wegi, Teklu;Tolera, Adugna;Wamatu, Jane;Animut, Getachew;Rischkowsky, Barbara
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제31권8호
    • /
    • pp.1221-1229
    • /
    • 2018
  • Objective: A study was conducted to evaluate the varietal differences among faba bean straws and also to assess the potentials of faba bean straws supplemented with concentrate fed at the rate 70% straws and 30% concentrate mixture on feed intake, digestibility, body weight gain and carcass characteristics of the animals. Methods: Forty yearling Arsi-Bale sheep with initial body weight of $19.85{\pm}0.29kg$ (mean${\pm}$standard deviation) were grouped in a randomized complete block design into eight blocks of five animals each based on their initial body weight. Straws included in the study were from Mosisa (T1M), Walki (T2W), Degaga (T3D), Shallo (T4S), and local (T5L) varieties of faba bean and concentrate (2:1 ratio of wheat bran to "noug" seed cake). The experiment consisted of seven days of digestibility and 90 days of feeding trials followed by evaluation of carcass parameters at the end. Results: Local variety had lower (p<0.05) in grain and straw yield compared to improved varieties but higher in crude protein, metabolizable energy contents and in vitro organic matter digestibility. The apparent digestibility of dry matter and crude protein of sheep fed Walki and Mosisa straws were higher than (p<0.05) straws from Shallo varieties. Sheep fed Walki straw had greater (p<0.05) dry matter intake, average daily gain and feed conversion efficiency than sheep fed local and Shallo straws. Slaughter body weight and empty body weight were higher (p<0.05) for sheep fed Mosisa and Walki straws as compared to sheep fed Shallo straws. Apart from this, the other carcass components were not affected (p>0.05) by variety of the faba bean straws. Conclusion: There is significant varietal differences between faba bean straws both in quality and quantity. Similarly, significant variation was observed in feed intake, digestibility, body weight gain and feed conversion efficiency among sheep fed different straws of faba bean varieties with concentrate supplement. Based on these results, Walki and Mosisa varieties could be recommended as pulse crop rotation with cereals in the study area.

Intake, digestibility, and performance of lambs fed spineless cactus cv. Orelha de Elefante Mexicana

  • Lopes, Levi Auto;de Andrade Ferreira, Marcelo;Batista, Angela Maria Vieira;Maciel, Michel do Vale;Barbosa, Rodrigo de Andrade;Munhame, Joana Albino;da Silva, Tomas Guilherme Pereira;Cardoso, Daniel Barros;Veras, Antonia Sherlanea Chaves;de Carvalho, Francisco Fernando Ramos
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제33권8호
    • /
    • pp.1284-1291
    • /
    • 2020
  • Objective: To evaluate the effects of the carmine cochineal-resistant spineless cactus genotypes cv. Orelha de Elefante Mexicana (Opuntia) and Miúda (Nopalea) on the intake and digestibility of nutrients, ingestive behavior, performance, and ultrasound measurements of growing lambs. Methods: Thirty-six male (non-castrated) Santa Inês lambs were used, with an average age of 6 months and an initial average weight of 22.0±2.9 kg. They were distributed in a completely randomized design with 3 treatments (Tifton hay, Nopalea and Opuntia) and 12 replications, using initial weight as a covariate. The experimental period was 86 days, with the first 30 days used for the adaptation of the animals to the facilities, diets and management, and the remaining 56 days used for evaluation and data collection. Results: The intake and apparent digestibility of dry matter (DM), organic matter (OM), crude protein (CP), neutral detergent fiber (NDF), total carbohydrates (TC), non-fibrous carbohydrates (NFC), and total digestible nutrients (TDN) showed a significant difference (p<0.05) as a function of the diets, with the Nopalea treatment (p<0.05) increasing DM intake (g/kg and % body weight [BW]), CP, TDN, and TC digestibility, whereas the Tifton hay diet led to a high (p<0.001) neutral detergent fiber corrected for ash and protein (NDFap) g/d intake, NDFap (BW %) and digestibility of said nutrient. There was no effect of treatments (p>0.05) on feeding time, however, rumination time and total chewing time were higher (p<0.05) for animals fed Tifton hay. The performance of the animals was similar (p>0.05). For the ultrasound measurements, Nopalea promoted an increase in the final loin eye area, compared to Tifton hay. Conclusion: The use of spineless cactus variety Miúda leads to the greater intake and digestibility of nutrients. The evaluated carmine cochineal-resistant spineless cactus genotypes are alternatives for semi-arid regions as they do not negatively affect the performance of growing lambs.

STUDIES ON THE TISSUE CULTURE OF PANAX GINSENG

  • Harn C
    • 고려인삼학회:학술대회논문집
    • /
    • 고려인삼학회 1974년도 학술대회지
    • /
    • pp.9-22
    • /
    • 1974
  • Unlike the tissue culture in animals and human being, in higher plants various parts of the plant are cultured for varied purposes, and they are named variously depending on which parts are used as explants or what purposes they are cultured for. Followings are some of the names of culture used frequently: organ culture, tissue culture, callus culture, single cell culture, meristem culture, mericlone culture, ovary culture, ovule culture, embryo culture, endosperm culture, anther culture, pollen culture, protoplast culture, etc.. As the names of the culture indicate, in some kinds of culture the explants used for culture are actually not tissues, but organs, single cells, or protoplasts. It seems, however, convenient to call all of the above-mentioned cultures grossly as tissue culture. Several kinds of tissue culture were attempted using Panax ginseng as material and some of the results were summarized below. 1. Callus culture After dormancy of the sed was broken, whole embryo or parts (hypocotyl, cotyledon and epicotyl) of partly grown embryo were cultured in the media supplemented with growth regulators. Rapid swelling occurred in a few weeks, but most of the swelling was observed only in the basal part of epicotyl, changes in the other parts of embryo appearing in much later stages. The swelling or increase in size, however, was resulted not from the divisions of cells, but from the mere expansion of cell. Real calli were formed about two months after inoculation of explants. Callus tissues developed from cortex, pith, and vascular bundle in the cases of hypo- and epicotyl, from mesophyl tissue in the case of cotyledon. Shoots developed more easily from cotyledons regardless of whether they are detached from or attached to the embryo proper. 2. Culture in the Knudson C medium When cotyledons, detached from or attached to the embryo proper, were cultured in the growth regulator-free Knudson C medium comprision only several kinds of mineral compounds and sucrose, shoot primordium or callus developed profusely and finally plantlets were produced directly from shoot primordium or indirectly through callus. In this medium epidermal cells as well as mesophyl cells of the cotyledon became meristematic and divided, changing into multinucleate cells or multicellular bodies, developing eventually into either shoot primordia or calli. 3. Anther culture Anthers were cultured in the media supplemented with various growth regulators applied singly or in combinations. Callus was formed mostly in the connective tissue of anther. Cells of anther wall layers changed in appearance, but no division occurred. Microspores of all stages in development were not changed, ruling out the possibility that microspore-originated callus might be formed. 4. Isolation of protoplast Protoplasts were isolated from young root, leaf, and epicotyl, using 0.7M D-mannitols as osmoticum and using macerozyme and cellulase respectively for maceration and digestion of the cell wall. Production in large number of naked intact protoplast was rather difficult as compared with other plant species. Fusion of protoplasts occurred infrequently mainly due to the fewer number of naked protoplasts in the solution.

  • PDF

GSIS의 자료기반 구축을 위한 SPOT 위성영상으로부터의 수치표고모형 생성 (A Generation of Digital Elevation Model for GSIS using SPOT Satellite Imagery)

  • 유복모;박홍기;정수;김원대
    • 대한공간정보학회지
    • /
    • 제1권1호
    • /
    • pp.141-152
    • /
    • 1993
  • 본 연구에서는 지형공간정보체계의 자료기반의 구축, 수치도면 제작 등 이용도가 확대되고 있는 수치표고모형을 수치위성영상자료를 이용하여 제작하고자 하였다. 위성영상의 공액 상좌표 취득에는 영상정합기법을 도입하였으며 취득된 지상좌표의 정확도를 분석하여 수치표고모형 제작의 연산법을 제시하였다. 위성영상의 외부표정요소는 광속조정법을 이용하여 결정하였고 좌우 수치영상상에서 동일점을 탐색하기 위한 영상정합방법으로는 표준상관기법을 적용하였다. 영상정합기법을 적용에 있어서는 기준영역의 크기를 결정하기 위해 기준영역의 크기를 다양하게 변화시켜 적절한 크기를 결정하고자 하였다. 영상정합의 정확도를 향상시키고 계산속도를 증가시키기 위하여 다양한 좌표변환식을 적용하고 이 결과를 통계학적으로 분석한 후 안전율을 고려하여 탐색영역을 결정하였다. 본 연구에서 제작된 수치표고모형의 정확도는 5000분의 1 지형도상에서 일정한 간격으로 추출하여 제작된 수치표고모형을 이용하였으며, 정확도를 평가한 결과 수치위성영상을 이용한 수치표고모형을 생성하는 연산법을 제시할 수 있었으며, 지형공간정보체계의 자료기반 구축에 필요한 대단위 지역에 대한 수치표고모형의 생성에 수치위성영상을 적용하는 효율적인 방법을 제시할 수 있었다.

  • PDF

Current and Future Trends of Accelerators and Antidegradants for the Tire Industry

  • Hong, Sung-W.
    • Elastomers and Composites
    • /
    • 제34권2호
    • /
    • pp.156-176
    • /
    • 1999
  • Rubber chemicals such as accelerators, antidegradants, vulcanizing agents, processing agents and retarders are very important to the production and protection of tires and rubber goods. The use of accelerators and antidegradants are evaluated in various tire components. This paper will focus on how to vulcanize tires economically and maintain the physical properties of each tire component without severe degradation due to oxygen, heat and ozone. Also, new non-nitrosoamine accelerators and non-staining antiozonants will be discussed. Lastly, the future requirements of antidegradants and accelerators in the tire industry will be reviewed. Tires have been vulcanized with Sulfenamides as primary accelerators and either Guamdine's or Thiurams as secondary accelerators to achieve proper properties at service conditions. However, interior components such as the carcass can be vulcanized with Thiazoles as a primary accelerator to cure faster than the external components. Using the combination of Sulfenamide with secondary accelerators in a tire tread compound and the combination of a Thiazole and Guanidine in a carcass compound will be presented with performance data. Uniroyal Chemical and another Rubber Chemical Manufacturer have developed, "Tetrabenzyl Thiuram Disulfide," (TBzTD) as a non-Nitrosoamine accelerator, which could replace Nitrosoamine generating Thiurams. This new accelerator has been evaluated in a tread compound as a secondary accelerator. Also, Flexsys has developed N-t-butyl-2-benzothiazole Sulfenamide (TBSI) as a non-Nitrosoamine accelerator which could replace 2-(Morpholinothio) -benzothiazole (MBS), a scorch delayed Sulfendamide accelerator. TBSI has been evaluated in a Natural Rubber (NR) belt skim compound vs. MBS. An optimum low rolling resistant cure system has been developed in a NR tread with Dithiomorpholine (DTDM). Also, future requirements for developing accelerators will be discussed such as the replacement of DTDM and other stable crosslink systems. Antidegradants are divided into two different types for use in tire compounds. Internal tire compounds such as apex, carcass, liner, wire breaker, cushion, base tread and bead compounds are protected by antioxidants against degradation from oxygen and heat due to mechanical shear. The external components such as sidewall, chafer and cap tread com-pounds are protected from ozone by antiozonants and waxes. Various kinds of staining and non-staining antioxidants have been evaluated in a tire carcass compound. Also, various para-phenylene diamine antiozonants have been evaluated in a tire sidewall compound to achieve the improved lifetime of the tire. New non-staining antiozonants such as 2, 4, 6-tris-(N-1, 4-dimethylpentyl-p-phenylene diamine) 1, 3, 5 Trizine (D-37) and un-saturated Acetal (AFS) will be discussed in the tire sidewall to achieve better appearance. The future requirements of antidegradants will be presented to improve tire performance such as durability, better appearance and longer lasting tires.

  • PDF

Bacillus amyloliquefaciens MJ-1 유래의 chitosanase 유전자의 클로닝 및 특성 (Molecular Cloning and Characterization of Chitosanase Gene from Bacillus amyloliquefaciene MJ-1)

  • 박찬수;오해근;홍순광;박병철;현영;강대경
    • 미생물학회지
    • /
    • 제42권2호
    • /
    • pp.142-148
    • /
    • 2006
  • 본 연구는 다양한 생리활성을 가지고 있는 chitosan oligosaccharides를 효소적 방법으로 생산하기 위한 기초 연구로서, 전통발효식품인 메주에서 chitosan 분해능이 우수한 균주를 분리하였다. 분리한 균주를 형태학적, 생화학적 및 분자생물학적 방법을 이용하여 동정한 결과, Bacillus amyloliquefaciene MJ-1으로 명명하였다. B. amyloliquefaciene MJ-1으로 부터 chitosanase 유전자를 포함하는 1,049 bp DNA 단편을 클로닝하였으며, chitosanase 유전자는 825 염기로서 274 개의 아미노산으로 구성되어 있었고, 예상 분자랸은 30.9 kDa이었다. 클로링한 chitosanase의 homology search 결과, glucoside hydrolase family 46에 속하는 chitosanase로 추정되었다. B. amyloliquefaciene MJ-1 chitosanase 유전자를 E. coli BLR (DE3)에 도입하였으며, 1 mM의 IPTG로 chitosanase 과잉 발현을 유도하고 정제한 후, pH및 온도에 대한 특성을 조사하였다. 효소 활성의 최적 온도는 $60^{\circ}C$이었으며, $80^{\circ}C$에서도 75%의 활성을 나타내었으므로 내열성을 가진 효소로 추정되었다. 한편, 최적 pH는 5.0 이었으며, pH $5{\sim}7$사이에서 80% 이상의 높은 활성을 유지하였다.