• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.193-205
• /
• 2019

Looking at recent safety accidents in buildings, most of them due to lack of FM expertise, and this is due to human resources. In each all industry areas, some companies are competitive, representational, and leading in the market through long-term expertise and research in their respective fields. In the field of FM industry, some companies offer core-competencies in internal and external innovative building management through competition with others. However, old custom and old management form still exist in the FM field. However, an old custom and old management system still exist in the FM field; it forces cost-cutting and caused by carelessness in technical development competitiveness and safety measures. The government control by safety inspection and facility inspection through legislation of building management, but the management is still weak as a side of in the facility management section due to inspect sth as a mere formality and submit a paper report. These facts exist different kind of usage of the building have a three-party encounter between a building owner, user, and FM enterprises. In this research identify survey, especially building owner (manager)'s choice perception priority for optional factors to choose FM enterprises. Based on this, FM enterprises will be forced to seek a new dimension for better building management. In this light, the purpose of the research is to shape changes in the FM market culture safely and providing better service in building management and understanding building owner's insight through this research's information.

• Textile Coloration and Finishing
• /
• v.34 no.3
• /
• pp.157-164
• /
• 2022

This study tried to analyze the heat resistance properties by blending epoxy and phenolic resin in a certain ratio, and to analyze the adhesive properties at the time of metal-polymer hetero-adhesion by applying Epoxy-phenolic resin between a silicon steel sheet and m-aramid sheet, the viscosity, adhesive peel strength, and adhesive cross section were measured using a rotational rheometer, a tensile tester(UTM), and a field emission scanning electron microscopy(FE-SEM). The thermal stability and heat resistance were confirmed by measuring the mass loss according to the temperature increase using Thermogravimetric analysis(TGA). After blending with epoxy and Phenolic resin(1:0.25 ratio) curing at 110℃ for 10 min, high adhesive strength was improved more than 40% compared to the adhesive strength using epoxy alone. When the space between the silicon steel sheet and m-aramid sheet, which is created during curing of the E-P blend, is cured with a slight weight, it is possible to control the empty space and improve adhesion.

• Journal of Korean Public Health Nursing
• /
• v.23 no.2
• /
• pp.273-284
• /
• 2009

Purpose: The study examined obesity conditions and related factors in middle aged Korean women who had been diagnosed as obese based body mass index (BMI) or waist circumference (WC) measurement. Presently, BMI alone, WC alone, or BMI + WC were used as obesity measures. Methods: Subjects were 488 women 40~64 years of age living in one city, Korea. Structured questionnaires concerning general characteristics, health behavior practices, and chronic disease history were completed by each subject. Results: The proportions of obesity were 42.4% by BMI, 39.3% by WC, and 51.3% by the combination of both measurements. Chi-square test revealed significant associations of obesity with age, education level, menopausal status, frequency of excessive eating, and history of diabetes mellitus or hypertension. These associations were similar for the three measurement schemes. There was significant positive relationship between BMI and WC, whereas the relationship between BMI and WHR (waist-hip ratio) was not significant. Conclusions: The combination of BMI and WC measurement may be a valid way to evaluate the obesity status in middle-aged women. Developing an obesity management program that includes control of excessive eating, and consideration of menopausal status and history of chronic diseases would be prudent.

• Advances in nano research
• /
• v.15 no.3
• /
• pp.215-224
• /
• 2023

Nonlinearity plays an important role in control systems and the application of design. For this reason, in addition to linear vibrations, nonlinear vibrations of the stepped nanobeam are also discussed in this manuscript. This study investigated the vibrations of stepped nanobeams according to Eringen's nonlocal elasticity theory. Eringen's nonlocal elasticity theory was used to capture the nanoscale effect. The nanoscale stepped Euler Bernoulli beam is considered. The equations of motion representing the motion of the beam are found by Hamilton's principle. The equations were subjected to nondimensionalization to make them independent of the dimensions and physical structure of the material. The equations of motion were found using the multi-time scale method, which is one of the approximate solution methods, perturbation methods. The first section of the series obtained from the perturbation solution represents a linear problem. The linear problem's natural frequencies are found for the simple-simple boundary condition. The second-order part of the perturbation solution is the nonlinear terms and is used as corrections to the linear problem. The system's amplitude and phase modulation equations are found in the results part of the problem. Nonlinear frequency-amplitude, and external frequency-amplitude relationships are discussed. The location of the step, the radius ratios of the steps, and the changes of the small-scale parameter of the theory were investigated and their effects on nonlinear vibrations under simple-simple boundary conditions were observed by making comparisons. The results are presented via tables and graphs. The current beam model can assist in designing and fabricating integrated such as nano-sensors and nano-actuators.

• Journal of Korean Society on Water Environment
• /
• v.39 no.6
• /
• pp.439-450
• /
• 2023

The Yeongsan River, a major water resource for Jeollanam-do, that is adjacent to industrial complexes and agricultural areas, is exposed to water pollution. Therefore, it is necessary to investigate the impact of water pollution incidences and prepare response systems for river environment safety for other water resources in the future. Environmental Fluid Dynamics Code (EFDC) was applied to the mainstream of the Yeongsan River where residential, commercial, and agricultural areas are located to analyze the behavior of pollutants conducting the scenario analysis. Considering the pollutants that affected the study area, two pollutants, oil and benzene, with different physical and chemical characteristics were selected for the analysis. As a result of comparing the actual and simulated values of the water elevation, temperature, and flow rate, it was confirmed that the model adequately reproduced the hydraulic characteristics of the Yeongsan River. The oil flow dynamics showed that an increase in flow rate led to reduction in the maximum height of the slick. Notably, the behavior of the oil was predominantly influenced by the wind conditions. In the case of benzene, lower flow scenarios exhibited decreased arrival times and residence times accompanied by an elevation in the maximum concentration levels. From the results of pollutant behavior in the study area, it is feasible to utilize the section of tributary confluence for collection and the weir area for dilution. This study enhances the understanding of the pollutant's behavior with different characteristics and develops effective control systems tailored to the physicochemical attributes of pollutants.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.2
• /
• pp.59-65
• /
• 1981

The purpose of the present study is to find the light intensity which induces maximum gathering rate and to observe the variation of the gathering rate both in daytime and at night by rising two species of commercial fishes: gray rock cod. Sebastes inermis (Cuvier et Valenciennes) and cat shark, Scyliorhinus torazame (Tanaka). An experimental tank $(360L\;{\times}\;50W\;{\times}\;55H\;cm)$ was set up in a dark room. An illumination system was attached to one end of the tank to control horizontal light intensity. Six artificial light sources were prepared by combination of two light bulbs (5W, 150W) and seven filters. During the experiment water depth was maintained 50 cm level in the tank. The tank was marked into six longitudinal sections each being 60 cm long to observe the distribution of fish. The fish were acclimatized in dark condition for 40 minutes prior to the main experiment. Upon turning on the light, the number of fish in each section was counted 40 times every 30 seconds, and the gathering rates were obtain from the average number of fish in each section. The light intensity inducing maximum gathering rate is as follows: gray rock cod: 16.6 lux (10.6-24.5 lux) (day), 0.7 lux (0.5-1.1 lux) (night), cat shark: 1.9 lux (1.2-2.9 lux) (day), 16.6 lux(10.6-24.5lux) (night). Trend of the gathering rate in illumination time revealed different results in two fish species. Gathering rate of gray rock cod did not show any definite pattern but fluctuated irregularly. The gathering rate was some fluctuating at night. However, that of cat shark was almost constant and did not show any distinctive difference between day and night.

• Animal Systematics, Evolution and Diversity
• /
• v.7 no.1
• /
• pp.151-176
• /
• 1991

The arthropods are the most diverse and successful animal group making up more than three quarters of the total animal species. They also live in a great diversity of habitats on the earth. Because of these unavoidable circumstances, the human life has always been affected by them. Therefore, in many countries from the past, governments have supported the studies of the arthropods on the basis of the national policy. However, the present situation of ours is far behind the other advanced contries, Now we urgently need governmental support fro the development of both the basic and the applied fields of arthropod studies in the well organized manner. Facing with this necessity, the present article reviewed the studies of Korean arthopods based on insect and crustacean representing most of the arthopods. Several subjects were reviewed in the section of the past and present studies on Korean arthropods. These are the studies on Korean arthropods in the past and present, their application to the national strategy, and the present condition of curating specimens, etc. From these reviews, several important points were suggested in the section of future plan. These are such subjects as the establishment of national institution for the curation of specimens , computerizing the data, diversification of research techniques, valid strategy concerning the control of harmful contribution to the nature conversation and environmental management , use as a research animal, the enhancement of public welfare, training of specialists, and policies for the national programs.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.5
• /
• pp.217-227
• /
• 2017

The object of this study is to estimate the net volume transport and the residual flow that changed by space and time at southern part of Yeomha channel, Gyeonggi Bay. The cross-section observation was conducted at the mid-part (Line2) and the southern end (Line1) of Yeomha channel for 13 hours during neap and spring-tides, respectively. The Lagrange flux is calculated as the sum of Eulerian flux and Stokes drift, and the residual flow is calculated by using least square method. It is necessary to unify the spatial area of the observed cross-section and average time during the tidal cycle. In order to unify the cross-sectional area containing such a large vertical tidal variation, it was necessary to convert into sigma coordinate system by horizontally and vertically for every hour. The converted sigma coordinate system is estimated to be 3~5% error when compared with the z-level coordinate system which shows that there is no problem for analyzing the data. As a result, the cross-sectional residual flow shows a southward flow pattern in both spring and neap tides at Line2, and also have characteristic of the spatial residual flow fluctuation: it northwards in the main line direction and southwards at the end of both side of the waterway. It was confirmed that the residual flow characteristics at Line2 were changed by the net pressure due to the sea level difference. The analysis of the net volume transport showed that it tends to southwards at $576m^3s^{-1}$, $67m^3s^{-1}$ in each spring tide and neap tide at Line2. On the other hand, in the control Line1, it has tendency to northwards at $359m^3s^{-1}$ and $248m^3s^{-1}$. Based on the difference between the two observation lines, it is estimated that net volume transport will be out flow about $935m^3s^{-1}$ at spring tide stage and about $315m^3s^{-1}$ at neap tide stage as the intertidal zone between Yeongjong Island and Ganghwa Island. In other words, the difference of pressure gradient and Stokes drift during spring and neap tide is main causes of variation for residual current and net volume transport.

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.50-57
• /
• 2011

This study investigates the structural safety of typical greenhouse to be utilized for developing plant factory. New long-span greenhouse systems were presented according to the results of structural analyses performed by finite-element program, ABAQUS. Reasonable values of design loads such as wind and snow loads in the Greenhouse Design Specifications (1995) were applied to check the new greenhouse systems. It was concluded that the new greenhouse systems were consistently safe enough to resist to both wind load and snow load. The new greenhouse system can be used to make simple and economic plant factory.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.217-221
• /
• 2007

To provide the basic data essential for developing varieties of broad-leaved tree, the study investigated the utmost growth requirement for the growth characteristic and biomass production in accordance with planting density of Styrax obassia. The planting density of seedling can be a significant factor in contributing growth of seedling for tree growing in general. While growth of tree according to $1m^2$ planting density of Styrax obassia showed an excellent growth in tree height and the root collar diameter from $49no./m^2$, those low planting density showed decreased tendency with tree height growth while increasing the root collar diameter growth. As similar to the growth characteristic, the biomass production showed significant and statistic difference in $49no./m^2$, showing high volume of biomass production which is $3.12{\pm}0.80g$ compare to other processing section and high figure with T/R ratio which is 1.59. The special trait of photosynthetic also showed relatively high photosynthetic rate in $49no./m^2\;and\;64no./m^2$ of Styrax obassia and as the density increase, photosynthetic efficiency decreased. The plant showed stable and physiological planting pattern, displaying the best photosynthetic rate, which was the final metabolism through reserving proper space in the growth and development environment condition. This obstacle of required space essential for growth substantially deteriorated planting and ultimately, it demonstrated lower tendency of photosynthetic rate, which is the highest level of metabolism.