• 제목/요약/키워드: 27.12 MHz

검색결과 61건 처리시간 0.033초

$Cr_2O_3$가 탄성 표면파 필터용 PSS-PZT계 압전 세라믹스에 미치는 영향 (Effects of $Cr_2O_3$ Addition in PSS-PZT Piezoelectric Ceramics for Surface Acoustic Wave Filter)

  • 홍재일;손은영;박창엽
    • 대한전기학회논문지
    • /
    • 제41권5호
    • /
    • pp.502-507
    • /
    • 1992
  • To improve temperature stability, 0.05Pb(SnS11/2TSbS11/2T)OS13T-0.35PbTiOS13T-0.60PbZrOS13T+0.4[wt%]MnO S12T piezoelectic ceramics were manufactured with the addition of CrS12TOS13T by Hot Press method. And the SAW delay line was fabricated and effects of CrS12TOS13T to the propagation characteristics of SAW was investigated, and the SAW filter was fabricated on C4 specimen added by 0.2[wt%] CrS12TOS13T whose propagation characteriatics of surface acoustic wave were the bast and its frequency characteristics was investigated. Electromechancal coupling factor(kS1sTS02T) was 3.11[%] and its temperature coefficient of the center frequency(CS1foT)was -21.27[ppm/$^{\circ}C$] in C4. The 31[MHz]]SAW IF filter of C4 scarcely had diffraction phenomena and therefore it was proper.

  • PDF

이중 완전 Shuffle을 이용한 Radix-4 FFT 프로세서의 설계 (Design of Radix-4 FFT Processor Using Twice Perfect Shuffle)

  • 황명하;황호정
    • 대한전자공학회논문지
    • /
    • 제27권2호
    • /
    • pp.144-150
    • /
    • 1990
  • 본 논문에서는 레딕스(radix)-2 FFT 알고리듬에 이용하였던 완전 셔플(shuffle)을 확장하여 새로이 얻은 이중 와전 셔플을 적용하여 레딕스-4 FFT 프로세서를 설계하였다. 이 FFT 프로세서는 버터플라이 연산 회로, 입, 출력값과 계수의 번지 발생기, 입, 출력값을 일시 저장하는 레지스터와 제어회로로 구성된다. 또한 입, 출력값과 계수를 저장하기 위해 외부 RAM과 ROM을 필요로 한다. 버터플라이 회로는 12개의 곱셈기와 덧셈기, 뺄셈기, 딜레이 시프트 레지스터(delay shift register)로 되어 있다. 25MHz two phase 클럭으로 동작하는 이 프로세서는 256-절 FFT를 6168 클럭, 즉 247 us 에 계산을 하며 또한, 사용자가 4, 16, 64, 256- 점까지 임의의 점을 선택할 수 있는 유연성을 갖는다. 그리고 2-um 이중 메탈 CMOS 공정을 이용하여 28000 여개의 트랜지스터와 55개의 패트를 $8.0{\times}8.2mm^2$면적에 설계할 수 있었다.

  • PDF

열잡음 보상을 위한 비선형 왜곡제거 모듈 설계 (Non linearity Distortion Cancellation Module Design for Thermal Noise Compensation)

  • 황보창;고영은;방성일
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2005년도 추계종합학술대회
    • /
    • pp.27-30
    • /
    • 2005
  • In this paper, we designed and manufactured the distortion cancellation module which is able to compensate thermal-noise distortion by software The distortion cancellation algorithm not only bring forth system non-linear distortion by input level but also bring compensate component of distortion by thermal to get rid off distortion from now on. After TMS320C6711 DSP to recognize our algorithm, we manufactured the module for every kinds of system To evaluate efficiency of the distortion cancellation module, we designed and manufactured communication system. By measured result, if system output power is -3dBm equally, 12dB of ACLR has improved in 1MHz away from a center frequency, and also gain has increased up to 0.5dB.

  • PDF

DMB 방송서비스에 대한 잠재적 수요특성 분석 (An Analysis of Demand Features for DMB Services)

  • 변상규
    • 전자통신동향분석
    • /
    • 제19권2호통권86호
    • /
    • pp.18-27
    • /
    • 2004
  • 디지털 기술에 기반하여 출현한 DMB 방송서비스는 이동 TV 수신이라는 강력한 경쟁력을 보유하였으며, 아울러 CD 수준의 음질과 문자방송 수신이 가능한 방송 서비스이다. 국내에서는 DMB 서비스 제공을 위하여 방송법 개정이 논의되고 있으며, 2004년에 수도권을 대상으로 TV의 12번 채널(6MHz 대역)에 3개의 지상파 사업자 허가를 준비중에 있다. 또한 위성 DMB 부문에서는 사업자 차원에서 서비스가 준비되고 있다. 지상파 DMB 방송은 무료로 제공되며, 주로 광고 수익 등으로 운영되는 반면 제공되는 채널 수가 한정되어 있다. 그러나 위성 DMB 방송은 지상파에 비해 채널이 다양한 반면 월 일정액의 이용요금을 추가로 징수할 예정이다. DMB 서비스는 방송. 통신 융합시대를 이끌어 갈 주역으로, 방송 .통신 업계의 새로운 성장동력으로 평가받고 있다. 그러므로 DMB 서비스의 성공은 전후방 산업의 활성화를 통해 국민경제 파급효과가 클 것으로 기대된다. 본 논문에서는 DMB 서비스에 대하여 시장에서 요구하는 잠재적인 수요요인을 파악하기 위하여 잠재 소비자 1,000명에 대하여 설문조사를 수행하였다. 이를 통하여 경쟁 서비스에 대하여 DMB 서비스 포지셔닝(positioning)을 시도하였으며, DMB에 대한 홍보활동의 필요성, 콘텐츠에 대한 수용도, 사업자의 초기 시장진입 전략 등을 제안하였다.

Cellular 주파수 대역 2.7-V MMIC SiGe HBT 상향 주파수 혼합기와 가변이득 증폭기의 설계 (Design of A 2.7-V MMIC SiGe HBT Up-converter and Variable Gain Amplifier for Cellular Band Applications)

  • 박성룡;김창우
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
    • /
    • pp.146-149
    • /
    • 2000
  • SiGe HUT뜰 이용하여 Cellular 주파수 대역(824-849 MHz)에서 MMIC 상향 주파수 혼합기와 가변이득 증폭기를 설계하였다. 동작 전압은 2.7 V 이며, 이중평형 구조의 상향 주파수 혼합기는 12 dB의 변환이득, -0.6 dBm의 1dB 이득압축 출력전력, 30 dB 이상의 LO-RF 단자 격리도 특성, 1.25의 LO-VSWR. 1.34의 RF-VSWR을 가지며, 상호컨덕턴스형 가변이득 증폭기는 35 dB의 최대 선형이득, 13 dBm의 1dB 이득압축 출력전력, 42dB의 가변이득, 23dB의 3차 상호변조 교점 출력전력(OIP$_3$), 1.27의 입력 VSWR, 1.1의 출력 VSWR 특성을 보인다.

  • PDF

VLBI Type Experimental Observation of GPS

  • Kwak, Young-Hee;Kondo, Tetsuro;Amagai, Jun;Gotoh, Tadahiro;Sasao, Tetsuo;Cho, Jung-Ho;Kim, Tu-Hwan
    • Journal of Astronomy and Space Sciences
    • /
    • 제27권2호
    • /
    • pp.173-180
    • /
    • 2010
  • As a preparatory study for Global Positioning System-Very Long Baseline Interferometry (GPS-VLBI) hybrid system, we examined if VLBI type observation of the GPS signal is realizable through a test experiment. The test experiment was performed between Kashima and Koganei, Japan, with 110 km baseline. The GPS L1 and L2 signals were received by commercial GPS antennas, down-converted to video-band signals by specially developed GPS down converters, and then sampled by VLBI samplers. The sampled GPS data were recorded as ordinary VLBI data by VLBI recorders. The sampling frequency was 64 MHz and the observation time was 1 minute. The recorded data were correlated by a VLBI correlator. From correlation results, we simultaneously obtained correlation fringes from all 8 satellites above a cut-off elevation which was set to 15 degree. 87.5% of L1 fringes and 12.5% of L2 fringes acquired the Signal to Noise Ratios which are sufficient to achieve the group delay precision of 0.1nsec that is typical in current geodetic VLBI. This result shows that VLBI type observation of GPS satellites will be readily realized in future GPS-VLBI hybrid system.

Pt/LiNbO3/AlN/Si(100) 구조를 이용한 MFIS 커패시터의 전기적 특성 (Electric Properties of MFIS Capacitors using Pt/LiNbO3/AlN/Si(100) Structure)

  • 정순원;김광호
    • 한국전기전자재료학회논문지
    • /
    • 제17권12호
    • /
    • pp.1283-1288
    • /
    • 2004
  • Metal-ferroelectric-insulator-semiconductor(WFIS) capacitors using rapid thermal annealed LiNbO$_3$/AlN/Si(100) structure were fabricated and demonstrated nonvolatile memory operations. The capacitors on highly doped Si wafer showed hysteresis behavior like a butterfly shape due to the ferroelectric nature of the LiNbO$_3$ films. The typical dielectric constant value of LiNbO$_3$ film in the MFIS device was about 27, The gate leakage current density of the MFIS capacitor was 10$^{-9}$ A/cm$^2$ order at the electric field of 500 kV/cm. The typical measured remnant polarization(2P$_{r}$) and coercive filed(Ec) values were about 1.2 $\mu$C/cm$^2$ and 120 kV/cm, respectively The ferroelectric capacitors showed no polarization degradation up to 10$^{11}$ switching cycles when subjected to symmetric bipolar voltage pulses of 1 MHz. The switching charges degraded only by 10 % of their initial values after 4 days at room temperature.e.

해동조건에 따른 냉동마늘의 품질 특성 (Effects of Various Thawing Conditions on Quality Characteristics of Frozen Garlic)

  • 박종우;김진세;박석호;최동수;최승렬;김용훈;이수장;김하윤
    • 동아시아식생활학회지
    • /
    • 제25권5호
    • /
    • pp.893-901
    • /
    • 2015
  • This study investigated the effects of thawing conditions on physiological activities and quality of peeled garlic. Peeled frozen garlic was analyzed after thawing at low temperature ($4^{\circ}C$), room temperature ($20^{\circ}C$), tap water ($20^{\circ}C$), radio frequency of 27.12 MHz, and 2.45 GHz in a microwave. As a result, the time required to thaw garlic to $0^{\circ}C$ by various thawing methods was shortest at2.45 GHz in a microwave, followed by $20^{\circ}C$ tap water, radio frequency of 27.12 MHz, $20^{\circ}C$, and $4^{\circ}C$. Microwave thawing was faster than other methods, but it resulted in significant non-uniformity of heating. The hardness of peeled garlic significantly decreased upon freeze-thawing, whereas it showed improved hardness upon radio-frequency thawing. Total color difference in garlic increased upon freeze-thawing, and it was not improved by various thawing methods. Antioxidant activities were determined for DPPH radical scavenging ability, SOD-like activity, and reducing power. Total phenolic compounds and flavonoids in garlic extract were measured as $3.222{\pm}0.214{\mu}g$ GAE/g and $0.149{\pm}0.03{\mu}g$ QE/g, respectively. The content of total phenolic compounds was significantly reduced by 2.45 GHz microwave thawing ($1.90{\pm}0.02{\mu}g$ GAE/g); however, flavonoid contents were slightly reduced under freezing and thawing conditions. The DPPH radical scavenging ability of garlic extracts was not affected by thawing methods; however, SOD-like activity and reducing power were slightly reduced by freeze-thawing. These results indicate that physiological activities were not improved by radio-frequency thawing; however, thawing time and maintain hardness were reduced compared with conventional thawing methods.

2000년 여름 영산강 하구의 해수 특성과 순환 (Hydrography and Circulation in the Youngsan River Estuary in Summer, 2000)

  • 조양기;조철;선연종;박경양;박래환
    • 한국해양학회지:바다
    • /
    • 제6권4호
    • /
    • pp.218-224
    • /
    • 2001
  • 영산강 하구 내 해수 유동의 시공간적 변화를 이해하기 위하여 해수의 물성과 유속을 종합적으로 관측하였다. 수문 개방으로 많은 양의 담수 유입이 있었던 다음 날인 2000년 7월 27일부터 28일까지 25시간 동안 영산강 하구에서 관측을 실시하였다. 하구 내 12개 정점에서 27일 저조, 28일 고조와 저조때 각각 CTD 관측을 하였고, 하구 내한 정점에서 25시간 동안 수심별 수온과 유속 관측을 실시하였다. 유속은 Acoustic Doppler Profiler(1.5 MHz)를 이용하여 수직적으로 1m 간격으로 측정하였다. 동시에 하구 내 두 정점에서 TGPS 부이를 띄워 표층 해수 유동을 관측하였다. 관측기간은 소조에 해당되며, 조차는 약 4 m, 최대 조류는 약 12 cm/sec였다. 25시간 동안 관측된 유속은대부분의 수층에서 하구를 따라 동서방향으로 반일주조형태의 조류 특성을 잘 보여준다. 그러나 표층의 경우 바람에 의해 유속의 방향이 크게 영향을 받는 것으로 나타났다. 표층 2m이내에 존재하는 22 psu 이하의 저염수는, 관측 초기 남풍에 의해 북쪽 해안선을 따라 관측되었다. 바람의 방향이 동풍으로 바뀜에 따라 표층수는 외해로 흘러나가, 이튿날 관측시에는 하구 내에서 22 psu 이하의 저염수가 발견되지 않았다 유속과 수괴 특성을 분석한 결과일반적인 하구의 수직구조와 달리 본 해역은 수직적으로 네 개의 층으로 나눌 수 있었다. 담수 기원으로 생각되는 표층과 중층의 해수는 25시간 평균 유속이 외해를 향하며, 상층과 하층의 평균 유속은 강쪽을 향하고 있다 이러한 수직 구조는 하구언으로부터 강물의 유입이 불규칙적으로 이루어지기 때문에 발생한 현상이라고 생각된다.

  • PDF

Polymer (Polydimethylsiloxane (pdms)) Microchip Plasma with Electrothermal Vaporization for the Determination of Metal Ions in Aqueous Solution

  • Ryu, Won-Kyung;Kim, Dong-Hoon;Lim, H.B.;Houk, R.S.
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권4호
    • /
    • pp.553-556
    • /
    • 2007
  • We previously reported a 27.12 MHz inductively coupled plasma source at atmospheric pressure for atomic emission spectrometry based on polymer microchip plasma technology. For the PDMS polymer microchip plasma, molecular emission was observed, but no metallic detection was done. In this experiment, a lab-made electrothermal vaporizer (ETV) with tantalum coil was connected to the microchip plasma for aqueous sample introduction to detect metal ions. The electrode geometry of this microchip plasma was redesigned for better stability and easy monitoring of emission. The plasma was operated at an rf power of 30-70 W using argon gas at 300 mL/min. Gas kinetic temperatures between 800-3200 K were obtained by measuring OH emission band. Limits of detection of about 20 ng/mL, 96.1 ng/mL, and 1.01 μ g/mL were obtained for alkali metals, Zn, and Pb, respectively, when 10 μ L samples in 0.1% nitric acid were injected into the ETV.