• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.7
• /
• pp.1111-1125
• /
• 2010

Study is a basic analysis of a future virtual clothing system based on a comparative analysis of all the shirring, using a 3-dimensional apparel cad system. Frilled skirts shirred at the lower hemline were the subject of this study for a comparison of expression and shape of shirring. It compared the silhouette and details expressed in virtual and real skirts made of woolen fabrics and polyester satin, with different widths (1.5, 2 and 2.5 widths). It was found that the virtual skirt could not express shirring as exquisitely as the real skirt due to fabric thickness and other fabric characteristics. In addition, the increase in widths caused the frill shape to deform badly. In the case of a virtual skirt made of polyester satin, the increased multiplication factor let the frill spread out sharply (unlike the real skirt). Simulated skirts of polyester satin and woolen spread out to the sides with the sidelines of their frills hanging down markedly (unlike the real cloths) when the frills changed from 1.5 widths to 2 widths. When it came to the virtual skirt, side-line from the hip down all the way short of frill contorted with the wrinkle multiplication factor of 2 and 2.5 widths. This phenomenon was more notable in polyester satin skirts than in woolen skirts.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.2
• /
• pp.87-93
• /
• 2002

Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts have been very important technique in scientific study and engineering, especially for system design, manufacturing and inspection. Two-camera method keeps accuracy more than double than mechanical method. In this paper, a new method is studied to acquire 3D geometric data of the small object such as a die in stone model. When the devices, cameras, laser beam and object are in a perfect plane, the calculation is measured by position error 0.025[mm] within. But this paper shows that arbitrarily positioned system can also be used to obtain 3D data. Also, this paper present a method to generate coping surface data with which CAM system can do for milling work.

• Journal of information and communication convergence engineering
• /
• v.17 no.4
• /
• pp.255-260
• /
• 2019

A pendubot is a representative example of an underactuated system that has fewer actuators than the degree of freedom of the system. In this study, the characteristics of the pendubot are first reviewed; each part is then designed using Solidworks by dividing the pendubot into three parts: the base frame, first link frame, and second link frame. These three parts are then imported into the Simulink environment via a STEP file format, which is the standard protocol used in data exchange between CAD applications. A 3D model of the pendubot is then constructed using Simscape, and the usefulness of the 3D model is validated by a comparison with a dynamic equation derived using the Lagrangian formulation. A linearized model around an upright equilibrium position is finally obtained, and a sliding mode controller is designed based on the linear quadratic regulator. Simulation results showed that the designed controller effectively maintained upright balance of the pendubot in the presence of disturbance.

• Journal of Technologic Dentistry
• /
• v.40 no.3
• /
• pp.115-123
• /
• 2018

Purpose: The purpose of this study was establishing process of manufacturing dental prosthesis by using eZIS system(DDS Inc.,Korea). Methods: To evaluate accuracy verification, the test was practiced two ways. First, Comparison of 3D printing models and stone models was practiced by using 3D superimposing software. #36 prepared master model was scanned by eZIS system and three 'Veltz3D' 3D printing models and three 'Bio3D' 3D printing models were manufactured. three stone models were manufactured by conventional impression technique. Second, Fitness test was practiced. the 3D printing models and the stone models was compared by manufacturing same resin crown. #36 prepared master model was scanned 9 times and manufactured (milled) 9 resin crowns by eZIS system. These crowns were cemented three 'Veltz3D' 3D printing models, three 'Bio3D' 3D printing models and three stone models. These crowns were sliced mesiodistal axis and gaps were measured by digital microscope. Results: The average accuracy of Bio3D models were 65.75%. Veltz3D(Hebsiba) models were 60.11% Stone models were 41.00%. Conclusion : This study results showed 3D printing model is similar with stone model. So it was under clinical allow, didn't affect final dental prothesis. There were no significant differences in the appearance of the three types of milling crowns.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.301-306
• /
• 2007

Design of civil infrastructures is generally based on 2-D drawings and analyses. Design provisions also specify the limit states using member based equations. Most construction projects are done through collaboration of engineers who have different specialized knowledge. Information technologies can dramatically enhance the performance of the collaboration. For the information transfer, we need a mediator between engineers. Object based 3-D models are useful for the communication and for the owners who have to maintain whole the information of infrastructures. In this paper, basic guidelines for the 3-D design according to design phases. Adequate interoperability of 3-D objects from any CAD system is essential for the collaboration. Owners, contractors and design consultants were considered as users of 3-D objects. Cost and performance of each design phases was investigated through the existing data.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.175-176
• /
• 2008

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1991.10a
• /
• pp.69-72
• /
• 1991

This paper proposes an efficient algorithm that constructs 3 dimensional solid object from orthographic views. The 3D object construction algorithm inputs vertices and edges information of 3 orthogonal views, generates 2 dimensional surfaces of input views, 3 dimensional possible vertices, possible edges and possible surfaces, compares 2 dimensional projections of 3 dimensional possible surface with two dimensional surfaces from orthogonal views and then determines the solution. This algorithm has been proved to be efficient in reducing the time taken and is useful for CAD system, 3 dimensional scene analysis system and object modellings for 3D graphics. The algorithm has been implemented in C language on the IBM PC/AT.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.30-30
• /
• 2000

당사는 각종 진공 장비를 개발/제작한 경험을 바탕으로 25년 동안 진공 산업 발전에 기여하여 왔으며 자체 기술로 HIGH VACUUM 응용시스템 설계 및 제작하고 있다. 이와 함께 3D CAD를 이용한 consulting 및 Modeling 분석을 수행하여, 자체 기술로 설계 및 제작 판매하고 있다. Vacuum System은 In-line System (ITO, SiO2, Cr Tio2, Ag, Al 등), Roll to Roll(Web) Sputtering system (ITO, SiO2, Ar, Metal 등), 유기 EL 박막 진공 증착 장치, PECVD System, Evaporator 시스템 등을 제작 공급하고 있다. 현재 Roll to Roll(Web) Sputtering System은 Dual Cathode를 사용하는 방식으로 개발중에 있으며, 평판 디스플레이용 대면적 Glass를 위한 In-line Sputtering System을 같이 개발하고 있다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11b
• /
• pp.605-608
• /
• 2003

신발의 디자인과 설계는 기술의 부족으로 과거 수십년 동안 3차원 실물을 대상으로 직접 이루어지지 못했다. 불과 몇년 전까지만 해도 신발 설계는 신발모형을 본뜬 근사적인 2차원 Last상에서 숙련된 전문 신발 디자이너의 손에 의해서만 가능한 일이었으나 최근에는 컴퓨터 S/W와 그래픽스 기술의 빠른 성장에 힘입어 3차원 Last를 대상으로 직접 신발을 설계하는 기술들이 개발되어 보다 효율적인 신발 설계가 가능하게 되었다. 그러나 아직 국내에서는 이러한 기술에 대한 연구, 개발은 미미한 수준이다. 본 논문에서는 3차원 Last를 2차원 평면으로 펼쳐서 양 차원간의 기하정보를 적절하게 Mapping 시키고 3차원 Last상에 직접 스타일 라인을 생성, 설계한 다음 이를 인터렉티브하게 2차원 패턴으로 생성해내는 3차원 신발 캐드 시스템을 구현 하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.405-408
• /
• 2004

The sheet parts are formed with dies conventionally. But this conventional forming process is not suited to small volume and varied production for the reason of high cost. For the solution of this problem, a new forming process, which is called CNC incremental sheet forming, is being introduced. This process can form sheet parts without die, and is very well suited to small volume and varied production in space flight and automobile. In this paper, dieless CNC forming system based on a machining center is developed. A special device to grasp and pull the blank sheet built in the machining center and tool path generation S/W from STL file of 3-D model are developed. Several sheet parts are incrementally formed to verify the effectiveness of the developed system.