• ETRI Journal
• /
• 제44권5호
• /
• pp.715-732
• /
• 2022

Despite the successful launch of Advanced Television Systems Committee (ATSC) 3.0 broadcasting worldwide, broadcasters are facing obstacles in constructing void-less large-scale single-frequency networks (SFNs). The bottleneck is the absence of decent on-channel repeater (OCR) solutions necessary for SFNs. In the real world, OCRs suffer from the maleficent feedback interference (FI) problem, which overwhelms the desired input signal. Moreover, the undesired multipaths between studio-linked transmitters and the OCR deteriorate the forward signals' quality as well. These problems crucially restrict the feasibility of conventional OCR systems, arousing the strong need for cost-worthy advanced OCR solutions. This paper presents an ATSC 3.0-specific solution of advanced OCR that solves the FI problem and refines the input signal. To this end, the FI canceler and channel equalizer functionalities are carefully implemented into the OCR system. The presented OCR system is designed to be fully compliant with the ATSC 3.0 specifications and performs a fast and efficient signal processing by exploiting the specific frame structure. The real product of ATSC 3.0 OCR is fabricated as well, and its feasibility is verified via field and laboratory experiments. The implemented solution is installed at a commercial on-air site and shown to provide substantial coverage gain in practice.

• 한국정보통신학회논문지
• /
• 제5권3호
• /
• pp.451-458
• /
• 2001

본 연구는 자동차내의 각종 제어장치들을 음성으로 실시간 제어하기 위한 음성제어 시스템을 제안하고 실험적으로 검증하였다. 실시간 제어음성 인식시스템은 8bit-l0MHz로 A/D변환된 음성 데이터를 실시간으로 시작점과 끝점을 검출한 후, One Pass DP법으로 인식하였으며 그 결과를 모니터에 문장으로 출력하며 제어용 인터페이스에 제어데이터를 보내도록 구성하였다. HMM모델은 자동차내의 장치들을 제어하기 위한 제어음성 및 숫자음들로 구성되는 연속음성을 학습 및 모델링 하였다. 단어.제어문들의 인식률은 평균 97.3%, 숫자음의 경우는 평균 96.3% 정도의 인식률을 얻을 수 있었다.

• 대한임베디드공학회논문지
• /
• 제18권1호
• /
• pp.31-40
• /
• 2023

Recent advances in flash technologies, such as 3D processing and multileveling schemes, have successfully increased the flash capacity. Unfortunately, these technology advances significantly degrade flash's reliability due to a smaller cell geometry and a finer-grained cell state control. In this paper, we propose an asymmetric BER-aware reliability optimization technique (aBARO), new flash optimization that improves the flash reliability. To this end, we first reveal that bit errors of 3D NAND flash memory are highly skewed among flash cell states. The proposed aBARO exploits the unique per-state error model in flash cell states by selecting the most error-prone flash states and by forming narrow threshold voltage distributions (for the selected states only). Furthermore, aBARO is applied only when the program time (tPROG) gets shorter when a flash cell becomes aging, thereby keeping the program latency of storage systems unchanged. Our experimental results with real 3D MLC and TLC flash devices show that aBARO can effectively improve flash reliability by mitigating a significant number of bit errors. In addition, aBARO can also reduce the read latency by 40%, on average, by suppressing the read retries.

• 한국인터넷방송통신학회논문지
• /
• 제23권6호
• /
• pp.139-143
• /
• 2023

본 논문에서는 CT영상을 구성하는 RT 알고리즘에 비해 원추형 CB-CT 시스템에서 이용할 수 있는 TPSM 알고리즘을 적용하여 기존의 RT보다 빠르게 3D CT 영상 구성을 할 수 있도록 하였으며 두 개의 알고리즘에 대한 영상속도를 비교분석 하였다. 이를 위하여 원추형 CB-CT 시스템에서 이용할 수 있는 TPSM 알고리즘을 적용하여 3D CT 영상구성에 있어서 실시간 처리가 가능하도록 하였다. 실험결과 TPSM을 이용하여 구성된 단면 영상은 중심점에서 멀어질수록 빈 화소에 의해 영상의 질이 미소하게 감소하지만 TPSM 회전 기반법의 경우에서 영상 구성 속도는 RT알고리즘보다 월등하게 우수하다는 것을 알 수 있었다.

• 한국정보처리학회논문지
• /
• 제7권9호
• /
• pp.2903-2912
• /
• 2000

본 논문은 PKI(Public Key Infrastructure)를 기반으로 기존의 일반 우편과 전자 메일을 통합한 하이브리드 메시징 시스템 설계 및 구현에 관한 것이다. 사용자는 웹 브라우져 상에서 메일을 작성하여 웹서버로 전송하고, CGI(Common Gateway Interface)프로그램은 웹 서버를 통해 받은 메일을 우체국 전자 메일 서버로 SMTP(Simple Mail Transfer Protocol)를 이용하여 전송한다. 관내 우체국에 설치된 하이브리드 메시징 시스템의 후처리 프로그램은 자신의 관내 우체국에서 처리해야할 메일을 POP3(Post Office Protocol 3)프로토콜로 가지고 오고 인쇄한 후 배달한다. 또한 사용자는 인증 기관으로부터 받은 서명 비밀키를 이용하여 전송할 메일을 서명할 수 있으며 우체국 웹서버의 공개키를 이용하여 전송한 메일을 암호화한다.

• Journal of Welding and Joining
• /
• 제26권2호
• /
• pp.92-97
• /
• 2008

In welding of thin plate, some defects such as melt through and unmelted zone occur easily at welding start, however there is a limited study on those problems. Therefore the effects of start block and arc length on melt through and unmelted zone at start were investigated in this study. When start block height was lower than base metal, there was melt through at start. And when the height was even with base metal, no unmelted zone existed. Unmelted zone was increased as start block height increased from 0mm to 0.5mm. However unmelted zone was not much changed as the height increasing from 0.5mm to 1.0mm. When gap existed between start block and base metal, melt through occurred. However, unmelted zone was increased as the contact force of start block on base metal was increased from 0kgf to 7.5kgf. And when arc length was decreased from 3.8mm to 3.0mm, unmelted zone was decreased. It was concluded that the optimum condition to prevent melt through and to minimize unmelted zone would be with start block height 0.25mm, contact force 3.0kgf, and arc length 3.4mm. This optimum condition was applied to the mass production line and resulted in satisfied outcome.

• 정보처리학회논문지D
• /
• 제11D권3호
• /
• pp.709-716
• /
• 2004

본 논문에서는 다중 시계열 패턴인식 사용하여 생산장치의 상태자료부터 공정결과를 예측하여 정상 또는 비정상을 판정하는 지능형 감시시스템에 관하여 기술한다. 제안하는 감시스템은 초기화, 학습 그리고 인식의 세 단계로 구성된다. 초기화 단계에서는 감시대상의 생산장치가 가지는 인사들 각각의 가중치와 각 인자들이 가지는 시계열 자료 중에서 학습과 인식에 유효단계를 설정한다. 학습단계에서는 LBG알고리즘을 사용하여 이 생산장치에 의하여 생성되고 수집된 패턴들을 군집화 한다. 각 패턴은 시계열 형태의 자료와 처리 완료 후 계측기에 의하여 측정된 ACI로 구성된다. 인식단계에서는 DTW를 사용하여 실시간으로 입력된 패턴과 군집화된 패턴들 사이의 대응을 수행하여 가장 잘 정합되는 패턴을 찾는다. 다음은 이 패턴이 가지는 ACI, 차 그리고 가중치들의 조합으로 예측된 ACI 값을 산출한다. 최종적으로 예측된 ACI가 정상으로 수용할 수 있는 값 범위에 없는지 여부를 결정한다. 제안하는 시스템의 성능평가를 위하여 식각장치로부터 획득된 자료를 대상으로 실험하였다. 실험결과에서는 학습횟수가 증가함에 따라 예측 ACI값과 실측ACI값 사이의 오차가 현저히 감소함을 볼 수 있다

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.417-422
• /
• 2003

The KOMPSAT-2 MSC(Multi-Spectral Camera), with high spatial resolution, is currently under development and will be launched in the end of 2004. A sensor model relates a 3-D ground position to the corresponding 2-D image position and describes the imaging geometry that is necessary to reconstruct the physical imaging process. The Rational Function Model (RFM) has been considered as a generic sensor model. form. The RFM is technically applicable to all types of sensors such as frame, pushbroom, whiskbroom and SAR etc. With the increasing availability of the new generation imaging sensors, accurate and fast rectification of digital imagery using a generic sensor model becomes of great interest to the user community. This paper describes the procedure to generation of the RPC (Rational Polynomial Coefficients) for KOMPSAT-2 MSC.

• Architectural research
• /
• 제7권2호
• /
• pp.23-33
• /
• 2005

The use of computers in architectural professions has grown with the power of easy data management, increased sophistication of standalone applications, inexpensive hardware, improved speed of processing, use of standard library and tools for communication and collaboration. Recently, there has been a growing interest in distributed CAAD (Computer-Aided Architectural Design) integration due to the needs of direct collaboration among project participants in different locations, and Internet is becoming the optimal tool for collaboration among participants in architectural design and construction projects. The aim of this research is to provide a new paradigm for a CAAD system by combining research on integrated CAAD applications with recent collaboration technologies. To accomplish this research objective, interactive three-dimensional (3D) design tools and applications running on the Web have been developed for an Internet-based distributed CAAD application system, specifically designed to meet the requirements of the architectural design process. To this end, two different scopes of implementation are evaluated: first, global architecture and the functionality of a distributed CAAD system; and, second, the association of an architectural application to the system.

• 한국언어정보학회:학술대회논문집
• /
• 한국언어정보학회 2002년도 Language, Information, and Computation Proceedings of The 16th Pacific Asia Conference
• /
• pp.28-35
• /
• 2002

Automatic identification of Chinese personal names in unrestricted texts is a key task in Chinese word segmentation, and can affect other NLP tasks such as word segmentation and information retrieval, if it is not properly addressed. This paper (1) demonstrates the problems of Chinese personal name identification in some If applications, (2) analyzes the structure of Chinese personal names, and (3) further presents the relevant processing strategies. The geographical differences of Chinese personal names between Beijing and Hong Kong are highlighted at the end. It shows that variation in names across different Chinese communities constitutes a critical factor in designing Chinese personal name Identification algorithm.