• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.1
• /
• pp.116-125
• /
• 2021

A three-dimensional (3D) intraoral scanner, which is one of the major developments in digital dentistry, is widely used in fixed prosthodontics. The application of intraoral scanner is now increasing in removable prosthodontics. Sclerotic change induced by scleroderma causes the limitation of mouth opening and multiple loss of the teeth. Conventional prosthodontic procedures are challenging for patients with this disease. This study showed a case of digital approach to the removable prosthodontic treatment of a patient who had the scleroderma and the consequent microstomia. At the provisional stage, the optical impression of patient's oral structures was digitally obtained. Using a 3D printer, the provisional dentures were fabricated. After extraction of hopeless tooth, the definitive digital impression was taken and the metal frameworks were fabricated, based on the data acquired from the impression. The definitive removable partial dentures were completed and delivered to the patient, who was satisfied with the prostheses.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.545-551
• /
• 2017

It is very important to effectively obtain the information related to the human body shape for user-centered design. The human body shape is a huge combination of various irregular curves and is typically obtained by a 3-D Scanner. 3-D scanners show high reliability; however, they are expnsive equipment with limited mobility. 3-D models of irregular-shaped curves were created by a photogrammetric approach and the errors between the original curve and the models were evaluated. 3-D models were created based on 160, 80, 40, 20, 10, and 5 marking points evenly located on the original curve. In the case of convex curve, low levels of residuals were observed in the models from 160, 80, 40, and 20 marking points (0.13% max). In the combination of convex and concave curves, relatively low levels of residuals were observed in the models from 160, 80, and 40 marking points (0.29%). It is possible to conclude that marking points should be placed at every 5% of overall length of a convex curve and at every 2.5% of overall length of a curve with convex and concave curve in order to maintain low levels of errors. A photogrammetric approach can be used as an alternative for the 3-D scanners with advantages of low cost and mobility.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.287-300
• /
• 2018

The aim of this study was to compare the morphological characteristics of two types of stainless steel permanent molar crowns using three-dimensional scanners and the morphological changes of these crowns after crimping. Two types of stainless steel permanent molar crowns, PO-96 and PERMACROWN were scanned using three-dimensional scanner. Crown size, crown index (ratio of buccolingual diameter to mesiodistal diameter at height of contour), cervical convergency of crown were measured. Stainless steel crowns were crimped and re-scanned with three-dimensional scanner. Morphological changes of stainless steel permanent molar crowns were analyzed. As for the crown index, maxillary PERMACROWN was larger buccolingually and smaller mesiodistally than maxillary PO-96 and mandibular PERMACROWN was smaller buccolingually and larger mesiodistally than mandibular PO-96. Maxillary PO-96 was more convergent to cervical mesiodistally than maxillary PERMACROWN and mandibular PO-96 was more convergent to the cervical mesiodistally, buccolingually than mandibular PERMACROWN. Both types of stainless steel permanent molar crowns showed reduction of cervical circumference after crimping. Two products were morphologically different in crown size, shape and cervical convergence. Although both types of stainless steel permanent molar crowns are pre-contoured type, additional crimping is needed to achieve better marginal adaptation.

• Electronics and Telecommunications Trends
• /
• v.12 no.6 s.48
• /
• pp.15-23
• /
• 1997

본 논문에서는 실존하는 물체의 3차원 모델을 만드는 방법들 중에서 물체로부터 직접 정보를 얻어내어 매우 사실적인 3차원 모델을 제작하는 기법들에 대한 현재까지의 기술들에 대해 분석해보고 앞으로의 발전 방향에 대한 전망을 해보았다. 실제 물체의 데이터를 얻어내는 방법은 크게 세가지로 나뉘며 3차원 디지타이저, 3차원 레이저 스캐너 그리고 사진을 이용하는 방법이 있다. 이러한 방법들이 기초적인 요구 사항을 만족하고 있는지와 핵심기술은 어떠한 것들인지를 분석해본다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.579-584
• /
• 2001

컴퓨터 그래픽스 기술을 이용한 응용분야가 증가함에 따라 물체의 사실적인 모델에 대한 요구가 증가되고 있다. 모델링 시간이 많이 필요한 기존의 3차원 모델링 툴 외에 최근에 사용자의 스케치에 기반한 모델링 방법과 영상기반 모델링, 3차원 스캐너가 발표되었지만, 정확성이 떨어지거나 고가의 장비를 필요로 하는 단점이 있다. 본 논문에서는 정육면체 프레임과 광평면(light plane) 프로젝터, 카메라를 이용한 물체의 3차원 구조 복원 시스템을 제안하고, 실험을 통하여 모델링의 정확도를 분석한다.

• Annual Conference of KIPS
• /
• 2001.04b
• /
• pp.1213-1216
• /
• 2001

본 연구에서는 기존의 방법에 비하여 3차원 스캐너나 카메라를 이용하지 않고 비용과 노력을 크게 절감하면서 실감나는 얼굴 모델링을 효율적으로 수행하는 웹 기반 3차원 얼굴 모델러를 제안한다. 클라이언트측의 사용자가 본 시스템에 접속하면 자바 애플릿의 얼굴모델러가 실행되며, 사용자는 두 장의 사진을 입력으로 하여 웹브라우저만으로 3차원 얼굴 모델을 생성하게 된다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04b
• /
• pp.628-630
• /
• 2001

사용자에게 친근감 있는 인터페이스를 제공하는 얼굴 모델링에 대한 연구가 활발히 진행 중이다. 본 논문에서는 기존 방법인 3차원 스캐너가 카메라를 이용하지 않고 얼굴의 정면상과 측면상의 사진을 이용하여 크기와 배경의 복잡성에 상관없이 일반적인 특징점을 추출하여 삼각형 메쉬로 구성된 표준 모델을 생성하고 이를 이용해서 3차원 얼굴의 형태를 생성하는 시스템을 제안한다. 추출된 특징점은 각개인의 얼굴 형태에 맞게 변형함으로서 좀더 현실적인 3차원 얼굴 모델링을 제공한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.396-399
• /
• 2002

A roughing process is the one of most important shoe manufacturing processes. Especially, it is indispensable to manufacture the leather shoes such as dress shoes, safety shoes, golf shoes, etc. The roughing process relies greatly on the operator's skill and experience. Therefore, the automation of roughing process is necessary to establish the improvement of productivity. We are trying to develop the Automatic Roughing Machine controlled by NC. As pre-study to do this, we need to measure the roughing path for NC, because there is no study on this pan and no reference about this. In this study, we proposed the 3-Dimensional Scanner System to measure the roughing path with new concept. The developed 3-D scanner System generates the roughing path using the 3 images obtained from 3 CCD cameras. The experimental results show that the proposed system can measure accurately the roughing path.

• Geotechnical Engineering
• /
• v.25 no.10
• /
• pp.21-34
• /
• 2009

• Tunnel and Underground Space
• /
• v.17 no.3 s.68
• /
• pp.165-174
• /
• 2007

The technique, which reproduces the figures of objects from measured data of the objects using 3-D laser scanner, is called reverse engineering. Recently, research studies into applications of reverse engineering to rock engineering are increasing in number, in the discontinuity surveys for rock slopes out of man's reach, or rapid discontinuity surveys for wide range areas. For analysis of discontinuity using reverse engineering, a program for processing point clouds data from the 3-D laser scanner, for sampling from these point clouds data, and finally analyzing the discontinuity is needed. However, existing programs rarely have sufficient functions to properly analyze the discontinuities. In this study, a program was developed, which can automatically sample discontinuities from the point clouds data which measured in a rock slope using a 3-D laser scanner, and which can also undertake statistical analysis of the discontinuities. This developed program was verified by the application of discontinuity surveys in a rock slope and a tunnel. By undertaking the discontinuity survey using a 3-D laser scanner and the developed program, the feasibility and rapidity of such surveys is expected to improve in areas out of man's reach in geotechnical surveys. Taking into consideration the fact that the international level of related techniques is at a rudimentary stage, the possibility of prior occupation of a broad market is also expected.