• Journal of Power System Engineering
• /
• v.8 no.3
• /
• pp.30-35
• /
• 2004

In the steel making industries, the continuous casting process has been applied to the number of company because of its economical benefit. Casting rolls are utilized for frictional drive and transport of solidifying slap. Dimensional tolerances, mechanical stability and surface condition of the cast roll can affect both the surface and internal quality of the product being cast. To overcome these problems, the industry is accelerating on the rate of technology improvements. Samples were overlaid on the S45C steel by submerged arc welding process. And the hardness, wear, electrochemical corrosion and oxidation tests were carried out. Test results were that all these materials were satisfying basic requirements of caster rolls. By these results, the addition of 0.1%Nb and 0.15%V increase mechanical properties and tempering resistance by its superior carbide forming characteristics in low carbon $12{\sim}13%Cr$ martensitic stainless steels.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.5
• /
• pp.36-42
• /
• 2003

A CFD simulation technique has been developed to handle the unsteady body motion with large amplitude by use of overlapping multi-block grid system. The three-dimensional, viscous and incompressible flow around body is investigated by solving the Navier-Stokes equations, and the motion of body is represented by moving effect of the grid system. Composite grid system is employed in order to deal with both the body motion with large amplitude and the condition of numerical wave maker in convenience at the same time. The governing equations, Navier-Stokes (N-S) and continuity equations, are discretized by a finite volume method, in the framework of an O-H type boundary-fitted grid system (inner grid system including test model) and a rectangular grid system (outer grid system including simulation equipments for generation of wave environments). If this study, several flow configurations, such as an oscillating cylinder with large KC number, are studied in order to predict and evaluate the hydrodynamic forces. Furthermore, the motion simulation of a Series 60 model advancing in a uniform flow under the condition of enforced roll motion of angle 20$^{\circ}$ is performed in the developed numerical wave tank.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.85-93
• /
• 2016

PURPOSE. The purpose of this study was to determine the effect of anchorage systems and palatal coverage of denture base on load transfer in maxillary implant-retained overdenture. MATERIALS AND METHODS. Maxillary implant-retained overdentures with 4 implants placed in the anterior region of edentulous maxilla were converted into a 3-D numerical model, and stress distribution patterns in implant supporting bone in the case of unilateral vertical loading on maxillary right first molar were compared with each other depending on various types of anchorage system and palatal coverage extent of denture base using three-dimensional finite element analysis. RESULTS. In all experimental models, the highest stress was concentrated on the most distal implant and implant supporting bone on loaded side. The stress at the most distal implant-supporting bone was concentrated on the cortical bone. In all anchorage system without palatal coverage of denture base, higher stresses were concentrated on the most distal implant and implant supporting bone on loaded side. CONCLUSION. It could be suggested that when making maxillary implant retained overdenture, using Hader bar instead of milled bar and full palatal coverage rather than partial palatal coverage are more beneficial in distributing the stress that is applied on implant supporting bone.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.4
• /
• pp.317-328
• /
• 2006

Purpose: This study was performed to measure the accuracy of adjustable dental impression trays by a scanning laser three-dimensional digitizer. Materials and Methods: Metal stock tray and adjustable stock trays were used for 40 stone casts(10 casts each) duplicated a resin master model of mandible and maxilla. The type IV dental stone was poured in a allginate impressions and allowed to set for one hour. The casts were digitized using an optical digitizer. The distance between the reference points were measured and analyzed on the graphic image of 3-D graphic software (CATIA version 5.0). The statistical significance of the differences between the groups was determined by a two-way ANOVA. Results: There were no significant differences between the accuracies of the adjustable stock tray and the master model except anterior arch width of the upper arch and the diagonal arch length and arch length(one side) of the lower arch. Conclusion: The adjustable stock trays showed clinically acceptable accuracies of the study casts produced by them.

• Phonetics and Speech Sciences
• /
• v.1 no.4
• /
• pp.47-59
• /
• 2009

The purpose of this paper is to propose an automatic evaluation technique for the prosodic aspect of an English sentence uttered by Korean speakers learning English. The underlying hypothesis is that the consistency of the manual prosody scoring is reflected in an imaginary space of prosody evaluation model constructed out of the three physical properties of the prosody considered in this paper, namely: the fundamental frequency (F0) contour, the intensity contour, and the segmental durations. The evaluation proceeds first by building a prosody evaluation model for the sentence. For the creation of the model, utterances from native speakers of English and Korean learners for the target sentence are manually scored by either native teachers of English or Korean phoneticians in terms of their prosody. Multiple native utterances from the manual scoring are selected as the "model" native utterances against which all the other Korean learners' utterances as well as the model utterances themselves can be semi-automatically evaluated by comparison in terms of the three prosodic aspects [7]. Each learner utterance, when compared to the multiple model native utterances, produces multiple coordinates in a three-dimensional space of prosody evaluation, each axis of which corresponds to the three prosodic aspects. The 3D coordinates from all the comparisons form a prosody evaluation model for the particular sentence and the associated manual scores can display regions of particular scores. The model can then be used as a predictive model against which other Korean utterances of the target sentence can be evaluated. The model from a Korean phonetician appears to support the hypothesis.

• Journal of Hydrogen and New Energy
• /
• v.21 no.4
• /
• pp.249-257
• /
• 2010

In this paper, a three-dimensional hydrogen absorption model is developed to precisely study hydrogen absorption reaction and resultant heat and mass transport phenomena in metal hydride hydrogen storage vessels. The 3D model is first experimentally validated against the temperature evolution data available in the literature. In addition to model validation, the detailed simulation results shows that at the initial absorption stage, the vessel temperature and H/M ratio distributions are uniform throughout the entire vessel, indicating that the hydrogen absorption is so efficient during the early hydriding process and thus local cooling effect is not influential. On the other hand, nonuniform distributions are predicted at the latter absorption stage, which is mainly due to different degrees of cooling between the vessel wall and core regions. This numerical study provides the fundamental understanding of detailed heat and mass transfer phenomena during hydrogen absorption process and further indicates that efficient design of storage vessel and cooling system is critical to achieve fast hydrogen charging and high hydrogen storage efficiency.

• Journal of computational fluids engineering
• /
• v.13 no.1
• /
• pp.21-27
• /
• 2008

A numerical study for laminar flow in the entrance region of helical tubes for uniform inlet velocity conditions is carried out by means of the finite volume method to investigate the effects of Reynolds number, pitch and curvature ratio on the flow development. This results cover a curvature ratio range of 1/10$\sim$1/320, a pitch range of 0.0$\sim$3.2, and a Reynolds number range of 125$\sim$2000. It has been found that the curvature ratio does significantly effect on the angle of flow development, but the pitch and Reynolds number do not. The characteristic angle $\phi_c(=\phi/\sqrt{\delta})$, or the non-dimensional length $\overline{l}(=l\sqrt{\delta}cos(atan\lambda)/d)$ can be used to represent the flow development for uniform inlet velocity conditions. In uniform inlet velocity conditions, the growth of boundary layer delays the flow development attributed to centrifugal force, and in which conditions the amplitude of flow oscillations is smaller than that in parabolic inlet velocity conditions. If the pitch increases or if the curvature ratio or Reynolds number decreases, the minimum friction factor and the fully developed average friction factor normalized with the friction factor of a straight tube and the flow oscillations decrease.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.698-706
• /
• 2000

It is very difficult to mechanize tomato harvesting because identifying a tomato partly covered with leaves and stalks is not easy. This research was conducted to develop tomato harvesting robot which can identify a target tomato, determine its three dimensional position, and harvest it in a limited time. Followings were major findings in this study. The first visual system of the harvesting robot was composed of two CCD cameras, however, this could not detect tomatoes which are not seen on the view finder of the camera especially those partly covered by leaves or stalks. The second visual device, combined with two CCD cameras and pan/tilt procedures was designed to minimize the positioning errors within ${\pm}10mm$, but this is still not enough to detect tomatoes partly covered with leaves etc. Finally, laser distance detector was added to the visual system that could reduce the position detecting errors within 10mm in X-Y direction and 5mm in Z direction for the partly covered tomatoes.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2005.09a
• /
• pp.173-182
• /
• 2005

A three dimensional (3D) model for the catalytic region of Type II Pseudomonas sp. USM 4-55 PHA synthase 1 (PhaC1$_{P.sp\;USM\;4-55}$) from residue 267 to residue 484 was developed. Sequence analysis demonstrated that PhaC1$_{P.sp\;USM\;4-55}$ lacked homology with all known structural databases. PSI-BLAST and HMM Superfamily analyses demonstrated that this enzyme belongs to the ${\alpha}/{\beta}$ hydrolase fold family. Threading approach revealed that the most suitable template to use was the Human gastric lipase (1HLG). The superimposition of the predicted PhaC1$_{P.sp\;USM\;4-55}$ model with the 1HLG template structure covering 86.2% of the backbone atoms showed an RMSD of 1.15 ${\AA}$ The catalytic residues comprising of Cys296, Asp451, His452 and His479 were found to be conserved and were located adjacent to each other. We proposed that the catalytic mechanism involved the formation of two tetrahedral intermediates.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.956-959
• /
• 2005

The overall goal of this thesis is to develop a new algorithm based on the octree model for geometric and mechanistic milling operation at the same time. Most commercial machining simulators are based on the Z map model, which has several limitations in terms of achieving a high level of precision in five-axis machining simulation. Octree representation being a three-dimensional (3D) decomposition method, an octree-based algorithm is expected to be able to overcome such limitations. With the octree model, storage requirement is reduced. Moreover, recursive subdivision is processed in the boundaries, which reduces useless computations. To achieve a high level of accuracy, fast computation time and less memory consumption, the advanced octree model is suggested. By adopting the supersampling technique of computer graphics, the accuracy can be significantly improved at approximately equal computation time. The proposed algorithm can verify the NC machining process and estimate the material removal volume at the same time.