• Membrane and Water Treatment
• /
• 제11권2호
• /
• pp.123-130
• /
• 2020

Submerged Membrane bioreactor (SMBR) is one of the last techniques that allow a high quality of treated industrial effluents by coupling biological treatment and membrane separation. Thus, this research was an effort to evaluate performance of a SMBR treating a model textile wastewater (MTWW). Different SMBR operating parameters like mixed liquor suspended solids (MLSS) and Dissolved oxygen concentration, hydraulic retention time (HRT), and nutrients addition (N and P) have been investigated. MTWW (influent to the SMBR) was generated using the reactive azo-dye, Novacron blue FNG (100mg/L feed concentration). Results of MTWW treatment using SMBR under optimal operating conditions (MLSS, 4.2-13.3g/L; HRT, 4 days; pH, 6.9-7.2; conductivity, 400-900 μS/cm and temperature, 19.4-22.2 ℃) showed that COD and blue colour treatment performances are between 94-98% and 30-80%, respectively. It is concluded that SMBR can be used in large scale textile wastewater treatment plants to improve effluent quality in order to meet effluent discharge standards.

• Journal of Veterinary Science
• /
• 제23권2호
• /
• pp.18.1-18.10
• /
• 2022

Background: Canine herpesvirus type 1 (CaHV-1) infects dogs and is associated with neonatal deaths and reproductive, ocular, neurological, and respiratory problems. In Brazil, reports of CaHV-1 have been restricted to the southeast and south regions, particularly in municipalities in the state of Rio Grande do Sul. Objectives: To assess the presence and variability of CaHV-1 in canine populations in the state of Pará, North Brazil. Methods: Biological samples from 159 dogs from 4 municipalities in the State of Pará were evaluated using polymerase chain reaction and phylogenetic analyses, with the target being the viral enzyme, thymidine kinase. Results: CaHV-1 was detected in 13 dogs (8.2%), with 2 animals being from the municipality of Santa Bárbara do Pará, 8 from Algodoal Island, 2 from Salinópolis, and one from Capanema. The study sequences revealed 100% identity among themselves and 64% to 100% identity with the other nucleotide sequences from Australia, Brazil, United Kingdom, and United States, including 100% identity with the 2002 isolate from Australia. The 1996 isolate from France was grouped in a branch that was different from the sequence of this study. Conclusions: This study presents the first molecular detection of CaHV-1 in dogs from the Amazon region in northern Brazil. The nucleotide identity between the strains and cytosine insertion in the sequences isolated in this study suggests at least 2 strains of CaHV-1 circulating in Brazil (Pará and BTU-1).

• 대한수학회보
• /
• 제53권3호
• /
• pp.885-902
• /
• 2016

In this paper we begin the study of $L_k$-2-type hypersurfaces of a hypersphere ${\mathbb{S}}^{n+1}{\subset}{\mathbb{R}}^{n+2}$ for $k{\geq}1$ Let ${\psi}:M^3{\rightarrow}{\mathbb{S}}^4$ be an orientable $H_k$-hypersurface, which is not an open portion of a hypersphere. Then $M^3$ is of $L_k$-2-type if and only if $M^3$ is a Clifford tori ${\mathbb{S}}^1(r_1){\times}{\mathbb{S}}^2(r_2)$, $r^2_1+r^2_2=1$, for appropriate radii, or a tube $T^r(V^2)$ of appropriate constant radius r around the Veronese embedding of the real projective plane ${\mathbb{R}}P^2({\sqrt{3}})$.

• Journal of Microbiology and Biotechnology
• /
• 제25권1호
• /
• pp.57-65
• /
• 2015

β-Glucosidase production by the white rot fungus Flammulina velutipes CFK 3111 was evaluated using different carbon and nitrogen sources under submerged fermentation. Maximal extracellular enzyme production was 1.6 U/ml, corresponding to a culture grown in sucrose 40 g/land asparagine 10 g/l. High production yield was also obtained with glucose 10 g/land asparagine 4 g/l medium (0.5 U/ml). Parameters affecting the enzyme activity were studied using p-nitrophenyl-β-_D-glucopyranoside as the substrate. Optimal activity was found at 50℃ and pHs 5.0 to 6.0. Under these conditions, β-glucosidase retained 25% of its initial activity after 12 h of incubation and exhibited a half-life of 5 h. The addition of MgCl₂, urea, and ethanol enhanced the β-glucosidase activity up to 47%, whereas FeCl₂, CuSO₄, Cd(NO₃)₂, and cetyltrimethylammonium bromide inflicted a strong inhibitory effect. Glucose and cellobiose also showed an inhibitory effect on the β-glucosidase activity in a concentration-dependent manner. The enzyme had an estimated molecular mass of 75 kDa. To the best of our knowledge, F. velutipes CFK 3111 β-glucosidase production is amongst the highest reported to date, in a basidiomycetous fungus.

• Journal of Microbiology and Biotechnology
• /
• 제16권5호
• /
• pp.689-694
• /
• 2006

We investigated the potential use of various carbon sources (fructose, glucose, mannose, lactose, and glycerol) for culturing Phaeodactylum tricornutum UTEX-640 in mixotrophic and heterotrophic batch cultures. Concentrations of carbon substrates tested ranged from 0.005 M to 0.2 M. P. tricornutum did not grow heterotrophically on any of the C-sources used, but successive additions of organic carbon in mixotrophic growth mode substantially increased the biomass concentration and productivity relative to photoautotrophic controls. The maximum biomass productivities in mixotrophic cultures for glycerol, fructose, and glucose were 21.30 mg/l h, 15.80 mg/l h, and 10.20 mg/l h, respectively. These values were respectively 10-, 8-, and 5-fold higher than those obtained in the corresponding photoautotrophic control cultures. Mannose and lactose did not significantly affect microalgal growth. The biomass lipids, eicosapentaenoic acid (EPA) and pigments contents were considerably enhanced with glycerol and fructose in relation to photoautotrophic controls. The EPA content was barely affected by the sugars, but were more than 2-fold higher in glycerol-fed cultures than in photoautotrophic controls.

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1445-1453
• /
• 2013

$Zn_{(1-x)}Ni_xAl_2O_4$ (x = 0.0-1.0) spinels were prepared at $800^{\circ}C$ by co-precipitation method and characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy and X-ray photoelectron spectroscopy. The specific surface area was determined by BET. SEM image showed nano sized spherical particles. XPS confirmed the valence states of the metals, showing moderate Lewis character for the surface of materials. The powders were successfully used as new heterogeneous catalysts of Biginelli's reaction, a one-pot three-component reaction, leading to some dihydropyrimidinones (DHPMs). These new catalysts that produced good yields of DHPMs, were easily recovered by simple filtration and subsequently reused with persistent activity, and they are non-toxic and environmentally friendly. The optimum amount of catalyst is 20% by weight of benzaldehyde derivatives, while the doping amount has been found optimal for x = 0.1.

• Structural Engineering and Mechanics
• /
• 제56권2호
• /
• pp.223-240
• /
• 2015

In this work, a nonlocal quasi-3D trigonometric plate theory for micro/nanoscale plates is proposed. In order to introduce the size influences, the Eringen's nonlocal elasticity theory is utilized. In addition, the theory considers both shear deformation and thickness stretching effects by a trigonometric variation of all displacements within the thickness, and respects the stress-free boundary conditions on the top and bottom surfaces of the plate without considering the shear correction factor. The advantage of this theory is that, in addition to considering the small scale and thickness stretching effects (${\varepsilon}_z{\neq}0$), the displacement field is modelled with only 5 unknowns as the first order shear deformation theory (FSDT). Analytical solutions for vibration of simply supported micro/nanoscale plates are illustrated, and the computed results are compared with the available solutions in the literature and finite element model using ABAQUS software package. The influences of the nonlocal parameter, shear deformation and thickness stretching on the vibration behaviors of the micro/nanoscale plates are examined.

• International Journal of Advanced Culture Technology
• /
• 제11권2호
• /
• pp.36-43
• /
• 2023

This study aims to derive discourse's linguistic meaning, production method, and social practice implications by analyzing news reports on de-facility for people with disabilities. To this end, the discourse was analyzed by applying Fairclough's framework of critical discourse analysis. The subject of analysis is a news article on the de-facility of the disabled on the N portal site, and the analysis period is one year, from January 1 to December 31, 2022. First, as a result of the study, the surface meaning of the news discourse on the de-facility for disabled people was ideological through the seriousness of the problem for disabled people, the poor environment, and the policy of de-facility for disabled people separated from reality. Second, the social meaning of the de-facility news discourse for disabled people appeared from a realistic perspective, such as the structural cause of the problem for disabled people and the need for sensible government policies and measures to practice de-facility for disabled people. Finally, the socio-cultural practical implications of the de-facility news discourse for people with disabilities proposed the development of a systematic and realistic de-facility management manual for the disabled, practical government policy support, and changes in self-support perception for disabled people. The results of this study are expected to help find an alternative direction to reduce the gap between actual policies for de-facility for disabled people and practice in the field in the future.

• The Journal of Advanced Prosthodontics
• /
• 제16권2호
• /
• pp.126-138
• /
• 2024

PURPOSE. The aim of this study was to evaluate the influence of different 3D dental resins, using a manufacturer recommended printer and a third-party printer, on cellular responses of human gingival cells. MATERIALS AND METHODS. Three NextDent resins (Denture 3D+, C&B MFH and Crowntec) were used to produce specimens on printers NextDent 5100 (groups ND, NC and NT, respectively) and Phrozen Sonic Mini 4K (groups PD, PC and PT, respectively). Human gingival fibroblasts were cultured and biocompatibility was evaluated on days 1, 3 and 7. IL-6 and IL-8 concentrations were evaluated at 3 days using ELISA. Surface roughness was evaluated by a contact profilometer. SEM and fluorescence micrographs were analyzed at days 1 and 7. Statistical analyses were performed using SPSS and mean differences were tested using ANOVA and post-hoc Tukey tests (P < .05). RESULTS. There was an increase in cellular viability after 7 days in groups PC and PT, when compared to group PD. ND group resulted in higher concentration of IL-6 when compared to PT group. SEM and fluorescence micrographs showed less adhesion and thinner morphology of fibroblasts from group PD. No significant differences were found regarding surface roughness. CONCLUSION. The use of different printers or resins did not seem to influence surface roughness. NextDent 5100 and Phrozen Sonic Mini 4K produced resins with similar cellular responses in human gingival fibroblasts. However, Denture 3D+ resin resulted in significantly lower biocompatibility, when compared to C&B MFH and Crowntec resins. Further testing is required to support its long-term use, required for complete dentures.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.116.2-116.2
• /
• 2007