• 태양에너지
• /
• 제20권4호
• /
• pp.25-30
• /
• 2000

The present study has been conducted to offer an geometrically optimal structure of a storage tank for a regenerator. In this paper, three kinds of baffle plates supposed to increase the regeneration rate and classified as "Type A($L^*$=0.25, 80(L)$\times$300(W)$\times$50 (H) [mm])", "Type B($L^*$=0.5, 150(L)$\times$300(W)$\times$50 (H) [mm])", and "Type C($L^*$=0.75, 230(L)$\times$300(W)$\times$50(H) [mm])" were suggested and tested. They were placed between the vertical C-C layers in the tank. Solution temperature and concentration were used to evaluate the regeneration rate. As a result, the regeneration rate was better in "Type C".

• Biomolecules & Therapeutics
• /
• 제4권4호
• /
• pp.419-427
• /
• 1996

To solubilize practically insoluble biphenyl dimethyl dicarboxylate (DDB), which has been used for the treatment of chronic hepatitis as tablets or hard capsules, the solubilities of DDB in various hydrophilic, oily and hydrocarbon vehicles, and aqueous surfactant solutions were measured by high performance liquid chromatography. It was found that, among the vehicles studied, polyethylene glycol (PEG) 300 revealed the best solvency, and the solubility reached 17.6 mg/ml at 37$^{\circ}C$. The addition of glycyrrhizic acid ammonium salt (GAA) to DDB-PEG 300 solution (5-20 mg/g) inhibited the formation of precipitates, and at the concentration of 10 mg/g, any precipitaction was not observed even after 2 years at 4$^{\circ}C$. Furthermore, GAA markedly enhanced the permeation of DDB through the rabbit duodenal mucosa in a concentration dependent manner. The addition of copolyvidone (ca. 1.0%) to DDB-GAA-PEG 300 system (1 : 0.5 97.5 w/w) was most effective in preventing the considerable precipitation of DDB-PEG 300 solution (7.5 mg/750 mg) when mixed with water of 300-900 ml at 37$^{\circ}C$. GAA showed a synergistic effect in the prevention of precipitate formation. This finding suggests that this DDB formulation may form less precipitation when DDB soft capsules disintegrate and diffuse into the gastrointestinal fluid, resulting in improving the bioavailability Dissolution rate of DDB (7.5 mg) from sort elastic capsules of DDB-GAA-PEG 300 system was rapid. The supersaturation state was maintained for 2 hr at the concentration of 7.35$\pm$3.3 mg in 900 ml of water without precipitation. The total amount of DDB dissolved from this new formulation was 5.3 and 6.1 times higher, when compared to marketed DDB tablets (25 mg) and capsules (7.5 mg), respectively.

• 전기학회논문지
• /
• 제56권4호
• /
• pp.751-755
• /
• 2007

We have studied the variable conditions of reactive sputtering to prepare AM thin film. The leakage current showed below $10^{-9}A/cm^2$ at the deposition temperature of $250^{\circ}C\;and\;300^{\circ}C$ in the field of 0.1 MV/cm, and it was gradually increased and to be saturated in 0.2 MV/cm. The C-V characteristics of the above mentioned deposition temperature conditions showed a deep depletion phenomenon at inversion region. The C-V characteristics showed similarly under the DC power conditions of 100 and 150 W but were degraded at 200W. When the DC power was 100, 200, and 300 W the dielectric breakdown phenomenon was shown in 2.8, 3.2 and 5.2 MV/cm, respectively. It was found that AIN film was dominated by Poole-Frenkel conduction mechanism.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2256-2261
• /
• 2008

The electric snow melting and deicing system by electric heating cable which is adopted in this study is a part of road facilities to keep surface temperature of the road higher than freezing point of water for melting the snow or ice accumulated on it. The electric heating cables are buried under paved road at a certain depth and a certain pitch and operated automatically and manually. Design theory, amount of heating, and installation standard vary according to economic situation, weather condition, and installation place. A main purpose of this study is figuring out the appropriate range of required heat capacity and installation depth and pitches for solving snowdrifts and freezing problems with minimum electric power consumption. This study was performed under the ambient air temperature($-2^{\circ}C$, $-5^{\circ}C$), the pitches of the electric heating cables (200 mm, 300 mm), heating value ($250\;W/m^2$, $300\;W/m^2$, $350\;W/m^2$).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.234-241
• /
• 2002

In this study, a numerical method which assesses running stability of freight car loading 300m CWR and structural safety of conventional railway track when passing over curves and steel girder bridges is presented. Optimal speed of the freight car is suggest on the basis of numerical reviews for stability of derailment of the freight car and structural safety of track at weak points of the conventional line.

• 대한환경공학회지
• /
• 제35권11호
• /
• pp.776-780
• /
• 2013

본 연구에서는 마이크로파 조사를 통하여 디젤오염토양의 TPH (Total Petroleum Hydrocarbon) 제거양상을 살펴보고자 하였다. 건조토양을 마이크로파로 조사하였을 때 토양 내 온도의 상승은 완만하였으나 수분이 공급된 상태에서 온도 상승이 급격하게 나타났다. 함수량이 20% 이내 범위에서는 수분함량이 증가할수록 온도가 상승하였으나 20% 이상에서는 오히려 온도가 저하되었다. 100~700 W의 전력량으로 마이크로파를 조사한 후 각각의 TPH의 제거량을 확인하였을 때 300 W 이상의 범위에서는 전력량이 높아짐에도 TPH 제거량에 차이가 많지 않았다. 초기 수분량 20%에서 마이크로 조사 시 최종 TPH 제거량은 60%로 나타났으나 추가적으로 수분을 공급하여 토양 내 함수량을 일정하게 유지하였을 때 약 25%의 TPH 제거 증대효과가 나타났다. 이는 마이크로파를 이용할 때 반응이 지속됨에 따라 수분손실과 더불어 온도가 감소하므로 토양 내 함수량을 유지하는 것이 효율적인 TPH제거를 위해 중요한 요인이 될 수 있다는 것을 나타낸다.

• 한국재료학회지
• /
• 제4권6호
• /
• pp.715-722
• /
• 1994

"Smart window"에 코팅재료로 쓰이는 thermochromic $Vo_{2}$박막을 전자빔 증착 방법으로 유리 기판위에 증착시켜 $0^{\circ}C$-$90^{\circ}C$ 온도범위에서 가시광 및 근적외선의 투과율을 spectrophotometer로 측정하였다. $300^{\circ}C$의 기판온도와 $400^{\circ}C$ 어닐링 온도가 $VO_{2}$ 박막이 결정화되기 때문인 것으로 확인되었다. 또한, $VO_{2}$박막을 알곤중에서 어닐링하면 500nm이하의 파장에서는 그 투과율이 상당히 낮아지는 것으로 나타났다. W가 5a/0첨가된 $V_{0.95}W_{0.05}O_{2}$박막은 약 $0^{\circ}C$의 천이돈도를 나타내었고 Sn이 0.5a/o $V_{0.995}W_{0.005}O_{2}$박막의 경우에는 $300^{\circ}C$의 기판온도에서 증착한 후 $450^{\circ}C$/5시간 동안 알곤가스 중에서 어닐링하였을때 뚜렷한 thermochromism을 나타내었으며 이 박막의 천이온도는 실용가능한 온도인 약 $25^{\circ}C$로 발견되었으며 약간의 이력곡선이 나타났다.력곡선이 나타났다.

• 한국항공우주학회지
• /
• 제37권4호
• /
• pp.419-424
• /
• 2009

소형 인공위성의 궤도 보정을 위한 300 W급 홀 추력기의 제논연료공급장치를 개발하였다. 가스 상태의 제논 연료를 150 bar에서 2 kg을 저장할 수 있으며, 0.5 SCCM의 미세 유량을 제어할 수 있다. 미세 유량을 제어할 수 있는 유량 제어밸브의 구동을 위해 시스템을 구성하고, 시험을 통해 성능검증을 수행하였다. 이를 통해 $1.0{\times}10^{-6}$ torr압력의 진공에서 연료공급장치가 성공적으로 동작함을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권8호
• /
• pp.1128-1134
• /
• 2010

본 논문은 수중 로봇용 새로운 구조의 300W급 BLDC모터 기반의 수중 추진시스템의 개발에 대한 것이다. FEM을 통한 수중추진체의 구조해석, 유동해석을 통한 프로펠러 설계 등의 구조설계를 하였다. 또한, 수중추진체의 커플링이 없고, 무감속기 형태의 새로운 구조에 대해 설명하였다. 설계 및 제작한 수중추진체의 성능시험을 육상 및 수중에서 수행하였고 그 결과를 기존의 고성능 제품과 성능을 비교하였다. 그 결과 개발한 시스템이 전방 및 후방 추력성능에서 각각 16%, 및 12%를 개선한 우수한 성능을 나타냄을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.22-25
• /
• 2002

In this paper, we deposited MgO buffer layer on p-type (100)Si substrate in the condition of substrate temperature 400$^{\circ}C$, working gas ratio Ar:O$_2$=80:20, RF Power 50W, working pressure 10mtorr, and the thickness of the film was about 300${\AA}$. Then we deposited Ba$\sub$0.5/Sr$\sub$0.5/TiO$_3$ thin film using RF Magnetron sputtering method on the MgO/Si substrate in various RF power of 25W, 50W, 75W. The film deposited in 50W showed the best crystalline from the XRD measurement. To know the electrical properties of the film, we manufactured Al/BSTMgO(300${\AA}$)/Si/Al structure capacitor. In the result of I-V measurement, The leakage current density of the capacitor was lower than 10$\^$-7/A/$\textrm{cm}^2$ at the range of ${\pm}$150kV/cm. From C-V characteristics of the capacitor, can calculate the dielectric constant and it was 305. Finally we deposited BST thin film on bare Si substrate and (100)MgO substrate in the same deposition condition. From the comparate of the properties of these samples, we found the properties of BST thin film which deposited on MgO/Si substrate were better than on bare Si substrate and similar to on MgO substrate.