• Steel and Composite Structures
• /
• v.33 no.5
• /
• pp.699-716
• /
• 2019

In this paper, wave propagations in sigmoid functionally graded (S-FG) plates are studied using new Higher Shear Deformation Theory (HSDT) based on two-dimensional (2D) elasticity theory. The current higher order theory has only four unknowns, which mean that few numbers of unknowns, compared with first shear deformations and others higher shear deformations theories and without needing shear corrector. The material properties of sigmoid functionally graded are assumed to vary through thickness according sigmoid model. The S-FG plates are supposed to be imperfect, which means that they have a porous distribution (even and uneven) through the thickness of these plates. The governing equations of S-FG plates are derived employed Hamilton's principle. Using technique of Navier, differential equations of S-FG in terms displacements are solved. Extensive results are presented to check the efficient of present methods to predict wave dispersion and velocity wave in S-FG plates.

• Wind and Structures
• /
• v.25 no.2
• /
• pp.131-156
• /
• 2017

This paper deals with the dynamic stability of embedded functionally graded (FG)-carbon nanotubes (CNTs)-reinforced micro cylindrical shells. The structure is subjected to harmonic non-uniform temperature distribution and 2D magnetic field. The CNT reinforcement is either uniformly distributed or FG along the thickness direction where the effective properties of nano-composite structure are estimated through Mixture low. The viscoelastic properties of structure are captured based on the Kelvin-Voigt theory. The surrounding viscoelastic medium is considered nonhomogeneous with the spring, orthotropic shear and damper constants. The material properties of cylindrical shell and the viscoelastic medium constants are assumed temperature-dependent. The first order shear deformation theory (FSDT) or Mindlin theory in conjunction with Hamilton's principle is utilized for deriving the motion equations where the size effects are considered based on Eringen's nonlocal theory. Based on differential quadrature (DQ) and Bolotin methods, the dynamic instability region (DIR) of structure is obtained for different boundary conditions. The effects of different parameters such as volume percent and distribution type of CNTs, mode number, viscoelastic medium type, temperature, boundary conditions, magnetic field, nonlocal parameter and structural damping constant are shown on the DIR of system. Numerical results indicate that the FGX distribution of CNTs is better than other considered cases. In addition, considering structural damping of system reduces the resonance frequency.

• Steel and Composite Structures
• /
• v.24 no.5
• /
• pp.579-589
• /
• 2017

The objective of this work is to analyze post-buckling of functionally graded (FG) beams with porosity effect under compression load. Material properties of the beam change in the thickness direction according to power-law distributions with different porosity models. It is known that post-buckling problems are geometrically nonlinear problems. In the nonlinear kinematic model of the beam, total Lagrangian finite element model of two dimensional (2-D) continuum is used in conjunction with the Newton-Raphson method. In the study, the effects of material distribution, porosity parameters, compression loads on the post-buckling behavior of FG beams are investigated and discussed with porosity effects. Also, the effects of the different porosity models on the FG beams are investigated in post-buckling case.

• Annual Conference of KIPS
• /
• 2002.04a
• /
• pp.795-798
• /
• 2002

본 논문에서는 MPEG-4 표준에서 채택된 FGS(Fine Granualrity Scalability)를 이용한 계층적 비디오 부호화 방법을 적용하였다. MPEG-4 FGS는 인터넷에서 이용되는 다양한 특성의 단말기들과 대역폭 변통에서 유연성 있는 기술이다. 적용된 MPEG-4 FGS 기술은 DCT 기반 비트 평면 부호화를 이용한다. 실험에서는 일반적인 SNR 계층 비디오 코딩(Multi-layered SNR scalable video coding)과의 비교를 통해 FGS의 효율성을 평가한다. 비교는 두 부호화 기술의 PSNR 값의 분석을 가지고 이루어졌고 MPEG-4 FGS 기술이 이전의 다층 SNR계층 비디오 부호화 방법보다 평균 $1\sim2dB$ 정도의 높은 값으로 나타났다. 이를 동해 MPEG-4 FGS가 효율성면에서 다층 SNR계층 비디오 부호화 방법보다 우수함을 알 수 있지만, 단일 계층부호화(Single-layered scalable video coding)에 비해서는 효율성이 낮게 나타났다.

• Geomechanics and Engineering
• /
• v.24 no.6
• /
• pp.545-557
• /
• 2021

Since the functionally graded materials (FGMs) are used extensively as thermal barriers in many of applications. Therefore, the current article focuses on studying and presenting dynamic responses of multilayer functionally graded (FG) deep beams placed in a thermal environment that is not addressed elsewhere. The material properties of each layer are proposed to be temperature-dependent and vary continuously through the height direction based on the Power-Law function. The deep layered beam is exposed to harmonic sinusoidal load and temperature rising. In the modelling of the multilayered FG deep beam, the two-dimensional (2D) plane stress continuum model is used. Equations of motion of deep composite beam with the associated boundary conditions are presented. In the frame of finite element method (FEM), the 2D twelve-node plane element is exploited to discretize the space domain through the length-thickness plane of the beam. In the solution of the dynamic problem, Newmark average acceleration method is used to solve the time domain incrementally. The developed procedure is verified and compared, and an excellent agreement is observed. In numerical examples, effects of graduation parameter, geometrical dimension and stacking sequence of layers on the time response of deep multilayer FG beams are investigated with temperature effects.

• Korean Journal of Plant Resources
• /
• v.22 no.2
• /
• pp.116-122
• /
• 2009

Heteropappus arenarius Kitam., an autumn-flowering biennial belonging to wild chrysanthemums, is found to be native in southeastern coastal area and Jeju island of Korea. It could play a good role for ground cover plants on a large-scale landscape area, especially, barren soil or sloping hillside. This study was initiated to screen optimum germination temperature influenced by local strain and harvesting stage of H. arenarius. The following was the response of seed germination between local strain and temperature. The average of final germination percentage (FG) was the highest in 'Guryongpo' (89.7%) among four local strains, followed by 'Gujwa' (87.3%), 'Gampo' (87.3%), and 'HKNU-I' (71.5%). The average of $T_{50}$ was shorter in 'Gujwa' (3.6 d) and 'Guryongpo' (4.0 d) than the others. The average of FG and $T_{50}$ was the highest as 76.2% and shortest as 3.6 d in $20^{\circ}C$, respectively, followed by $30^{\circ}C$, $25^{\circ}C$, and $15^{\circ}C$. In case of 'Gujwa', however, FG and T50 was higher in $20^{\circ}C$ and shorter in $15^{\circ}C$ than others. In the relationship between harvesting stage and temperature, the average of FG was greatly higher in Stage III (90.7%) and Stage IV (88.6%) than the others including Stage II (35.7%) and Stage I (26.0%). The average of $T_{50}$ was shorter in Stage IV (3.7 d) and Stage III (4.3 d) than the others, which showed less than 50% of FG. Nevertheless, the available range of seed harvesting stage was from Stage I to Stage IV because H. arenarius seeds could germinate at all stages. In conclusion, it was recommended that the optimum temperature and harvesting stage was $20^{\circ}C$ and Stage $III{\sim}IV$, respectively, for seed germination of H. arenarius.

• Smart Structures and Systems
• /
• v.19 no.2
• /
• pp.115-126
• /
• 2017

In this paper, size dependent bending and free flexural vibration behaviors of functionally graded (FG) nanobeams are investigated using a nonlocal quasi-3D theory in which both shear deformation and thickness stretching effects are introduced. The nonlocal elastic behavior is described by the differential constitutive model of Eringen, which enables the present model to become effective in the analysis and design of nanostructures. The present theory incorporates the length scale parameter (nonlocal parameter) which can capture the small scale effect, and furthermore accounts for both shear deformation and thickness stretching effects by virtue of a hyperbolic variation of all displacements through the thickness without using shear correction factor. The material properties of FG nanobeams are assumed to vary through the thickness according to a power law. The neutral surface position for such FG nanobeams is determined and the present theory based on exact neutral surface position is employed here. The governing equations are derived using the principal of minimum total potential energy. The effects of nonlocal parameter, aspect ratio and various material compositions on the static and dynamic responses of the FG nanobeam are discussed in detail. A detailed numerical study is carried out to examine the effect of material gradient index, the nonlocal parameter, the beam aspect ratio on the global response of the FG nanobeam. These findings are important in mechanical design considerations of devices that use carbon nanotubes.

• Structural Engineering and Mechanics
• /
• v.66 no.1
• /
• pp.85-96
• /
• 2018

This study investigates the response of functionally graded (FG) gas pipe under unsteady internal pressure and temperature. The pipe is proposed to be manufactured from FGMs rather than custom carbon steel, to reduce the erosion, corrosion, pressure surge and temperature variation effects caused by conveying of gases. The distribution of material graduations are obeying power and sigmoidal functions varying with the pipe thickness. The sigmoidal distribution is proposed for the 1st time in analysis of FG pipe structure. A Two-dimensional (2D) plane strain problem is proposed to model the pipe cross-section. The Fourier law is applied to describe the heat flux and temperature variation through the pipe thickness. The time variation of internal pressure is described by using exponential-harmonic function. The proposed problem is solved numerically by a two-dimensional (2D) plane strain finite element ABAQUS software. Nine-node isoparametric element is selected. The proposed model is verified with published results. The effects of material graduation, material function, temperature and internal pressures on the response of FG gas pipe are investigated. The coupled temperature and displacement FEM solution is used to find a solution for the stress displacement and temperature fields simultaneously because the thermal and mechanical solutions affected greatly by each other. The obtained results present the applicability of alternative FGM materials rather than classical A106Gr.B steel. According to proposed model and numerical results, the FGM pipe is more effective in natural gas application, especially in eliminating the corrosion, erosion and reduction of stresses.

• Advances in concrete construction
• /
• v.14 no.3
• /
• pp.169-183
• /
• 2022

In this article, vibrational behavior and wave propagation characteristics in (FG) functionally graded plates resting on Kerr foundation with three parameters is studied using a 2D dimensional (HSDT) higher shear deformation theory. The new 2D higher shear deformation theory has only four variables in field's displacement, which means has few numbers of unknowns compared with others theories. The shape function used in this theory satisfies the nullity conditions of the shear stresses on the two surfaces of the FG plate without using shear correction factors. The FG plates are considered to rest on the Kerr layer, which is interconnected with a Pasternak-Kerr shear layer. The FG plate is materially inhomogeneous. The material properties are supposed to vary smoothly according to the thickness of the plate by a Voigt's power mixing law of the volume fraction. The equations of motion due to the dynamics of the plate resting on a three-parameter foundation are derived using the principle of minimization of energies; which are then solved analytically by the Navier technique to find the vibratory characteristics of a simply supported plate, and the wave propagation results are derived by using the dispersion relations. Perceivable numerical results are fulfilled to evaluate the vibratory and the wave propagation characteristics in functionally graded plates and some parameters such wave number, thickness ratio, power index and foundation parameters are discussed in detail.

• Steel and Composite Structures
• /
• v.44 no.2
• /
• pp.171-181
• /
• 2022

Functionally graded material (FGM) has been spotlighted as an advanced composite material due to its excellent thermo-mechanical performance. And the buckling of FGM resting on elastic foundations has been a challenging subject because its behavior is directly connected to the structural safety. In this context, this paper is concerned with a numerical buckling analysis of metal-ceramic FG plates resting on a two-parameter (Pasternak-type) elastic foundation. The buckling problem is formulated based on the neutral surface and the (1,1,0) hierarchical model, and it is numerically approximated by 2-D natural element method (NEM) which provides a high accuracy even for coarse grid. The derived eigenvalue equations are solved by employing Lanczos and Jacobi algorithms. The numerical results are compared with the reference solutions through the benchmark test, from which the reliability of present numerical method has been verified. Using the developed numerical method, the critical buckling loads of metal-ceramic FG plates are parametrically investigated with respect to the major design parameters.