• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.574-592
• /
• 1996

This study investigated the time-dependent dimensional changes of elastomeric impression materials using holographic interferometry. Six commercial impression materials, Permlastic(polysulfide), Xantopren VL (condensation silicone), low and medium viscosity of Exafine, Provil (addition silicone), and Impregum(polyether), were selected. Steel plate was used as custom tray, and each impression specimen was 20 mm in width, 15 mm in length and 3 mm in thickness. Each impression material was evaluated at 30 minutes, 1, 2, 4, 6, 8 and 12 hours after setting using real-time holography. The results were as follow : 1. Xantopren VL and Permlastic showed relatively severe and continuous dimensional changes after setting. Low viscosity of Exafine, Provil, Impregum showed relatively slight dimensional changes with function of time and medium viscosity of Exafine showed almost no dimensional change from 2 hours after setting to 6 hours. 2. On initial dimensional changes within 1 hour, the amount of change in low viscosity of Exafine was the least and Xantopren VL was the largest. 3. On dimensional changes at 4 hours after setting, the amount of change in medium viscosity of Exafine was the least and tile change of Xantopren VL was the largest. 4. In overall dimensional stability during 12 hours, medium viscosity of Exafine was the most stable and Xantopren VL and Permlastic were least stable.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.86.4-86
• /
• 2002

1. Review of one dimensional M-transform 2. Definition of two dimensional(2D)M-transform 3. Properties of 2D M-transform 4. Mean, Autocorrelation 5. Crosscorrelation of input and output of a system 6. Application to fault detection of mechanical shape

• 산업기술연구
• /
• 제13권
• /
• pp.81-87
• /
• 1993

핀끝이 절연 되었을 때와 절연되지 않았을 때의 두가지 경우에 대하여 삼각핀을 2차원적으로 해석하고 또한 삼각핀 끝의 온도를 단지 유한하다고 놓았을 때 이를 1차원적으로 해석하여 각각의 세가지 경우에 대한 핀으로 부터의 열손실과 핀중심을 따른 온도변화를 Biot number와 무차원적인 핀의 길이의 변화에 따라 비교 분석하여 구체적으로 삼각핀에 대한 핀끝의 영향을 보여준다. 결과들은 다음과 같다. 핀의 길이가 아주 짧을 경우 2차원적으로 해석한 핀끝이 절연되지 않았을 때의 열손실에 대한 같은 2차원적으로 해석한 핀끝이 절연 되었을 대의 열손실의 상대오차가 매우 크며 핀의 길이를 따른 무차원적인 온도변화는 1차원적으로 해석한 핀끝의 온도가 유한할 경우에 가장 낮은 값을 나타내며 2차원적으로 해석한 핀끝이 절연되었을 경우가 가장 높은 값을 나타낸다.

• 한국인터넷방송통신학회논문지
• /
• 제17권3호
• /
• pp.121-127
• /
• 2017

최근 공간 데이터와 같은 2차원 데이터를 위한 Semantic Web에 대한 연구가 활발하게 진행되고 있다. 2차원 Semantic Web은 기존의 Geospatial Web과 Semantic Web이 접목되어 다양한 지리 공간 정보와 일반 웹 상의 방대한 비공간 정보를 효율적으로 연계 및 통합하여 제공할 수 있는 지능적인 지리정보 웹 서비스 기술이다. 하지만 다차원 데이터 처리를 위한 연구는 전체적으로 부족한 편이며, 관련 표준 역시 제정되어 있지 않다. 따라서 본 논문에서는 그동안 진행되었던 Ontology 처리 기술과 관련된 다양한 기반 이론 및 기술들을 적용하여 다차원 데이터 처리가 가능한 온톨로지, 질의, 추론에 대한 내용을 제안하였다. 또한 각각 제안한 내용을 다차원 질의가 필요한 가상 시나리오에 적용해보았다.

• 디지털콘텐츠학회 논문지
• /
• 제11권2호
• /
• pp.117-122
• /
• 2010

본 연구는 레이저 도플러의 진동모드에 대한 분석연구이다. 도플러에서 생성되는 진동모드를 측정하여 각 성분을 분석하여 2차원 연구로부터 3차원을 예측 할 수 있는 성질들을 연구하고자 한다. 진동모드는 범위 탐지기(거리 측정 센서)에 의존하고 있다. 즉, 측정거리에 의해 결정되고 있으므로, 생성되는 변수들로부터 2차원에서부터 3차원에서의 진동모드가 어떻게 생성되는지, 어떤 특성의 패턴으로 나타나는지를 연구함과 더불어, 진동모드와 거리와의 관계도 아울러 연구한다.

• 한국환경보건학회지
• /
• 제31권6호
• /
• pp.489-497
• /
• 2005

A numerical method for the mathematical water modeling in 2-dimensional flow has been developed. The model based on a split operator technique, in which, the advection term is calculated using the upwind scheme. The diffusion term is one- dimensionalized and calculated using Crank-Nicholson's implicit finite difference scheme to reduce the numerical errors from large time steps and variable spacings. It also provides a relatively simple and economic method for more accurate simulation of pollutant dispersion. Water depths and flow velocities in the Boreyong reservoir during the normal water periods were predicted by numerical experiments with a 2-dimensional flow model so as to provide current field data for the study of advection and diffusion of pollutants. Developed 2-dimensional water quality model is applied to Boreyong reservoir to simulate a spatial and periodical changes of water quality.

• 대한기계학회논문집B
• /
• 제25권1호
• /
• pp.1-8
• /
• 2001

Performance of a rectangular fin is investigated by a three dimensional analytical method. Heat loss and the temperature obtained from the three dimensional analysis are compared with those calculated from a two dimensional analysis. Fin effectiveness, fin resistance and fin efficiency for the rectangular fin are presented as a function of non-dimensional fin length and fin width. The results are obtained in the following : (1) heat loss calculated from the two dimensional analysis is the same as that obtained from the three dimensional analysis with adiabatic boundary condition in z-direction, (2) heat loss obtained from the two dimensional analysis approaches the value for the three dimensional analysis as the non-dimensional fin width becomes large, (3) fin effectiveness increases as non-dimensional fin length increases and non-dimensional fin width decreases, and vice versa for fin efficiency.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권3호
• /
• pp.97-102
• /
• 2002

Two dimensional Analysis has been applied to most of tunnel lining design in these days. Two dimensional analysis uses beam or curved beam element for finite element method. But because the behaviors of tunnel concrete lining structure is near to shell, it is required to model the tunnel lining as shell structure for safety design of tunnel lining structure. In this paper, two dimensional analysis by beam element and the three dimensional analysis by shell element of tunnel concrete lining are studied, in which 3 type of tunnel lining and lateral pressure factors are considered. As results of the study, three dimensional analyses of the behavior of tunnel concrete lining structure considering lateral pressure factor shows that the moment of three dimensional analysis is greater than those of two dimensional analysis. The results shows that three dimensional analysis is necessary for safety design of tunnel lining.

• 대한기계학회논문집B
• /
• 제28권2호
• /
• pp.189-198
• /
• 2004

We consider the problem of whether the three-dimensional checkerboard has the connectivity. For this purpose, we first consider the problem of determining the effective conductivity of a checkerboard-shaped composite material by the Brownian motion simulation method. Specifically, we use the efficient first-passage-time technique. Simulation results show that the effective conductivity of the three-dimensional checkerboard increases faster than the two-dimensional counterpart as the contrast between the phase conductivities increases. This implies that the three-dimensional checkerboard's connectivity is stronger than the two-dimensional checkerboard's and thus each phase material of the three-dimensional checkerboard is more likely to be connected than not to be connected.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1177-1181
• /
• 2009

Heat loss from a convective rectangular profile annular fin with variable inside fluid heat transfer coefficient and fin height is calculated by using both the one dimensional analytic method and two dimensional variables separation method. Heat loss from the two dimensional method and the relative error of heat loss between the one dimensional method and two dimensional method are presented as a function of the fin length, ambient convection characteristic number and fin height. One of the results shows that the relative error of heat loss between one dimensional method and two dimensional method is within 0.7% in the range of given parameters in this study.