• Korean Journal of Plant Resources
• /
• v.14 no.2
• /
• pp.152-156
• /
• 2001

This study was conducted to investigate the flower organ removal effect on Atractylodes macrocephala Koidz which was introduced from China. The results were summarized as follows; The plant height of Flower Organ Cutting(F.O.N.C.) treatment short by 1.7∼2.5 cm compared to Flower Organ Non-Cutting(F.O.N.C.) treatment. But number of stem and stem diameter of F.0.C treatment were similar to that of F.O.N.C. treatment. The fresh weight of above-ground part of F.O.N.C. treatment was decreased 48∼60% compare to F.O.C. treatments. The later was period of F.O.C., the higher was fresh weight of above-ground part. The growth of underground part was more F.O.C. at July 15 and Aug. 20 treatments than F.O.N.D treatment. The dry rhizome yield of F.O.C. at July 15 treatment was increased 40% compare to F.O.N.D treatment. Essential oil content of F.O.C. at July 15 treatment was increased 12% compare to F.O.N.D treatment.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.6
• /
• pp.694-699
• /
• 2012

In this paper, semiconductor package inspection results using white light interferometer with large F.O.V., in order to apply semiconductor product inspection process, are shown. Experimental 3D data repeatability test results for the same special bumps of each substrate are shown. Experimental 3D data repeatability test results for all the bumps in each substrate are also shown. Semiconductor package inspection using white light interferometer with large F.O.V. is very important for the fast 3D data inspection in semiconductor product inspection process. This paper is surely helpful for the development of in-line type fast 3D data inspection machine.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.2
• /
• pp.76-82
• /
• 2003

The robust stack storage node and sufficient cell capacitance for high performance is indispensable for 90 nm DRAM capacitor. For the first time, we successfully demonstrated MIS capacitor process integration for 90 nm DRAM technology. Novel cell layout and integration technology of 90 nm DRAM capacitor is proposed and developed, and it can be extended to the next generation DRAM. Diamond-shaped OCS with 1.8 um stack height is newly developed for large capacitor area with better stability. Furthermore, the novel $Al_2O_3/HfO_2$ dielectric material with equivalent oxide thickness (EOT) of 25 ${\AA}$ is adopted for obtaining sufficient cell capacitance. The reliable cell capacitance and leakage current of MIS capacitor is obtained with ~26 fF/cell and < 1 fA/ceil by $Al_2O_3/HfO_2$ dielectric material, respectively.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.353-356
• /
• 2001

The relation between the flocculation and dispersion of metal oxide powders and the properties of solvents, such as dielectric constant and solubility parameter, was investigated for TiO$_2$, $Al_2$O$_3$and Fe$_2$O$_3$particles. The particle size and median diameter of these metal oxides were measured in many organic solvents, from which the effect of solvents on the flocculation and dispersion of metal oxide powders was considered. The metal oxide powders of TiO$_2$, $Al_2$O$_3$and Fe$_2$O$_3$tend to disperse in a solvent of higher polarity, whereas they are apt to flocculate in a solvent of low dielectric constant, because the Hamaker constant between the particles becomes larger in such a solvent. There we, however, some solvents that do not obey these tendencies. It is possible to evaluate the flocculation and dispersion of these metal oxide powders in many solvents by using numeral balances of Hansen’s three-dimensional solubility parameter (f$_{d}$, f$_{p}$ and f$_{h}$). There exists a solvent giving the optimal dispersion for each metal oxide, and the optimal dispersion point of f$_{d}$, f$_{p}$ and f$_{h}$ is determined by the combination of various metal oxide powders and solvents.nts.nts.nts.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.412-412
• /
• 2014

Zinc oxide (ZnO) is one of the most powerful materials for purifying organic pollutants using photocatalytic activity. In this study, we have introduced a novel method to design highly photoreactive flexible 3 dimensional (3D) ZnO nanocomposite [F-ZnO-m (m: reaction time, min)] by electrospinning and simple-step ZnO growth processing (one-step ZnO seed coating/growth processing). Significantly, the F-ZnO-m could be a new platform (or candidate) as a photocatalytic technology for both morphology control and large-area production. The highest photocatalytic degradation rate ([k]) was observed for F-ZnO-m at 2.552 h-1, which was 8.1 times higher than that of ZnO nanoparticles (NPs; [k] = 0.316 h-1). The enhanced photocatalytic activity of F-ZnO-m may be attributed to factors such as large surface area. The F-ZnO-m is highly recyclable and retained 98.6% of the initial decolorization rate after fifteen cycles. Interestingly, the F-ZnO-m samples show very strong antibacterial properties against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) after exposure to UV-light for 30 min. The antibacterial properties of F-ZnO-m samples are more effective than those of ZnO NPs. More than 96.6% of the E. coli is sterilized after ten cycles. These results indicate that F-ZnO-m samples might have utility in several promising applications such as highly efficient water/air treatment and inactivation of pathogenic microorganisms.

• Korean Journal of Materials Research
• /
• v.22 no.9
• /
• pp.489-493
• /
• 2012

Green phosphors $K_2BaW_2O_8:Tb^{3+}$(1.0 mol%) were synthesized by solid state reaction method. Differential thermal analysis was applied to trace the reaction processes. Three endothermic values of 95, 706, and $1055^{\circ}C$ correspond to the loss of absorbed water, the release of carbon dioxide, and the beginning of the melting point, respectively. The phase purity of the powders was examined using powder X-ray diffraction(XRD). Two strong excitation bands in the wavelength region of 200-310 nm were found to be due to the ${WO_4}^{2-}$ exciton transition and the 4f-5d transition of $Tb^{3+}$ in $K_2BaW_2O_8$. The excitation spectrum presents several lines in the range of 310-380 nm; these are assigned to the 4f-4f transitions of the $Tb^{3+}$ ion. The strong emission line at around 550 nm, due to the $^5D_4{\rightarrow}^7F_5$ transition, is observed together with weak lines of the $^5D_4{\rightarrow}^7F_J$(J = 3, 4, and 6) transitions. A broad emission band peaking at 530 nm is observed at 10 K, while it disappears at room temperature. The decay times of $Tb^{3+}$ $^5D_4{\rightarrow}^7F_5$ emission are estimated to be 4.8 and 1.4 ms, respectively, at 10 and 295 K; those of the ${WO_4}^{2-}$ exciton emissions are 22 and 0.92 ${\mu}s$ at 10 and 200 K, respectively.

• Conservation Science in Museum
• /
• v.23
• /
• pp.71-90
• /
• 2020

The scientific analysis of a 'F-51D Mustang Fighter'(Registered Cultural Heritage 666), one of the War Memorial of Korean collections, was carried out. The paint layer and canopy were discolored due to a constant outdoor exhibit. The results obtained through the scientific survey and analysis processes were intended to be used as basic data for the future dismantling and restoration of the fighter. The analysis results for the pigment components have confirmed red oxide of iron, Fe₂O₃ organic pigments, such as Cobalt Blue, phthalocyanine blue, etc., yellow PbCrO₄, white TiO₂, black Fe₃O₄, and gray Fe₃O₄ + TiO₂. It has been also confirmed that Alkyd resin was mainly used for painting. The fighter's canopy was Poly methyl methacrylate(PMMA), and Al was detected as the main component of the fighter body, wings, and tails.

• Journal of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.548-554
• /
• 1990

Temperature effects on the fluorescence emission spectra of 0.01 M Eu(III) ion with ClO$_4$, Cl$^-$, NO$_3$ were studied. Relative intensity change of hypersensitive band ($^5D0\; {\to}\;^7F_2$) and nonhypersensitive band ($^5D0 \;{\to}\;^7F_1$) was quite remarkable with temperature and ligand. The relative intensity change was interpreted as the change of formation constant and used to calculation the enthalpy change of $Eu(H_2O)_X^{3+}$+ to EuL(H$_2O)_{X-1}^{2+}$ complex. $\Delta{H}$ of $Eu(H_2O)_X^{3+}$ to EuCl(H$_2O)_{X-1}^{2+}$ was roughly 15 kJ/mol and temperature independent, but $\Delta{H}$ of EuNO$_3(H_2O)_{X-1}^{2+}$ was changed with temperature; -11 kJ/mol at 25$^{\circ}C$ and 47 kJ/mol at 250$^{\circ}C$.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.114-115
• /
• 2003

양식 생물에게 있어 용존산소는 호흡에 필수적이며, 양식 시설 내에서 적절한 용존 산소량을 유지하는 것은 생산량을 좌우하는 가장 중요한 요인이며, 어종, 수온, 광주기, 나이와 크기, 어류의 행동과 먹이 공급 및 환경 조건에 따라 달라진다. 이 중 같은 종 내에서 선발육종된 개체와 일반 양식 종 그리고 이들 계통간 잡종에 대한 대사 효율 즉, 용존산소 소비율의 차이에 관한 연구는 거의 없다. 따라서 본 실험에서는 한국해양연구원에서 선발육종 해 온 참돔과 일본 양식산 참돔 및 이들의 교배 자손들을 대상으로 수온과 광주기 변화에 따른 용존산소 소비율을 조사하였다. 실험어는 일본 양식산인 TPN 교배구 자손과 한국해양연구원 선발육종산인 KORDI F4 교배구 자손, JPN♀×KORDI F4♂ 그리고 KORDI F4♀×JPN♂ 교배구 자손을 대상으로 실시하였다. 체중이 각각 52.0±0.6 g(JPN 교배구; 그룹 1), 52.3±0.7 g(JPN♀×KORDI F4♂; 그룹 2), 51.7±0.4 g(KORDI F4♀ × KORDI F4♂; 그룹 3) 그리고 52.1±0.7 g(KORDI F4♀ × JPN♂; 그룹 4)인 참돔 치어를 각각 5마리씩 3반복 수용하여 실험에 이용하였다. 실험기간 동안 사육수의 pH는 8.1±0.1, 염분도는 34.0±0.5‰로 유지하였으며, 실험 장치는 김(1999)이 고안한 순환 시스템을 이용하였다. 수온은 각각 15℃, 20℃ 및 25℃로 변화시켰으며 각 수온 조건에서 광주기를 24L:0D, 12L:12D 그리고 0L:24D로 변화시켜 매 조건마다 용존 산소 소비량을 측정하였다. JPN 교배구인 그룹 1의 경우, 수온 15℃일 때 산소 소비량은 170.35∼266.29 mg O₂/kg fish/hr의 범위를 보였으며 수온 20℃와 25℃일 때 각각 236.76∼307.37 mg O₂/kg fish/hr와 346.96∼459.30 mg O₂/kg fish/hr 범위를 보여 수온 상승에 따라 산소 소비량 역시 증가하는 것으로 나타났다. 그룹 2의 경우, 수온 15℃일 때 산소 소비량은 162.01∼279.51 mg O₂/kg fish/hr의 범위를 보였으며 수온 20℃와 25℃일 때 각각 303.48∼342.72 mg O₂/kg fish/hr와 447.18∼528.45 mg O₂/kg fish/hr 범위를 보여 그룹 1과 마찬가지로 수온 상승에 따라 산소 소비량 역시 증가하는 것으로 나타났다. 그룹 3의 경우, 수온 15℃일 때 산소 소비량은 170.11∼220.98 mg O₂/kg fish/hr의 범위를 보였으며 수온 20℃와 25℃일 때 각각 262.62∼282.27 mg O₂/kg fish/hr와 302.24∼415.73 mg O₂/kg fish/hr 범위를 보여 그룹 1, 2와 유사한 경향을 보였다. 그룹 4의 경우, 수온 15℃일 때 산소 소비량은 156.03∼214.49 mg O₂/kg fish/hr의 범위를 보였으며 수온 20℃와 25℃일 때 각각 238.40∼274.28 mg O₂/kg fish/hr와 379.93∼430.97 mg O₂/kg fish/hr 범위를 보여 수온 상승에 따라 산소 소비량 역시 증가하는 것으로 나타나, 그룹 1, 2와 유사한 경향을 보였다. 모든 실험구에서 수온 상승과 함께 산소 소비량이 증가하는 것으로 나타났으며 가장 높은 산소 소비량은 그룹 2에서 관찰되었다. 실험 결과 JPN 계통의 암컷을 사용하여 생산된 그룹 1과 2의 산소 소비량이 KORDI F4 계통의 암컷을 사용한 그룹 3, 4보다 대체적으로 높은 것으로 나타났다. 연속적인 명기 조건인 24L:0D에서 수온 15℃의 경우 그룹 1, 2, 3 그리고 4의 시간당 산소 소비량은 각각 266.29 mg O₂/kg fish/hr,279.51 mg O₂/kg fish/hr, 220.98 mg O₂/kg fish/hr 그리고 214.49 mg O₂/kg fish/hr으로 나타났고, 명기와 암기가 동일한 조건인 12L:12D에서는 각각 192.20 mg O₂/kg fish/hr, 258.03 mg O₂/kg fish/hr, 192.76 mg O₂/kg fish/hr 그리고 170.40 mg O₂/kg fish/hr로 나타났다. 또한 연속적인 암기 조건인 OL:24D 조건에서는 각각 170.35 mg O₂/kg fish/hr, 162.01 mg O₂/kg fish/hr, 170.11 mg O₂/kg fish/hr 그리고 156.03 mg O₂,/kg fish/hr로 나타났다. 그리고 수온 20℃와 25℃에서도 그룹간의 변화는 이와 비슷한 경향을 보였다. 연속 명기 조건인 24L:0D에서의 산소 소비량이 명기와 암기가 동일한 조건인 12L:12D와 연속 암기 조건인 0L:24D에서의 산소 소비량 보다 대체적으로 높은 것으로 나타났으며, 그룹 2의 연속 명기 조건에서 528.45 mg O₂/kg fish/hr으로 가장 높게 나타났다. 그룹 4에서는 대사량이 점점 더 높아지는 수온 상승과 함께 연속 명기 조건과 더불어 12L:12D 조건에서의 산소 소비량이 크게 증가하는 것으로 나타났다.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.5
• /
• pp.520-528
• /
• 2013

A 20 mm diameter of small 5-D.O.F. force sensor has been developed for applications in MR-field Optical intensity modulation was adopted for transducing to miniaturize the sensor structure. For its accurate sensing of 5-D.O.F. force/moment, the elastic detecting module was designed to respond independently to each force or moment component. And for small size, two optical transducing modules of 2-D.O.F. and 3-D.O.F. were designed and integrated with the detecting module where optical fibers were arranged in parallel to make the sensor small. It is confirmed by calibration test that the detecting modules deforms linearly and independently to the input force. The results of evaluating test show that the range and resolution of forces are ${\pm}4$ N and 0.94~7.1 mN and the range and resolution of moments are ${\pm}120N{\cdot}mm$ and $0.023{\sim}0.034N{\cdot}mm$.