• Bioindustry News
• /
• v.10 no.4
• /
• pp.16-22
• /
• 1997

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.164-169
• /
• 1996

핵연료집합체의 하단고정체는 상단고정체와 안내관을 통해 전달되는 하중들로부터 연료봉을 보호하는 주요부품이다. 하단고정체의 구조적 건전성을 유한요소법으로 평가하기위해 상용프로그램인 PATRAN과 ANSYS 5.1을 사용하였다. 하단고정체의 3차원 global 모델에 대한 응력해석을 수행하였으며 응력집중이 일어나는 유로구멍사이의 ligament 부분에 대해 submodeling 기법을 이용하여 해석의 정확도를 높였다. 본 연구에서 수행한 응력해석결과를 하단고정체 구조강도 시험에서 얻은 시험결과와 비교함으로서 응력해석모델에 대한 신뢰성과 보수성을 확인하였고 영광 3&4호기의 핵연료집합체에 부착된 하단고정체가 설계하중에 대해 충분한 건전성을 유지하고 있음을 증명하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.22-23
• /
• 2001

광결정(Photonic crystals)은 유전체를 주기적으로 배치한 구조인데, 이런 구조에 의해 1차원, 2차원, 또는 3차원적으로 빛을 제어할 수 있다. [1] 이런 주기적인 구조로 인해 광결정 내에서는 특정에너지와 특정 방향을 가진 빛이 진행하지 못하는 광밴드 갭(photonic band gap)뿐만 아니라 밴드구조와 밀접한 관계가 있는 비정상적인 광분산이 나타나기도 한다. 이러한 비정상적인 광분산에는 입사빔의 미세한 파장변화에 따른 PC내에서의 급격한 빛의 꺾임이나, 단일 파장의 입사빔이 두갈래로 갈라지는 현상, 또는 negative나 1보다 작은 굴절효과 등이 있는데, 이러한 현상을 해석하기 위한 것으로 광결정내의 고정된 진동수에 해당하는 점들을 2차원 k공간에서 표시한 분산곡선(dispersion surface)이 도입되었다. [2] (중략)

• Journal of Korean Society of Steel Construction
• /
• v.14 no.1
• /
• pp.59-67
• /
• 2002

The ultimate strength testing of a two-story, single-bay, and sway allowed space steel frame was performed. Considering a majority of large-scale frame tests in the past, only two-dimensional frames were experimentally studied. Therefore, three-dimensional experiment is needed to extend the knowledge of this field. The steel frame subjected to non-proportional vertical and horizontal load was tested. The load-displacement curve of the test frame is provided. The experiment results are useful for verification of the three-dimensional numerical analysis. The results obtained from 3D non-linear analysis using ABAQUS were compared with experimental data.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.575-578
• /
• 2011

We fabricated a novel simple and rapid method of three dimensional nanoporous gold thin film (NPGF) onto a Au substrate using electrochemical deposition method. The NPGF-modified electrode analysis by scanning electron microscope and reveals the formation of nanopores, approximately 30~50 nm in diameter. differential pulse voltammetry was measured for the determination of ${\gamma}$-aminobutiric acid in the concentration range of ($10{\sim}100{\mu}M$ using a NPGF. The high sensitivity feature of NPGF is expected to be applied for real sample biosensor applications.

• Geophysics and Geophysical Exploration
• /
• v.8 no.3
• /
• pp.207-217
• /
• 2005

We present a new approximate formulation of the integral equation (IE) method for models with variable background conductivity. This method overcomes the standard limitation of the conventional If method related to the use of a horizontally layered background only. The new approximate IE method still employs the Green's functions for a horizontally layered 1-D model. However, the new method allows us to use an inhomogeneous background with the IE method. The method was carefully tested for modeling the EM field for complex structures with a known variable background conductivity. It can find wide application in modeling EM data for multiple geological models with some common geoelectrical features, like a known inhomogeneous overburden, or salt dome structures.

• Computational Structural Engineering
• /
• v.5 no.2
• /
• pp.79-85
• /
• 1992

For the structural analysis of optimum form decision of 3-D free form structure such as ship, plane, automobile, definition of versatile forms and comparision between them satisfying the design criterion, is essential. In this paper, 3-D free form structure and it's variation are defined and attempts were made to obtain geometric form information for structural analysis. The validity of the method has been tested for a particular free model selected.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.131-134
• /
• 2001

The three-dimensional precision measurement technology for industry product of middle and/or large scale has been developed. Theodolite measurement system which is one of the technology is widely used in aerospace industry. This paper describes measurement method and results for spacecraft structure test model by using the measurement system. And structural stability for STM is desribed through the comparison between design values and measured values.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1991.04a
• /
• pp.43-47
• /
• 1991

For the structural analysis of optimum form decision of 3-D free fort structure such as ship, plane, automobile, definition of versatile forms and comparision between them satisfying the design criterion, is essential. In this paper, three dimensional free-form structure and it's variation are defined and attempts were made to obtain geometric form information for structural analysis. The validity of the method ks been tested for a particular free-form model selected.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.4
• /
• pp.139-147
• /
• 2019

Lithium-ion battery (LiB) with high energy density and efficiency has been utilized for the electric vehicle (EV) and energy storage system (ESS) as well as portable devices. However, as explosion accidents have frequently happened till lately, all-solid-state lithium secondary battery (ALSB) began to get in a spotlight because it can secure a very high safety and energy density by substituting flammable organic liquid electrolyte to nonflammable inorganic solid electrolyte. In spite of ALSB's certain merits, it has shown much poorer performance of cells than one of LiB due to some challenges, which have been small or never dealt with in the LiB system. Hence, although plenty of studies made progress to solve them, an approach about design of all-solid-state electrode (ASSE) has been limited on account of difficulty of ALSB's experiments. That is why the virtual 3D structure of an all-solid-state electrode has to be built and used for the prediction of cell performance. In this study, we elucidate how to form the 3D ASSE structure and what to be needed for the simulation of characteristics on ALSB. Furthermore, the ultimate orientation of 3D modeling and simulation for the study of ALSB are briefly suggested.