암반대수층의 수리적 특성은 지하수의 통로가 되는 지질구조에 의해서 크게 좌우된다. 본 연구에서는 수직 지질구조와 관련된 일차원 흐름의 이론들에 대해서 논하였다. 그리고, 경북 영일군 대송면 옥명리에서 행한 두 번의 양수시험(양수시험 1과 양수시험 2)에 대해서, 프락탈 모델을 적용하여 이 지역 수리 특성을 분석하였다. 양수시험분석에 의하면, 양수시험 1(양수정 : D9호공, 관측정 : C3호공과 D7호공)의 시험공 주변은 무한한 길이의 그리고 무한소의 폭을 가지는 수직 지질구조에 의해서 지배되는 일차원 흐름으로 대표되나, 양수시험2의 양수정(D10호공) 주변은 이차원에 가까운 흐름(1.9∼2차원)을 보인다. 이와 같이, 균열암반대수층의 특징은 공간적으로 또는 시간적으로 유동 차원이 달라지는 경우가 많다.
A miniaturized wideband band-pass filter with a 3-dB fractional bandwidth of 109.3% (1.53 GHz to 5.22 GHz), high out-of-band attenuation greater than 25 dB, and wide upper stopband up to 14 GHz is proposed. The design consists of a dual-composite right/left handed resonator, embedded open-circuited stub, and a pair of quarter-wavelength short-circuited stubs. These elements are coupled in the near distance to form a miniature filter with a compact occupied area of 0.21 λg×0.19 λg (≈ 0.013 cm2). The optimized filter has multitransmission poles in the passband, substantially improving the return loss and insertion loss characteristics. The behavior of the passband and stopband is verified against the results of a lumped element model and matrix analysis with a full-wave moment-based analysis and actual measurements. The results of this verification and a comparison with the performance of filters in other references indicate that the proposed filter is very efficient and applicable to compact microwave systems.
본 연구는 1970년대 이후 축산기술연구소 대관령지소에서 출생한 한우 암소로부터 한우암소의 성장곡선 모수에 영향하는 환경요인의 효과를 추정함으로써 한우의 개량을 위한 정보를 얻고자 실시하였다. Gompertz 모형, von Bertalanffy 모형 및 Logistic 모형에 의해 추정된 성장곡선 모수들의 분산분석 결과는 모두 같은 경향을 나타냈는데, 출생년도-계절의 효과는 성숙체중, 성장비 및 성숙률 모두에게 영향을 미치며, 어미소 연령의 효과는 성장비에서만 영향을 미쳤고, 공변이로 선형 모형에 포함된 최종 체중 측정시 일령의 효과는 성장비를 제외한 성숙체중과 성숙률에 영향을 미치는 것으로 나타났다. Gompertz 모형, von Bertalanffy 모형 및 Logistic 모형에 의해 개체별로 추정한 모수 A는 가을에 출생한 개체들이 봄에 출생한 개체들에 비해 10.47${\pm}$7.9, 19.01${\pm}$9.79 및 13.43${\pm}$5.94kg 더 무거웠으며 Logistic 모형에서 통계적 유의성(P〈.05)이 있었으며, 성숙률은 봄에 출생한 개체들이 가을에 출생한 개체들에 비해 0.00021${\pm}$0.00009, 0.00022${\pm}$0.00009 및 0.00041${\pm}$0.00013으로 높았고 통계적인 유의성(P〈.05)이 있었다. 어미소 연령 그룹별 성장모수들의 최소자승평균치를 보면 연령이 2세나 3세인 어미소로부터 태어난 암소들은 다른 연령그룹의 어미소로부터 태어난 암소들에 비해 성숙체중은 크지 않으면서 성장비가 크고 성숙률은 작은 경향을 보이고 있는데 성숙체중은 크지 않으면서 성장비가 크다는 것은 생시체중이 작다는 것을 시사한다. 따라서 한우 암소를 1산이나 2산까지만 번식에 이용한 후 비육 출하하는 생산체계를 유지하는 집단에서는 축군의 생시체중이 작아지고 성숙체중도 작아지는 현상이 나타날 우려가 있다. 본 연구에서는 성장곡선 모수에 영향을 미치는 환경요인으로서 출생년도-계절과 어미소 연령을 고정효과로 하고 여기에 최종 체중 측정시 일령의 1차식 효과를 공변이로 추가시켰는데, 분산분석 결과 최종 체중 측정시 일령이 세 가지 성장 모형으로 추정한 성숙체중과 성숙률에 영향을 미치는 것으로 나타났다. 이러한 결과들은 최종 체중 측정시 일령에 따라서 성장특성이 달라질 수 있음을 의미하므로 성장곡선 모형의 연구를 위해서는 최종 체중 측정 시점을 변이요인으로 고려하여야 한다. 그리고 한우의 성장 패턴을 좀더 잘 규명하기 위해서는 2차 이상의 다항회귀식 효과에 대한 검토가 필요하다.
In this paper, a three-dimensional hydrogen absorption model is developed to precisely study hydrogen absorption reaction and resultant heat and mass transport phenomena in metal hydride hydrogen storage vessels. The 3D model is first experimentally validated against the temperature evolution data available in the literature. In addition to model validation, the detailed simulation results shows that at the initial absorption stage, the vessel temperature and H/M ratio distributions are uniform throughout the entire vessel, indicating that the hydrogen absorption is so efficient during the early hydriding process and thus local cooling effect is not influential. On the other hand, nonuniform distributions are predicted at the latter absorption stage, which is mainly due to different degrees of cooling between the vessel wall and core regions. This numerical study provides the fundamental understanding of detailed heat and mass transfer phenomena during hydrogen absorption process and further indicates that efficient design of storage vessel and cooling system is critical to achieve fast hydrogen charging and high hydrogen storage efficiency.
Purpose - The objective of the present study is to examine the relationship between intellectual preferences of individuals and the level of readiness for change according to Ned Herman. Research design, data and methodology - For this, Iranian Supreme Audit Court was selected as a case study in this research and it was carried out to evaluate research variables and test hypotheses using standard questionnaires of intellectual preferences and readiness for change based on the methodology. It should be remarked that only 32 managers of Audit Court were willing to participate in this research and responded to the questionnaires. Results - The outputs of the performed tests showed that although there is not a significant relationship between the individuals with intellectual preferences for class A and readiness for change them, approaching the intellectual preferences of the individuals to D region increases the readiness for change them. On the other hand, whatever individuals have intellectual preferences for branches in groups B and C, the level of preparedness for change is low. Conclusions - The results of this research have made a clear policy for the effective utilization in human resources based on their intellectual preferences model for management with organizational changes.
본 연구에서는 딸기의 수확단계에서의 생물학적 위해요소를 조사하고 그 결과를 딸기 GAP 모델의 개발을 위한 기초자료로 제공하기 위해 수행하였다. 경남 서부에 소재한 딸기 농장 6곳(토경재배 3곳, 양액재배 3곳)에서 총 216점의 시료를 수집하여 위생지표세균, 병원성 미생물, 그리고 곰팡이에 대해 분석하였다. 일반세균과 대장균군의 경우 토경재배 농장에서는 각각 1.0-6.9와 0.4-4.6 log CFU/g(leaf, mL, hand or 100 $cm^2$) 수준으로, 양액 재배 농장에서는 각각 0.8-4.9 log와 0.2-2.6 log CFU/g(leaf, mL, hand or 100 $cm^2$)수준으로 검출되었고 대장균은 모든 시료에서 검출되지 않았다. 병원성미생물은 S. aureus가 작업자의 손에서 최대 3.3 log CFU/hand 수준으로 검출되었고, B. cereus가 토양과 작물, 개인위생에서 0.4-4.1 log CFU/g(hand or 100 $cm^2$) 범위로 검출되었으며, L. monocytogenes, E. coli O157:H7 및 Salmonella spp.는 검출되지 않았다. 곰팡이는 토경재배 농장과 양액재배 농장 각각 1.0-5.2와 0.2-4.4 log CFU/g(leaf, mL, hand or 100 $cm^2$) 수준으로 검출되었다.
설계도면을 중심으로 산출되는 물량정보는 건설 프로젝트 생애주기 동안에 프로젝트 참여주체들에게 비용과 관련한 의사결정에 결정적인 역할을 하는 매우 중요한 정보이다. 이러한 정보를 생성하는 물량산출 업무가 수작업에 많이 의존하다보니 작업자의 실수에 의한 오류가 빈번하게 발생하고, 견적담당자의 노하우에 따라 물량의 차이가 존재하기도 한다. 또한, 설계변경에 의해서 물량산출을 위한 재작업에 들어가게 될 경우 모든 물량산출 프로세스를 다시 거쳐야 하는 문제가 있다. 이러한 제반 문제는 견적자동화를 통해 물량산출의 정확성 확보 및 설계변경 시 요구되는 물량산출의 대응력에 대한 요구를 증대시키고 있으며, 최근 3D CAD Modeler에서 생성된 3D CAD 모델을 기반으로 견적업무프로세스를 자동화하려는 연구가 다양한 관점에서 시도되고 있다. 그러나 기존 연구에서는 특정 3D CAD Modeler를 중심으로 한 견적자동화에 대한 연구로 다양한 3D CAD Modeler에서 생성된 3D CAD 모델로부터 물량정보를 취득하기 위한 공통체계 구축하고 이를 기반으로 BIM기반 견적자동화를 이루는 데 한계를 가지고 있다. 따라서 본 연구에서는 이러한 BIM기반 견적자동화 체계구축을 위한 기반 연구로 다양한 3D CAD Modeler로부터 물량산출을 자동화하기 위해 Modeler가 내부적으로 가지고 있는 Quantity Data Type을 추출하고, 이를 분석 및 검증할 수 있는 체계를 개발하였다.
Hassan, M.S.;Salawdeh, S.;Hunt, A.;Broderick, B.M.;Goggins, J.
Advances in Computational Design
/
제3권3호
/
pp.233-267
/
2018
Conventional seismic design of concentrically braced frame (CBF) structures suggests that the gusset plate connecting a steel brace to beams and/or columns should be designed as non-dissipative in earthquakes, while the steel brace members should be designed as dissipative elements. These design intentions lead to thicker and larger gusset plates in design on one hand and a potentially under-rated contribution of gusset plates in design, on the other hand. In contrast, research has shown that compact and thinner gusset plates designed in accordance with the elliptical clearance method rather than the conventional standard linear clearance method can enhance system ductility and energy dissipation capacity in concentrically braced steel frames. In order to assess the two design methods, six cyclic push-over tests on full scale models of concentric braced steel frame structures were conducted. Furthermore, a 3D finite element (FE) shell model, incorporating state-of-the-art tools and techniques in numerical simulation, was developed that successfully replicates the response of gusset plate and bracing members under fully reversed cyclic axial loading. Direct measurements from strain gauges applied to the physical models were used primarily to validate FE models, while comparisons of hysteresis load-displacement loops from physical and numerical models were used to highlight the overall performance of the FE models. The study shows the two design methods attain structural response as per the design intentions; however, the elliptical clearance method has a superiority over the standard linear method as a fact of improving detailing of the gusset plates, enhancing resisting capacity and improving deformability of a CBF structure. Considerations were proposed for improvement of guidelines for detailing gusset plates and bracing members in CBF structures.
In order to know the characteristics of attenuation of coda wave in the Kyungsang Sedimetary Basin, quality faclity factor for coda wave (coda Q) is estimated from the earthquake data recorded in the KIGAM local seismic network. Thesingle scattering model for coda wave generation is adopted is adopted in estimating coda Q. In the present study, coda Q(Qc)is estimated in the range of $\alpha$=1.5~3.0, where $\alpha$ denotes the normalized time to S-wave travel time and expressed in terms of frequency (f). The deduced function in the range of 1 to 25 Hz is Qc=36.8283$f^{1.15095}$ which represents the strong dependence of coda Q on frequency. It is found that the difference of Qc between U-D, N-S, and E-W components is negligible. This fact suports the back scattering therory that coda wave originates from scattered waves by randomly distributed heterogenities in the crust On the other hand, it is observed that the coda Q increases with increasing epicentral distence. This observation suggests that QC increases with depth.
In this paper a new design of multi-layer perceptron(MLP) for camera calibration is proposed. Most existing techniques determine a transformation from 3D spatial points to their image points and camera parameters are tried to be estimated from the transformation. The technique proposed here, on the other hand, determines rays of sight uniquely from image points and parameters are estimated from the relationship using an MLP. By this approach projection and back-projection can be done more straightforwardly. Being based on a geometric model, a network design process becomes less ambiguous, which is a clear merit compared to other neural net based techniques. An MLP designed according to the technique proposed showed fast and stable learning in tests under various conditions.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.