• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.605-610
• /
• 2000

The concrete slab on the foundation may have curling and warping deformations due to temperature gradient of its section. These deformations may change the support conditions of concrete slabs, and cause higher level of stresses tan expected. In this study, partial support conditions de to several temperature gradients are evaluated using FE analysis. Expecially, 3D FE model is adopted to evaluate the partial contact between the slab and the base which is hard to be simulated in 2D FE models. The discrepancies of analysis results increase at high temperature gradients. And it is concluded that 3D FE model can be used to simulate real support and temperature conditions.

• 한국정밀공학회지
• /
• 제17권7호
• /
• pp.74-79
• /
• 2000

Integrating a 3D solid modeler with a general purpose FEM code, an automatic nonlinear analysis system of the 3D crack problems has been developed. A geometry model, i.e. a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model by using the fuzzy knowledge processing. Nodes are generated by the bucketing method, and ten-noded quadratic tetrahedral solid elements are generated by the Delaunay triangulation techniques. The complete finite element(FE) model generated, and a stress analysis is performed. In this system, burden to analysts fur introducing 3D cracks to the FE model as well as fur estimating their fracture mechanics parameters can be dramatically reduced. This paper describes the methodologies to realize such functions, and demonstrates the validity of the present system.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.130-133
• /
• 2005

Efficient finite element method has been introduced for metallic sandwich plates subject to 3-point bending. A full model 3-point bending FE-analysis shows that plastic behavior of inner structures appears only at the load point. So, Unit structures of sandwich plates are defined to numerically calculate the bending stiffness with recurrent boundary condition of pure bending. And then equivalent models with same bending stiffness and strength of full models are designed analytically. It is demonstrated that results of both models are almost same and FE analysis method with equivalent models can reduce analysis time effectively.

• 한국결정성장학회지
• /
• 제7권2호
• /
• pp.244-252
• /
• 1997

$LiCO_3, Al_2O_3, Fe_2O_3$ 혼합물을 1620K에서 반응시켜 리튬전지의 음극재료로 응용이 가능한 스핀넬형 $LiAl_{2.5}/Fe_{2.5}O_8$를 합성하였다. XRD의 Rietveld 해석을 통하여 결정구조 해석을 하였다. 고용체의 공간군은 $P4_3$32(a=8.1293$\AA$)이고, 결정구조해석의 최종 Residual index는 약 5%정도이었다. 역 스핀넬구조에서 양이온 $Al^{3+}, Fe^{3+}$은 4-배위와 6-배위로 위치하고, $Li^+$은 4b, 12d의 6-배위자리에 존재하였다.

• 대한기계학회논문집A
• /
• 제32권8호
• /
• pp.642-653
• /
• 2008

In this paper, we propose a 3-D finite element (FE) analysis model with combined physical behavior and kinematical impact factors for evaluation of residual stress in multi-impact shot peening. The FE model considers both physical behavior of material and characteristics of kinematical impact. The physical parameters include elastic-plastic FE modeling of shot ball, material damping coefficient, dynamic friction coefficient. The kinematical parameters include impact velocity and diameter of shot ball. Multi-impact FE model consists of 3-D symmetry-cell. We can describe a certain repeated area of peened specimen under equibiaxial residual stress by the cell. With the cell model, we investigate the FE peening coverage, dependency on the impact sequence, effect of repeated cycle. The proposed FE model provides converged and unique solution of surface stress, maximum compressive residual stress and deformation depth at four impact positions. Further, in contrast to the rigid and elastic shots, plastically deformable shot produces residual stresses closer to experimental solutions by X-ray diffraction. Consequently, it is confirmed that the FE model with peening factors and plastic shot is valid for multi-shot peening analyses.

• 한국주조공학회지
• /
• 제30권3호
• /
• pp.100-110
• /
• 2010

The solidification sequence and formation of intermetallic phase of Fe-rich Al-Si-Cu alloy were investigated by using real-time imaging of synchrotron X-ray radiation. Effects of cooling rate during uni-directional solidification on the resultant solidification behavior was also studied in a specially constructed vacuum chamber in the SPring-8 facility. The series of radiographic images were complementarily analyzed with conventional analysis of OM and SEM/EDX for phase identification. Detailed solidification sequence and formation mechanisms of various phases were discussed based on real-time image analysis. The growth rates of $\alpha$-AlFeMnSi and ${\beta}-Al_5FeSi$ were measured in order to understand the growth behavior of each phase. It is suggested that real-time imaging technique can be a powerful tool for the precise understanding of solidification behavior of various industrial materials.

• 박물관보존과학
• /
• 제23권
• /
• pp.71-90
• /
• 2020

전쟁기념관에서 소장하고 있는 등록문화재 제666호 F-51D 무스탕 전투기의 과학적 분석을 진행하였다. F-51D 무스탕 전투기는 1950년 6월 25일 전쟁이 발발하자, 7월 2일 우리 공군이 미국으로부터 인수해 최초로 운용한 전투기이다. 전쟁기간 동안 북한군을 상대하여 괄목할 만한 작전을 펼친 한국 공군의 주력기이다. 본 연구 대상은 6·25전쟁 당시 직접 사용된 기체로 현재까지 과학적 조사·분석이 이루어지지 않았으며 차후 해체 및 복원을 계획하고 있다. 지속적인 옥외 전시로 인해 도료층 및 캐노피가 변색되었으며 도료의 박락 및 균열 또한 확인되었다. 비파괴 과학적 분석을 통해 대형유물의 해체 및 복원의 기초 자료로 활용하고자 한다. P-XRF를 사용하여 적색, 청색, 황색, 백색, 흑색, 회색을 중심으로 안료 성분 분석을 진행하였고, 전투기에 사용된 도료의 수지 성분을 확인하기 위해 적외선 분광 분석(FT-IR-ATR)을 하였다. 몸체, 날개, 꼬리날개에 사용된 금속의 성분 분석도 함께 진행하였다. 안료 성분 분석은 적색 산화철인 벵가(Fe₂O₃), 프탈로시아닌 블루계 등의 유기안료, 황색의 황연(PbCrO₄), 백색의 티타늄화이트(TiO₂), 흑색의 철흑(Fe₃O₄), 회색의 철흑(Fe₃O₄)+티타늄화이트(TiO₂)가 확인되었다. 전투기 외부 도장에 사용된 수지는 주로 Alkyd 수지를 사용한 것으로 확인되었으며 청색의 경우 Acryl 수지를 이용하여 도장 한 것으로 추정된다. 전투기 캐노피는 투명성과 내광성이 우수한 Poly methyl methacrylate(PMMA)로 확인되었다. 전투기 몸체, 날개, 꼬리날개에서 모두 알루미늄(Al)이 주성분으로 검출되었다. 꼬리날개부 후면부의 경우 철-아연 도금(함석)이 사용된 것을 보아 과거 복원부인 것으로 판단되었다.

• Structural Monitoring and Maintenance
• /
• 제10권4호
• /
• pp.339-360
• /
• 2023

In this paper, to assess the performance of a multi-span simply supported RC bridge, the dynamic characteristics of the bridge were measured and determined by structural health monitoring and resilient assessment via operational modal analysis as well as FE modeling. Supporting finite element (FE) models were created and analyzed according to the design drawings. This study used 2D plane monitoring of locations of hole in the infill wall and used 3D health monitoring and resilient assessment. From the results of 3Dsymmetric frame, if the frame is unsymmetrical, the used model can lead to the reduction in the internal forces. The recommendations from this study is from some discrepancies observed between 2D and 3D models, if possible 3D model should be used in analyzing the real frames.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권2호
• /
• pp.85-92
• /
• 2000

30 kVA rotating-field type Super-Conducting Generator is built and tested with intensive FE(Finite Element) analysis. The generator is driven by VVVF inverter-fed induction motor. Open Circuit Characteristic(OCC) and Short Circuit Characteristic(SCC) are presented in this paper. Also, the test result under the light load(up to 3.6 kW) are given. From the design stage, 2-D FE analysis coupled with the external circuit has been performed. The external circuit includes the end winding resistance and reactance as well as two dampers. When compared with the test data, the FE analysis results show a very good agreement.

• 암석학회지
• /
• 제2권2호
• /
• pp.63-73
• /
• 1993

The assemblage epidote and grandite garnet occurs in low-to medium-grade metabasites and calc schists of various geotectonic settings and in hydrothermally altered calcareous rocks in skarn deposits. The compositions of sixteen epidote-garnet paris have been analysed by means of electron microprobe. Al-Fe partitioning between coexisting grandite garnet and epidote is considered and measured at the grain boundaries on the supposition that the surface equilibrium was maintained in the following exchange reaction: 2$Ca_2Al_3Si_3O_12$(OH)+$Ca_3Fe_2Si_3O_12$=2$Ca_2A_l2FeSi_3O_12$(OH)+$Ca_3Al_2Si_3O_12$ Partition coefficients confirms the differences in thermal conditions between low-grade and medium-grade metamorphic rocks. $K_D$ values ($X_{$CO_2$}$=($Fe^{+3}$/Al)$^{Ep}$/($Fe^{+3}$/Al)$^{Gr}$, where Fe=$Fe^{+3}$) from greenschist facies rocks of the estimated metamorphic temperatures, 330~$390^{\circ}C$, range approximately between 0.02 and 0.17. Epidote-amphibolite facies rocks and calcareous skarns of the estimated temperatures, 400~$550^{\circ}C$, have $K_D$ values between 0.24 and 0.37. $K_D$ values from the rocks of the temperatures, 640~$700^{\circ}C$, range nearly between 0.58 and 0.75. The diagrams in Figs. 2 and 3 can serve as a mineralogic thermometer for relatively shallow rocks, assuming that the pressure dependence of partition coefficients for the iron-exchange reaction in the two minerals can be neglected.