• Proceedings of the Safety Management and Science Conference
• /
• 2008.04a
• /
• pp.135-147
• /
• 2008

The package loading process of the lumbering industry is an operation that after a pair of workers bind three or six lumbers into one unit and cut both ends of the lumbers, transports the weight cargo of 30-50kg by one meter, pack and load at a height of 1.2 meters. This package loading process causes lots of noise and wood dust when workers carry out the heavy work as the above. Therefore we developed the monolithic both ends cutting package loading equipment in order to prevent from getting musculoskeletal disease. An loading bar working system of this equipment is improved from pneumatic pressure system to oil pressure system, furnished the newly designed flow dividers, and developed the new system that a both end array is loaded identically. Also we developed the safety equipment of loading bar in order to prevent workers mistake and overload from malfunction during the package loading process. The main cause of job evasion on working place could be solved by preventing the musculoskeletal disease and improving the working environments.

• The korean journal of orthodontics
• /
• v.21 no.3
• /
• pp.543-560
• /
• 1991

Practitioners are aware of the presence of friction between bracket system and archwire during sliding movement of teeth. Clinically a mesiodistally applied force must exceed the frictional force to produce a tooth movement. The objective of this study were to determine, on a dry condition, changes in magnitude of friction with respect to load, 3rd order inclination (Torque), archwire materials and ligature type. Three wire alloys (Stainless Steel, TMA, NiTi) in two wire sizes (.016, .016x, .022 inch) were examined respect to two bracket system (Straight, Standard), and two ligature type (Metal, Plastic ligature) at three levels of load (100g, 150g, 200g). The results were as follows; 1. Frictional resistance was found to increase with increasing load for S.S., TMA, NiTi. 2. The straight bracket system was exhibited more frictional force than standard bracket system for .016x, .022 S.S. tightly ligated metal ligature. But, torque difference did not increase friction for loose metal ligature & plastic ligature. 3. Regardless of the ligature type, torque and load, stainless steel wire sliding against stainless steel exhibited the lowest friction, and TMA sliding against stainless steel exhibited the highest friction. 4. The loose stainless steel ligature generated lower frictional resistance than plastic ligature in all experimental groups. 5. The following factors affected friction in decreasing order; wire material ligature type, and load.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.7
• /
• pp.621-626
• /
• 2015

This paper presents a camera calibration method in order to estimate the lane detection and inter-vehicle distance estimation system for an automotive safety driving system. In order to implement the lane detection and vision-based inter-vehicle distance estimation to the embedded navigations or black box systems, it is necessary to consider the computation time and algorithm complexity. The process of camera calibration estimates the horizon, the position of the car's hood and the lane width for extraction of region of interest (ROI) from input image sequences. The precision of the calibration method is very important to the lane detection and inter-vehicle distance estimation. The proposed calibration method consists of three main steps: 1) horizon area determination; 2) estimation of the car's hood area; and 3) estimation of initial lane width. Various experimental results show the effectiveness of the proposed method.

• International Journal of Safety
• /
• v.10 no.2
• /
• pp.10-15
• /
• 2011

The reconfigurable control systems based on feedback controls are utilized to compensate for damages of actuators in control systems. Such systems have multiple feedback controls and switch them in accordance with the degrees of the failures of the actuators. In order to be able to assess those systems, this paper develops a method to obtain reliabilities of reconfigurable dynamical systems which are interconnected in parallel / series configuration. By calculating reliabilities of interconnected dynamical systems, it is possible to assess many dynamical systems by comparing their reliabilities. Firstly, reliabilities of subsystems are obtained according to the definitions of the failures in terms of robust reliability for each subsystem. Then, the reliability of overall system is calculated from reliabilities of subsystems, using the methodology employed for probabilistic safety assessment. Failure rates of subsystems with feedbacks for reconfiguration change in certain time periods because of the switching of feedback controls. In order to deal with this, combinations of subsystems which compose overall system for each time period are derived by the methodology mentioned above and then integrated to calculate the reliability of overall system for a specific time. An illustrative example shows the validity and details of the proposed method.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.46-51
• /
• 2006

In order to utilize the refrigerants condensation heat of condenser on the absorption chiller system, the solution cooling condenser(SCC) were proposed, which weak solution of absorber outlet use as a cooling water. As the UA of the solution cooling condenser increased, increasement of COP is about maximum 0.09 in occasion of single effect and is about maximum 0.08 in occasion of double effect series flow. In the case of heat exchanger efficiency is about 0.85, it's increments are 0.08 and 0.072, each. And solution cooling condenser is a more effective device in the single effect absorption system more than double effect system for the principle of operation. In order to increases the heat of solution cooling condenser, if reduce the flow rate of cooling water or the value of UA, it makes COP increase a little, but it brought COP decrease because of increasing the pressure of system.

• Journal of Industrial Convergence
• /
• v.13 no.3
• /
• pp.27-39
• /
• 2015

This Study aims to analyze the management performances of the rubber products from the perspectives of ISO9001 Quality Management System, which is a new management technique for management innovation, in order to secure the competitiveness of the small and medium manufacturers of rubber products for automobile as automobile application components. The results of the analysis can be summarized as follows: First, as the results of the analysis of effect of the (1) responsibility of the management, (2) resources management, (3) realization of the products, and (4) measurement, analysis and improvement, which are the 4 core requirements of the ISO9001 Quality Management System, on the management performances of the small and medium sized manufacturers of the rubber components for automobile, it was found that only the responsibility of the management and resources management affect the management performance. The above research findings imply that the company must absolutely rely on the upper ranked groups rather than the lower ranked groups, and on the responsibilities of the management rather than the upper ranked groups in order to elevate the management performance of the small and medium sized manufacturers of the rubber components for automobile.

• Journal of the Korean Institute of Rural Architecture
• /
• v.19 no.2
• /
• pp.9-16
• /
• 2017

The study analyzed the heat losses and the building energy efficiency grade by the energy simulation using the ENERGY# and ECO2 programs for the three types of Standard design of rural houses. It was calculated the energy efficiency rating by the ECO2 program for the rural housing standard design, and the energy demand and the energy consumption by each factor were compared and analyzed. And it analyzed energy consumption by element of each house by ENERGY # program. As a result, first in the evaluation of the energy efficiency grade of buildings by the ECO2 program, the rating for primary energy requirement for the housing newly built by the standard design of rural house is expected to range from 2 to 4 with 189.3 to $238.7kWh/m^2.a$. Second, the energy loss of each part of standard design of rural housing occurs in the order of ventilation 39%, window 33%, outer wall 14%, roof 9%, bottom 5%, and energy loss through ventilation and window occurs more than 70%. Third, the most beneficial effects on the energy efficiency grade is obtained the lowest grade of all three types by 2 when the lowering of the window and door heat transmission rate and the lowering of the light density, and the heat exchange ventilation device is not installed. Fourth, in the standard design of rural housing, the energy demand is occupied by heating > hot water > lighting order, and the order of the weight is changed in order of heating > lighting > ventilation > hot water. Fifth, building energy efficiency assessment system needs to establish policy for fixing rural housing energy as a practical device to ensure energy performance and quality.

• Journal of Veterinary Clinics
• /
• v.13 no.2
• /
• pp.171-176
• /
• 1996

In this study, dldctronic identification system of individual dairy cow was developed for autocatization of stoxkvreeding management. To automize the breeding management, it is necessary to obtain and analyze the individual information distinguished from others perferentially. Electronic identification system can distinguish individual livestock from others with electromagnetic wave signal recognition system. Electoronic identification system consists of transmitter transmitting the oscillated signal and receiver set. The transmitted signal from transmitter clung to individual livestock is received from the receiving antenna and the signal in different according to the established value of the register. By distinct signal recieved from the reciever, wi can distinguish the identity of a livestock from others clearly. This system can manage $2^{12}$ individuals with a reciever theoretically. However in order to reduce the errors by analogous signal, this system uses only triple number and can manage 1365 individuals with a reciever practically. This system can be connevtted to Max 232 and microcomputer for the breeding management efficiently.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.110.1-110.1
• /
• 2011

This study analyzed the performance of long term operation photovoltaic system The 50 kWp grid connected photovoltaic system which was installed at KEPRI site in 1999 has been operated more than 12 years. In order to acquire long term operation characteristics of medium size photovoltaic system, the operation test data related on power generation electricity and capacity factor of 50 kWp system, which have been collected since 1999, were analysed. From the analysing results, 57.7 MWh in annual power generation electricity of 50 kWp photovoltaic system in 1999 has been decreased 49.1 MWh in 2005 and reached 38.0 MWh in 2010. In addition to, the capacity factor of 50 kWp photovoltaic system also showed 13.2 % in 1999, 11.2% in 2005 and finally reached 8.8% in 2011. The operation test data showed a trend of decreasing of generation electricity and capacity factor during the 12 years operation time and we guessed that was caused by solar cell performance degradation and decreasing of PCS system efficiency.

• Korea Trade Review
• /
• v.44 no.2
• /
• pp.143-157
• /
• 2019

The purpose of this study is to review domestic and foreign origin labeling system in order to implement origin labeling system in the perspective of protecting the interests of consumers, and to suggest governmental improvements by analyzing problems embedded in current labeling system. The results analysis show complexity of related legal system, lack of expertise at the stage of labeling, and inefficiency of crackdown authority. The improvement could be suggested in two ways: supporting plans for the ones who have duty of labeling and improvement plans in origin management system. As supporting plans, we suggest the need for an automatic origin determination system, appropriate education on origin stakeholders, and introduction of origin certification system. For improvement plans, there are unification of country of origin labeling related laws, utilization of FTA product specific rules, and QR code, expert confirmation system. Since the origin labeling issue has become important, proactive and quick responses must follow with thorough examination the effect of the origin labeling on consumer welfare.