• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.158-166
• /
• 2017

The object of this study was to improve tomato seedling quality in low temperature(below 7, $10^{\circ}C$ during night time or daily mean air temperature was $18^{\circ}C$) by application of silicate fertilizer. Six different silicate fertilizer concentrations (8, 16, 32, 64, 128, and 256mM) or water as the control were applied to tomato seedlings twice a week for 20 days. Positive effects were observed in the growth parameters of the seedlings treated with 16 and 32mM silicate fertilizer; the most effective concentration of silicate at which seedlings showed the best performance was 16mM. However, a high concentration of silicate (256mM) caused negative effects on the growth. The transpiration rate decreased alongside with the increase of silicate concentration up to 32mM, possibly due to the increased stomatal diffusive resistance. Silicate stimulated the growth and development of tomato seedlings, resulting in increased growth parameters and root morphology. However, no significant differences were observed among treatment numbers of soil-drenching wuth the silicate (6, 10, or 20 times with 16mM) for 20 days, suggesting that silicate treatment with 6 times may be sufficient to induce the silicate effects. The application of 16mM of silicate fertilizer reduced relative ion leakage and chilling injury during low temperature storage. In addition, the seedlings treated with silicate fertilizer recovered faster than those without silicate treatment after low temperature storage.

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.328-333
• /
• 1987

1-eicosylsulfate($C_{20}H_{41}SO_4^-$) was coated onto 5 ${\mu}m$ C18 reversed phase column. Adsorption equilibrium was reached when 1.2l of $1.46{\times}10^{-4}M$ in 25% acetonitrile solution passed through the column. This coated column proved to be stable up to 10l of 0.05 M ${\alpha}$-HiBA eluent used. The column efficiencies of Eu, Nd, Ce and La measured were about 0.04 mm of HETP using 0.15M ${\alpha}$-HiBA eluent at a flow rate of 1.0ml/min. This column was used to separate some lanthanides and transition metal ions, andmshowed an excellent resolution, respectively.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.403-410
• /
• 2015

This study was conducted to analyze the forest environmental characteristics on a total of 20 forest environmental factors affecting the debris flow against 272 sites of risk areas. In the case of environmental factors, it showed the high risk of debris flow under the following conditions such as soil depth of less than 30cm, west slope, altitude of 200~300 m, mountain average slope of $25{\sim}30^{\circ}$, sandy loam, igneous rocks, and composite slope. Among the rainfall factors, 50~100 mm of maximum hourly rain fall and 300 mm of maximum rain fall per day have been shown the high risk of debris flow. Furthermore, the high risk of debris flow was related to the river-bed average slope of $10{\sim}20^{\circ}$, the river-bed average width of >10 m, the small amount of debris in river-bed (less than 20% of river-bed structure), the drainage density of >$1km/km^2$, the 40~60% of area with more than $20^{\circ}$ slope, and the 40~60% of areas with risk grade 2 of landslide. In addition, forest environmental factors including the driftwood, soil erosion control structures, age-class 3, crown density (density), and mixed forest were important factors causing the high risk of debris flow.

• Journal of Gastric Cancer
• /
• v.7 no.2
• /
• pp.59-66
• /
• 2007

Purpose: This study was aimed at evaluating the diagnostic validity of peritoneal dissemination of gastric cancer cells by performing multiple genetic marker analysis via quantitative reverse transcriptase-polymerase chain reaction (RT-PCR) in gastric cancer cell lines and gastric cancer tissues. Materials and Methods: Quantitative RT-PCR was performed on 12 human gastric cancer cell lines and 10 gastric cancer tissues with four mRNAs of carcinoembryonic antigen (CEA), Cytokeratin 20 (CK20), dopa decarboxylase (DDC), and L-3-phosphoserine phosphatase (L3PP). Results: Out of the 12 human gastric cancer cell lines we tested, CEA was overexpressed in four cell lines (33%), CK20 in one (8%), DDC in six (50%) and L3PP was expessed in all the lines (100%). Out of the 10 gastric cancer tissues we tested, CEA was overexpressed in nine tissues, CK20 in eight, DOC in nine and L3PP was overexpressed in all the tissues. L3PP was overexpressed in all the gastric cancer cell lines and tissues, but the levels of overexpression were lower than those of CEA and DDC. Conclusion: Multiple genetic marker analysis can compensate for the weak points of single marker analysis when testing gastric cancer, and three mRNAs of CEA, DDC and L3PP can be used as candidate genes.

• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.754-761
• /
• 2002

It has been reported that the creep characteristics on weldment which is composed of weld metal(W.M), fusion line(F.L), heat-affected zone(HAZ), and base meta(B.M) could be unpredictably changed in severe service conditions such as high temperature and high pressure. However, the studies done on creep damage in power plant components have been mostly conducted on B.M and not the creep properties of the localized microstructures in weldment have been thoroughly investigated yet. In this paper, it is investigated the creep characteristics for three microstructures like coarse-grain HAZ(CGHAZ), W.M, and B.M in X20CrMoV121 steel weldment by the small punch-creep-(SP-Creep) test using miniaturized specimen($10{\times}10{\times}0.5mm$). The W.M microstructure possesses the higher creep resistance and shows lower creep strain rate than the B.M and CGHAZ. In the lower creep load the highest creep strain rate is exhibited in CGHAZ, whereas in the higher creep load the B.M represents the high creep strain rate. The power law correlation for all microstructures exists between creep rate and creep load at $600^{\circ}C$. The values of creep load index (n) based on creep strain rate for B.M, CGHAZ, and W.M are 7.54, 4.23, and 5.06, respectively and CGHAZ which shows coarse grains owing to high welding heat has the lowest creep loade index. In all creep loads, the creep life for W.M shows the highest value.

• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.483-496
• /
• 2008

Qualified ground control points (GCPs) are required to construct a digital elevation model (DEM) from a pushbroom stereo pair. An inverse geolocation algorithm for extracting GCPs from ERS SAR data and the SRTM DEM was recently developed. However, not all GCPs established by this method are accurate enough for direct application to the geometric correction of pushbroom images such as SPOT, IRS, etc, and thus a method for selecting and removing inaccurate points from the sets of GCPs is needed. In this study, we propose a method for evaluating GCP accuracy and winnowing sets of GCPs through orientation modeling of pushbroom image and validate performance of this method using SPOT stereo pair of Daejon City. It has been found that the statistical distribution of GCP positional errors is approximately Gaussian without bias, and that the residual errors estimated by orientation modeling have a linear relationship with the positional errors. Inaccurate GCPs have large positional errors and can be iteratively eliminated by thresholding the residual errors. Forty-one GCPs were initially extracted for the test, with mean the positional error values of 25.6m, 2.5m and -6.1m in the X-, Y- and Z-directions, respectively, and standard deviations of 62.4m, 37.6m and 15.0m. Twenty-one GCPs were eliminated by the proposed method, resulting in the standard deviations of the positional errors of the 20 final GCPs being reduced to 13.9m, 8.5m and 7.5m in the X-, Y- and Z-directions, respectively. Orientation modeling of the SPOT stereo pair was performed using the 20 GCPs, and the model was checked against 15 map-based points. The root mean square errors (RMSEs) of the model were 10.4m, 7.1m and 12.1m in X-, Y- and Z-directions, respectively. A SPOT DEM with a 20m ground resolution was successfully constructed using a automatic matching procedure.

• Korean Journal of Microbiology
• /
• v.14 no.3
• /
• pp.117-127
• /
• 1976

A cellulase fraction (F IV-1) purified to about 8-folds was obtained from crude cellulase prepared from the wheat bran culture of S.atra. The partial purification of the enzyme was made by DEAE Sephadex and Sephdex cloumn chromatography in conjuction with ammonium sulfate precipitation. After stading at various pH's for 22 hours at $20^{\circ}C$, F IV-1 was most stable at pH 5.0 but when the enzyme fraction was stood for 74 hours, the point of pH stability was raised to around pH 6.0-7.0. After heating at various temperatures for 1 hour, F IV-1 was most stable at $20^{\circ}C$. The optimal enzyme activities of F IV-1 were seen at pH 6.0 and $50^{\circ}C$. The optimal concentrations of $Zn^{++}\;and\;Ca^{++}$ for the activities of crude cellulase were 6 and 4 mM respectively, but $Ca^{++}$ inhibited the enzyme activity at concentrations below 2 mM and above 6mM. Both $Cu^{++}\;and\;Mn^{++}$ ions inhibited cellulase activities and a ocmplete inactivation of crude cellulase was achieved at concentratioins of 5 and 2 mM of ions respectively. When Na-CMC was used as substrate, the Km values of crude cellulase and F IV-1 were calculated to be $5{\times}10^{-4}\;and\;2{\times}10^{-5}mM$, and V values 32 and 1.35 mmoles/hour, respectively. The Ki values of $Mn^{++}$ for crude cellulase and F IV-1 were found to be $8{\times}10^{-2}\;and\;3{\times}10^{-2}\;mM\;while\;those\;of\;Cu^{++}\;were\;at\;2{\times}10^{-1}\;and\;1{\times}10^{-1}\;mM\;respectively.\;Both\;Mn^{++}\;and\;Cu^{++}$ showed competitive inhibition with substrate.

• YAKHAK HOEJI
• /
• v.49 no.2
• /
• pp.156-161
• /
• 2005

Tetrahydropapaveroline (THP) at 5-15 ${\mu}$M has been found to induce L-DOPA-induced oxidative apoptosis in PC12 cells. In this study, the inhibitory effects of THP on dopamine bios ynthesis in PC12 cells and tyrosine hydroxylase (TH) activity in bovine adrenal were investigated. Treatment of PC12 cells with THP at 2.5-10 ${\mu}$M significantly decreased the intracellular dopamine content in a concentration-dependent manner (18.3% inhibition at 10 ${\mu}$M THP). In these conditions, TH activity was markedly inhibited by the treatment with THP at 2.5-10 ${\mu}$M in PC12 cells (23.4% inhibition at 10 $\mu$ M THP). In addition, THP had an inhibitory effect on bovine adrenal TH activity IC50 value, 153.9${\mu}$M). THP exhibited uncompetitive inhibition on bovine adrenal TH activity with a substrate L-tyrosine with the KI value of 0.30 mM. Treatment with L-DOPA at 20~50 ${\mu}$M increased the intracellular dopamine content in PC12 cells, and the increase in dopamine content by L-DOPA was inhibited in part when THP at non-cytotoxic (5-10 ${\mu}$M) or cytotoxic (15${\mu}$M) concentrations was associated with L-DOPA (20 and 50 ${\mu}$M) for 24 h incubation. These results suggest that THP at 5-10${\mu}$M decreases the basal dopamine content and reduces the increased dopamine content induced by L-DOPA in part by the inhibition of TH activity, and that THP at 15${\mu}$M also decreases dopamine content by oxidative stress in PC12 cells.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.877-883
• /
• 2003

Multi-degradable master hatch (M/B) was prepared and 0.05 mm polyethylene (PP) food packaging films containing 0, 10, and 20% M/B were manufactured by inflation film processing. The films were exposed to UV radiation, fungi, and heat in order to observe their photolysis, biodegradability, and thermal degradability, respectively. While pure PP film maintained more than 70% of its original elongation after 8 weeks of UV radiation, an almost perfect loss in the elongation of PP film containing 20% M/B was observed. Significant decreases in elongation of PP films by heat treatment $(68{\pm}2^{\circ}C)$ were also found in samples containing the multi-degradable M/B. By observing changes in film surface after the inoculation of fungi using scanning electron microscopy (SEM), the biodegradability of plastic film could be accelerated with the addition of multi-degradable M/B. The results of the mulching test in yard showed that adding multi-degradable M/B can effectively degrade plastic films in natural environmental conditions without interrupting the growth of plants.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.384-388
• /
• 2000

For the control of Corythucha ciliata, the insecticidal activity of five commercial pesticides (Monocrotophos 25%SL, Phosphamidon 50%SL, Imidacloprid 20%DC, Thiamethoxam 15%DC and Acetamiprid 20%SL) were examined with trunk injection method in Seoul, Sanbon and Chungju. The insecticidal activity of five commercial pesticides was >88%. The insecticidal activity of Monocrotophos maintained 31 days later after trunk injection when treated leaves were supplied to this pest. This result indicates that one application of trunk injection is enough to control this pest, and this method can save the control cost compared with ground application which should be applied two or three times per year to control this pest. To make the model of treatment dosage at each D.B.H class (cm), $1.0m{\ell}/DBH$, $1.5m{\ell}/DBH$ and $2.0m{\ell}/DBH$ pesticide dosage was used. At <20cm, the insecticidal activity of $1.0m{\ell}$ dosage was >95%, and $1.5-2.5m{\ell}$ dosage was needed for the effective control at 30~50cm. More than $2.5m{\ell}$ dosage was effective at >50cm. Spray method was used in laboratory to select pesticides for ground application. Three commercial pesticides (Ethofenprox 20%EC, Ethofenprox 10%WP and Cyfluthrin 1%EC) were used, and all pesticides showed >95% insecticidal activity.