• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.560-567
• /
• 2004

In this paper, the design and implementation of a high power(300W) forward converter using a planar transformer is presented. The overall size and volume of the converter is decreased by replacing a planar transformer in stead of using a conventional winding transformer. Due to the decreased size and volume, power density of the applied forward converter is increased. Also, in this paper, the 300W ZVS forward converter with active clamp snubber circuit is compared to the 300W hard switching forward converter planar transformer, the decreased size and volume, the 300W ZVS forward converter with active clamp snubber circuit, 30W hard switching forward converter.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.33-35
• /
• 2004

The size of a PLS 300w's lighting source is smaller than the size of other's. It makes the reflector design of pls 300w more efficient. We designed it and analyzed the result of the reflector design in this paper.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.502-507
• /
• 2004

The forward planar transformer, which had power capacity of 300 W, input voltage of 220 V, output voltage of 15 V, and switching frequency of 300 KHz, was designed and manufactured by using the planar core with large effective area and the flat copper leadframes for miniaturization and high efficiency of the switching mode power supply (SMPS). As well as, a forward converter equipped with the above mentioned planar transformer was manufactured and electromagnetic characteristics were investigated. The numerical value of turns for 1st and 2nd winding were 15 and 2 respectively The self inductance of 1st winding was 1.592 mH, very low leakage inductance of 2.7 $\mu$H, and the coupling factor of 0.928 were obtained at switching frequency of 300 KHz. The high efficiency of 88.62 % for the SMPS equipped with planar transformer was obtained at power capacity of 300 W.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.221-227
• /
• 2000

The optimal capacity of CGS(Co-Generation Sys.) for APT. complex is 300kW output of electricity power from being considered the simple payback period, loss and benefit, and the running mode of CGS. The proper operation mode of CGS is as follows; If the demanding electricity load of APT. complex is within the range of capacity of generator(300kW), CGS is connected and operated with KEPCO grid. When the load ratio is over 50% of normal load of CGS(300kW), only CGS supply electricity demand. If not, the electricity line of CGS is exchanged to that of KEPCO.

• Korean Journal of Materials Research
• /
• v.1 no.4
• /
• pp.177-183
• /
• 1991

Change of the properties of selective CVD-W by $SiH_4$ reduction with the variation of deposition time and pressure has been investigated. The lime required for covering the who)to Si substrate by tungsten at $300^{\circ}C$ under the pressure of 100mtorr is approximately 30 seconds. The film thickness tends to increase linearly in the early stage of deposition process and parabolically later, sheer resistance of the film tends to decrease rapidly initially, and slowly later with deposition time. Tungsten grain size does not change much, but grain boundary becomes hazy in the pressure range of 50-300mtorr. Also no ${\beta}-W$ but only ${\alpha}-W$ was found in this pressure range. The deposition rate and electrical resistivity of tungsten tend to increase wish increasing pressure. The results of AES analysis show that pressure does not much affect Si/W ratio of the tungsten film and silicidation at the W/Si interface.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.10
• /
• pp.1008-1016
• /
• 2013

SAR measurement which was applied only to the mobile phone has been expanded in the Korean radio regulation law to the portable wireless communication equipments within 20 cm from the human body since Jan. 2012. The two-way radio operating at 150 MHz frequency band was newly included following the revised radio regulation in the target equipment of measurement. SAR measurement system at 150 MHz satisfying this regulation is necessary accordingly for SAR conformity assessment. The international SAR measurement standard(IEC 62209-2) includes the evaluation method on frequencies above 300 MHz, and the commercial SAR measurement system can measure SAR above 300 MHz only. The size of the reference dipole antenna(760 mm, return loss: -27.57 dB) and flat phantom ($1,300 mm(L){\times}900 mm(W){\times}200 mm(H)$), targeted SAR values for numerical analysis(1 g: 1.08 W/kg, 10 g: 0.77 W/kg) for SAR validation evaluation at 150 MHz frequency are proposed in this paper. The suggested dipole antenna and flat phantom are assembled and used to verify the conformity assessment of commercial SAR measurement system. The measured SAR values of 1 g and 10 g were obtained respectively to be 1.13 W/kg, 0.81 W/kg, and they satisfied the effective range(within ${\pm}10$ %) of IEC international standard. The standards based on this study are expected to be used for the domestic SAR measurement standard and IEC(International Electrotechnical Commission) international standard.

• Journal of Korean Medicine Rehabilitation
• /
• v.21 no.4
• /
• pp.23-40
• /
• 2011

Objectives: This study was designed to examine the effects of extracts of Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) on the lipid lowering, anti-oxidation and concentration of proinflammatory cytokines and was investigated on hyperlipidemic rats. Methods: Male rats weighing $182.39{\pm}4.71g$ were fed high fat diet for 8 weeks and 36 rats(above 400 g) were divided into 4 groups. Each of 9 rats was divided a control group and experimental groups. We fed a control group of rats a basal diet and administered normal saline(100 mg/kg, 1 time/1 day) for 4 weeks. And we fed each experimental group of rats basal diet and administered an extract of Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) extracts(100 mg/kg, 200mg/kg, 300 mg/kg, 300 mg/kg, 1 time/1 day) for 4 weeks. At the end of the experiment, the rats were sacrificed to determine their chemical composition. We measured lipid of plasma and liver, concentration of proinflmmatory cytokines, anti-oxidative activity and $TNF-{\alpha}$, Apo-B, Apo-E and leptin gene expression. Results: 1. Concentration of plasma free fatty(FFA) showed no significant difference in all the treatment groups. Concentration of plasma triglyceride(TG) showed a significant decrement in the 300 mg/kg in Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) groups than that of control group. 2. Concentration of plasma total cholesterol showed a significant decrement in the 200 and 300 mg/kg in Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) groups than that of control group. Concentration of plasma low density lipoprotein(LDL)-cholesterol showed a Significant decrement in the 300 mg/kg in Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) groups than that of control group. Concentration of plasma high density lipoprotein(HDL)-cholesterol showed a significant increment in the 300 mg/kg in Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) group. 3. Concentration of liver total cholesterol showed a tendence to decrease in Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) groups. Concentration of liver TG showed a significant decrement in all Ojeoksangamibang groups than that of control group. 4. Concentration of plasma and liver thiobarbituric acid reactive substance(TBARS) showed a tendence to decrease in Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) groups. 5. The values of glutathione peroxidase(GSH-Px), superoxide dismutase(SOD) and catalase(CAT) activity showed a significant increment in all Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) groups than that of control group. 6. The values of plasma aspartate aminotransferase(AST) and alanine aminotransferase(ALT) activity showed no significant different in all treatment group. 7. Concentration of plasma $interleukin(IL)-1{beta}$ showed no significant difference in all the treatment groups. Concentration of plasma IL-6 showed a significant decrement in the 300 mg/kg in Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) group than that of control group. Concentration of plasma tumor necrosis $factor-{\alpha}(TNF-{\alpha})$ a siginifant decrement in the 200 and 300 mg/kg in Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) group than that of control group. However the concentration of plasma IL-10 in the 300 mg/kg Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) groups showed a significant increment than that of control group. 9. In the analysis of reverse transcription-polymerase chain reaction(RT-PCR), gene expression of $TNF-{\alpha}$, Apo-B and Apo-E in the Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) groups showed a lower expression than that of control group. However the gene expression of leptin showed no difference in the treatment groups. 10. The ratio of $TNF-{\alpha}$, Apo-B, and Apo-E per ${\beta}-actin$ expression in the Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) groups showed a significant decrement than that of control group. However The ratio of leptin expression per ${\beta}-actin$ expression showed no significant difference among all the treatment groups. Conclusions: According to above results, in lowering lipid effect, anti-oxidation and control of pro-inflammatory cytokines production, Ojeoksangamibang($W{\check{u}}j\bar{i}s\check{a}nji\bar{a}w\grave{e}if\bar{a}ng$) gives effect.

• Current Optics and Photonics
• /
• v.5 no.5
• /
• pp.544-553
• /
• 2021

A 40-W 200-ns 300-kHz thulium-doped fiber laser at 2050 nm with a master oscillator power amplifier configuration was developed, for application to lithium-isotope separation. The master oscillator generated a 5.35 W continuous-wave beam, which the pulse generator then broke into 200-ns pulses at 300 kHz. Then, the laser beam was amplified by passing through a two-stage amplifier. The output power finally obtained was 42.0 W at 2050 nm, and was stable for a long time, over 2 hours. In spite of this achievement, mode instability was observed in the output beam. This can be solved in the future by using a method such as tight coiling.

• Journal of Powder Materials
• /
• v.5 no.3
• /
• pp.210-219
• /
• 1998

The W-Cu composite powders were synthesized from W and Cu elemental powders by ball-milling process, and their microstructural changes and sintering behaviors were evaluated. The ball milling process was carried out in a 3-dimensional mixer (Turbula mixer) using zirconic ($ZrO_2$) ball and alumina ($Al_2O_3$) vial up to 300 hrs. The ball-milled W-Cu powders revealed nearly spherical shape. Microstructure of the composite powders showed onion-like structure which consists of W and Cu shells due to the moving characteristic of Turbula mixer. The W and Cu elements in the composite powders milled for 300 hrs were homogeneously distributed, and W grain size in the ball-milled powder was smaller than 0.5 $\mu\textrm{m}$. Fe impurity introduced during ball milling process was very low as of 0.001 wt%. The relative sintered density of ball-milled W-Cu specimens reached about 94% after sintering at $1100^{\circ}C$.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.06a
• /
• pp.234-235
• /
• 2004