• 제목/요약/키워드: 2nd phase

검색결과 592건 처리시간 0.021초

램제트 추진 시스템의 동적 제어 모델링 기법(I) (Dynamic Modeling Scheme for Control of the Ramjet Propulsion Systems(I))

  • 김선경;염효원;전창수;성홍계;박익수;이규준
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년도 제30회 춘계학술대회논문집
    • /
    • pp.295-298
    • /
    • 2008
  • 램제트 추진 시스템 제어를 위한 모델링 기법에 대한 연구를 수행하였다. 연료공급시스템은 동적 메커니즘을 묘사하기 위해 전형적인 2차 시스템 모델을 사용하였으며, 이로부터 연료공급시스템의 계단 응답특성을 계산하고 이에 상응되는 연소실 압력섭동과 종말 충격파의 위치 변화 관계를 파악하였다. 압력섭동과 종말 충격파 간의 상관관계를 도출하기 위하여 연소실 압력은 일정한 주기와 진폭을 갖는 사인파로 모델링하여 종말충격파의 거동에서 나타나는 위상차를 확인하였다. 본 연구를 통해 시스템의 작동에 대한 물리적인 이해를 도모하며, 시스템의 동적 특성이 엔진 작동에 미치는 영향을 살펴보았다.

  • PDF

전열침(傳熱鍼)이 급·만성 족관절 염좌로 인한 전거비 인대 손상에 미치는 임상적 효과 (The Clinical Effects of Heating-Conduction Acupuncture Therapy for Anterior Talofibular Ligament Injury Induced by Acute and Chronic Ankle Sprain)

  • 장효길;허동석
    • 한방재활의학과학회지
    • /
    • 제21권4호
    • /
    • pp.181-190
    • /
    • 2011
  • Objectives: The purpose of this study is to investigate the clinical effects of heating-conduction acupuncture therapy on anterior talofibular ligament injury induced by acute and chronic ankle sprain. Methods: From April 19, 2010 to May 30, 2011 the 79 outpatients who had admitted to department of oriental rehabilitation medicine, Dae-Jeon oriental medical hospital, Dae-Jeon university with ankle sprain were performed heating-conduction acupuncture therapy on anterior taIofibular ligament injury. To evaluate the efficiency of heating-conduction acupuncture therapy, pain threshold with pressure algometer and visual analogue scale(VAS) were applied before treatment and after 1st, 2nd treatment. Results: 1. The pain threshold and VAS score showed significant improvement on acute subacute, chronic anterior talofibular ligament injury group. 2. The difference in pain threshold and VAS score between acute, subacute, chronic phase group was not significant. Conclusions: Heating-conduction acupuncture therapy has clinical effects of pan reduction on patient with anterior talofibular ligament injury.

II급 Activator를 이용한 혼합치열기 II급 부정교합아동의 치험례 (TREATMENT OF CLASS II MALOCCLUSION IN THE MIXED DENTITION WITH CLASS II ACTIVATOR: CASE REPORT)

  • 유건정;김현정;남순현;김영진
    • 대한소아치과학회지
    • /
    • 제24권4호
    • /
    • pp.735-742
    • /
    • 1997
  • Class II malocclusion can be treated via early orthopedic, orthodontic treatment or orthognathic surgery with orthodontic treatment. In the mixed dentition, early orthopedic treatment can be used. Especially, in the case of mandibular retrognathism, the functional appliances can be used, and in the case of maxillary protrusion is combined, they can be used together with headgear. After using activator and activator combined with headgear to the class II malocclusion paitent in the mixed dentition, the results were as follows: 1. Lateral profile was improved, and lower face height was increaed. 2. Overjet was decreased, and molar relationship was changed to class I molar relationship. 3. Growth can be undisturbed, and the aggravation of malocclusion can be prevented to make the 2nd phase orthodontic treatment be much easier.

  • PDF

Ca 치환에 따른 (Sr.Ca)$TiO_3$계 세라믹스의 구조적 및 유전 특성 (Structural and Dielectric Properties of (Sr.Ca)$TiO_3$-based Ceramics with the Substitution of Ca)

  • 최운식;강재훈;서용진;김창일;김충혁;박용필
    • 한국전기전자재료학회논문지
    • /
    • 제14권11호
    • /
    • pp.879-884
    • /
    • 2001
  • In this paper, the structural and dielectric properties of (Sr$_{l-x}$Ca$_{x}$)TiO$_3$ (0$\leq$x$\leq$0.2) -based grain boundary layer ceramics were investigated by XRD, SEM and HP4194A. The ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were 1420~152$0^{\circ}C$ and 4 hours, respectively. The average grain size and the lattice constant were decreased with increasing content of Ca. The average grain size was increased with increase of sintering temperature. The relative density of all specimens was 96~98%. The 2nd Phase formed by the thermal diffusion of CuO from the surface leads to very excellent dielectric properties, that is, $\varepsilon$$_{r}$>50000, tan $\delta$<0.05, $\Delta$C<$\pm$10%. The appropriate Ca content was under 15 ㏖%.s under 15 ㏖%.%.

  • PDF

산초 (Zanthoxylum schnifolium)열매 분획물의 대장암세포(HT-29)에 대한 항암 효과 (Anti-cancer Activity of Human Colon Cancer (HT-29) Cell Line from Different Fraction of Zanthoxylum schnifolium Fruits)

  • 한웅;호위성;이영미
    • 생약학회지
    • /
    • 제42권3호
    • /
    • pp.282-287
    • /
    • 2011
  • This study was presented to the anti-cancer activity from different fraction of Zanthoxylum schnifolium fruits. The values for human colon cancer cell(HT-29) survival rate of 0.3 mg/mL of 70% EtOH and 70% MeOH ethyl acetate fraction extracts were 7.62${\pm}$0.173%, 7.66${\pm}$0.037%, respectively. It was shown that human colon cancer cell(HT-29) survival rate was in a dose-dependent manner. The percentages of cells were increased in the sub-G0 and G0/G1 phase region, meaning that cell proliferation was decreased. The RT-PCR demonstrated that 70% EtOH and 70% MeOH ethyl acetate fraction extracts were down-regulated the expression of Bcl-2 and survivin genes in HT-29 cells. We examined that 70% EtOH and 70% MeOH ethyl acetate fraction extracts anti-cancer activities initiated through ROS generation suggesting that HT-29 cells treated with ethyl acetate fraction extracts induced ROS generation. Our results revealed that the Zanthoxylum schnifolium fruit may expect for anti-cancer activities in HT-29 cells.

pH에 따른 무전해Ni-P-PTFE 복합도금의 표면형상 및 내식성에 대한 특성 연구 (Characterization of the Morphology and Corrosion Resistance in Electroless Ni-P-PTFE Composite Coating Prepared by Different pH Value)

  • 변영민;서선교;윤진두;나상조;류창환;황환일
    • 한국표면공학회지
    • /
    • 제52권3호
    • /
    • pp.156-162
    • /
    • 2019
  • Electroless Ni-P coatings are widely used in the chemical, mechanical, and electronic industries because of their excellent wear and abrasion resistance. In this study, The influence of pH values on properties of Ni-P-PTFE composite coatings was investigated. To improve mold lubrication, Ni-P-PTFE composite coatings at different pH value were studied. The morphology and phase structure of Ni-P-PTFE composite coatings were analyzed by scanning electron microscopy(SEM) and X-ray diffractometry(XRD). The result showed that Ni-P-PTFE composite coating is composed of Ni, P and PTFE. It exhibits an amorphous structure and good Corrosion Resistance to the substrate. Ni-P-PTFE composite coatings have higher open circuit potential than that of the substrate, which obtained at pH value of 5.0 optimal integrated properties.

TSSG 법으로 육성한 $LiB_3O_5 $ 단결정의 제2조화파 발생 특성 (Characteristics of Second Harmonic Generation in $LiB_3O_5 $ Crystals Grown by TSSG Method)

  • 권택용;오학태;주정진;백현호;김정남;윤수인
    • 한국광학회지
    • /
    • 제5권1호
    • /
    • pp.74-79
    • /
    • 1994
  • 이 연구에서는 TSSG 법으로 육성한 LiB3O5(LBO) 단결정의 1064nm 광에 대한 type I 및 type II 제 2 조화파 발생(SHG) 특성을 조사하였다. Type I SHG의 위상정합각은 $\theta_m=90^{\circ}, \phi_m=11.6^{\circ}$였고 angular acceptance bandwidth는 각각 $\delta\theta_{int}L_{1/2}=3.3^{\circ}-cm^{1/2}, \theta\phi_{int}L=0.27^{\circ}-cm^{1/2}$로 측정되었다. Type II SHG의 위상정합각은 $\theta_m=20^{\circ}, \phi_m=90^{\circ}$였고 angular acceptance bandwidth는 각각 $\delta\theta_{int}L_=0.65^{\circ}-cm, \theta\phi_{int}L^{1/2}=3.5^{\circ}-cm^{1/2}$로 측정되었다. Type I NCPM SHG 온도는 $149^{\circ}C$였고 temperature bandwidth $\DeltaTL$$4.8^{\circ}C-cm$였다. Nd:YAG 레이저의 peak power 가 $171 MW/\textrm{cm}^2$ 일때 두께가 2.6 mm 인 LBO 결정의 SHG 변환효율은 약 1.8%였고, 이차 비선형 계수 $d_{32}는 약 0.74\pm0.05 pm/V$로 측정되었다.

  • PDF

향상된 전력효율을 갖는 GaInP/GaAs HBT 마이크로파 푸쉬-푸쉬 전압조정발진기 (A Microwave Push-Push VCO with Enhanced Power Efficiency in GaInP/GaAs HBT Technology)

  • 김종식;문연국;원광호;신현철
    • 대한전자공학회논문지SD
    • /
    • 제44권9호
    • /
    • pp.71-80
    • /
    • 2007
  • 본 논문은 교차결합된 부성저항(cross-coupled negative-gm) 발진기 구조의 캐패시터 공통단자에서 2차 고조파를 얻어내는 새로운 푸쉬-푸쉬 기술에 대해 제안한다. 캐패시터 공통단자에서 2차 고조파가 생성되는 기본적인 이론은 에미터-베이스 접합 다이오드의 비선형 특성에 의한 Voltage clipping과 VCO core 트랜지스터의 Switching 동작 시 생기는 상승과 하상 시간의 차로써 설명된다. Simulation을 통한 비교연구를 통하여 본 논문에서 제안한 방법이 기존의 에미터 공통단자에서 출력을 얻어내는 방법보다 마이크로파 영역에서 전력효율이 더 뛰어나다는 것을 보였다. 본 기술을 적용한 Prototype MMIC VCO가 12-GHz와 17-GHz 대역에서 GaInP/GaAs HBT 공정을 사용하여 설계, 제작되었다. 출력 파워는 각각 -4.3dBm과 -5dBm이 측정되었고, Phase noise는 1-MHz offset에서 각각 -108 dBc/Hz와 -110.4 dBc/Hz가 측정되어 -175.8 dBc/Hz와 -184.3 dBc/Hz의 FoM(Figure-of-Merit)을 얻었다. 제작된 12-GHz와 17-GHz의 VCO Core는 각각 25.7mW(10.7mA/2.4V)와 13.1mW(4.4mA/3.0V)를 소모한다.

구문관계에 기반한 유전자 상호작용 인식 (Detection of Gene Interactions based on Syntactic Relations)

  • 김미영
    • 정보처리학회논문지B
    • /
    • 제14B권5호
    • /
    • pp.383-390
    • /
    • 2007
  • 단백질이나 유전자들 간의 상호작용 인식은 생물학적 현상의 기술에 있어서 필수적이고, 이러한 상호작용의 네트웍 파악은 생물학 접근의 시작이라고 할 수 있다. 최근에, 대량의 생물학 관련 문서로부터 자연언어처리 기술을 사용하여 이러한 정보를 추출하려는 연구들이 많이 등장했다. 또한 이전 연구들은 언어학적 정보가 문서로부터 유전자 상호작용을 자동으로 추출하는 데 있어서 유용하다고 주장하고 있다. 하지만 기존의 방법들은 정확률에 비해 재현율이 많이 낮아서 성능이 그다지 좋지 못했다. 정확률의 감소 없이 재현율의 성능향상을 위해, 이 논문은 생물학관련 문서에서 구문관계에 기반하여 유전자 상호작용을 인식하는 방법을 제안한다. 생물학 도메인에 관련된 전문지식 없이, 우리의 방법은 단지 적은 양의 학습데이터를 사용하여 효과적인 성능을 보인다. LLL05(ICML05 Workshop on Learning Language in Logic)에서 제공한 데이터 포맷을 그대로 사용하여, 상호작용하는 두 유전자 중 작용의 주체가 되는 유전자를 에이전트라 하고 상호 작용의 대상이 되는 유전자를 타겟이라 한다. 본 논문에서 제안하는 첫 단계에서, 에이전트와 타겟 유전자에 대한 유전자-전이 구문관계를 인식한다. 두 번째 단계에서, 유전자 간의 상호작용이 있음을 암시하는 용언리스트를 구축한다. 마지막 단계에서, 상호작용하는 것으로 인식된 두 유전자 중 어느 것이 에이전트이고 타겟인지를 판단하기 위해 구문관계의 방향 정보를 학습한다. LLL05 데이터를 사용한 실험결과에서, 본 논문에서 제안한 방법이 학습 데이터에 대해서는 88%의 F-measure 성능을 보였고, 테스트 데이터에 대해서는 70.4%의 F-measure 성능을 보였다. 이 결과는 기존의 방법들보다 훨씬 더 좋은 성능이다. 우리는 성능에 대한 각 단계의 공헌도를 실험하여, 첫 단계는 재현율 향상에 기여를 하고 두 번째와 세 번째 단계는 정확률 향상에 기여했음을 보인다.

중부 옥천대의 지구조 발달과정 (Tectonic evolution of the Central Ogcheon Belt, Korea)

  • 강지훈;;류충렬
    • 암석학회지
    • /
    • 제21권2호
    • /
    • pp.129-150
    • /
    • 2012
  • 본 논문에서는 옥천, 청산, 문경 부운령, 부산 지역에서 작성된 암상구분에 의한 상세한 지질도, 변형단계별 지질구조와 미구조, 변형작용과 변성작용 사이의 상대적 시간관계 등에 대한 종합적인 연구결과와 옥천누층군에서 최근까지 보고된 절대 및 화석 연대자료로부터 중부 옥천대의 지구조 발달과정을 새롭게 고찰해 보았다. 첫 번째 지구조운동($D^*$)은 원경기육괴를 북부 경기육괴(현재의 경기육괴)와 남부 경기육괴(부산 및 박달령 편마암복합체)로 분리시키는 열곡작용에 의해 특징 지워진다. 전기 고생대 동안에는 조선누층군과 이에 상응하는 옥천누층군의 하위층군(석영사질암, 이질암, 탄산염질암, 염기성질암)이 옥천열곡분지에 퇴적 및 분출 관입되었고, 후기 고생대 동안에는 평안누층군과 이에 상응하는 옥천누층군의 상위층군(역질암, 이질암, 산성질암)이 퇴적 및 분출 관입되었다. 두 번째 지구조운동(옥천-청산 지구조운동/송림조산운동: D1)은 후기 페름기~중기 트라이아스기 동안에 발생하였고, D1은 전기단계의 옥천 아지구조운동(D1a)과 후기단계의 청산 아지구조운동(D1b)으로 구분된다. D1a는 북부 경기육괴와 남부 경기육괴의 결합 즉 옥천열곡분지의 닫힘운동과 관련하여 발생하였으며, 그 초기단계에는 옥천누층군에 조립흑운모, 석류석, 십자석 등 중압형 변성광물의 성장과 관련된 M1 중압형 변성작용을 발생시켰고 그 후기단계에는 옥천 중압형 변성암류를 남동-버젼스의 몇몇 나쁘로서 발굴시켰다. 그 결과 옥천변성대에서는 남동-버젼스의 지구조단위들이 형성되고 옥천누층군에는 이에 수반되어 대규모 칼집습곡, 광역엽리, 신장선구조가 형성되었다. D1b는 (북)북동-(남)남서의 압축지구조 환경하에서 발생하여 남중국판(경기육괴와 옥천변성대)과 북중국판(영남육괴와 태백산대)을 결합시켰다. 주요 지질구조로는 결합부의 선단부와 후미부에 (북)북동-버젼스 내지 (남)남서-버젼스를 갖는 (서)북서 방향의 충상단층이 형성되고, 결합부의 측면부에는 북북동 방향의 우수 주향-이동성 청산전단대와 조선 및 평안누층군에 북북동 방향의 직립습곡이 형성되었으며, 한반도에는 대동분지가 형성되었다. 그 이후, 후기 트라이아스기~전기 쥬라기의 대동층군이 퇴적되고, 세 번째 지구조운동(호남 지구조운동/대보조산운동: D2)은 전기~후기 쥬라기 동안에 북북동 방향의 우수 주향-이동성 호남전단운동의 횡압축응력 지구조환경하에서 발생하여 옥천누층군에 비대칭 파랑습곡과 조선 및 평안누층군에 북북동 방향의 횡와습곡과 후기 트라이아기 이전의 지층군이 대동층군의 상부로 충상하는 동남동-버젼스의 충상단층을 형성시켰다. M2 홍주석-규선석형 접촉변성작용은 D2의 휴식기에 해당하는 중기 쥬라기에 대보 화강암류의 관입에 의해 발생하였다. 네 번째 지구조운동(청마리 지구조운동: D3)은 전기 백악기에 남-북 방향의 압축지구조 환경하에서 발생하여 북북동 방향의 좌수 주향-이동성 전단운동에 수반된 당겨-열림형 백악기 퇴적분지를 형성시켰다. M3 후퇴변성작용은 주로 D2 이후에 발생하여 옥천누층군에 녹니석 반상변정을 결정시켰다. D3 이후 옥천지역에서는 기생 킹크습곡과 함께 대규모 금강 끌림습곡을 수반하는 좌수향 금강단층운동(금강 지구조운동: D4)이 발생하였고 이들 킹크습곡은 후기 백악기의 산성 암맥에 의해 관입된다.