• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.583-592
• /
• 2014

This study was carried out to investigate the operational time and productivity of logging operation by chain saw, yarder attached on tractor, tower-yarder, mini-truck, mini-forwarder, and chipping operations by mini-chipper, large-chipper in order to develop the efficient logging operation system for utilization of forest-biomass. As a result, the average felling and bucking time using chain saw at the site 1 and 2 was observed to be 182.7 sec/cycle and 518.5 sec/cycle respectively. The average yarding time was 202.5 sec/cycle using yarder attached on tractor and 295.1 sec/cycle using tower-yarder. The average forwarding time was 2,073 sec/cycle using mini-truck and 2,248.4 sec/cycle using mini-forwarder. The operational time of felling and bucking using chain-saw can be delayed according to the direction of fallen trees. The selection of felling direction is very important to yarding operation because the direction between width-yarding and felling are interrelated. Productivity can be improved through educating and training operators in the yarding operations. Mini-forwarder is needed to use because of higher productivity and lower cost than mini-truck. The operational productivity of felling and bucking by chain saw was $66.96m^3/man{\cdot}day$ and $43.86m^3/man{\cdot}day$ at site 1 and 2 respectively. The yarding productivity was $5.68m^3/man{\cdot}day$ by yarder attached on tractor, $10.74m^3/man{\cdot}day$ by tower-yarder. The forwarding productivity was $21.29m^3/man{\cdot}day$ by mini-truck, $28.57m^3/man{\cdot}day$ by mini-forwarder. The chipping productivity was $4.42m^3/man{\cdot}day$ by mini-chipper, $21.87m^3/man{\cdot}day$ by large-chipper.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.168-174
• /
• 2011

Various La-based perovskite catalysts were prepared by a Pechini method, and they were applied to the low-temperature oxidation of odor compounds exhausted from waste food treatment process for effective deodorization. Quantitative and qualitative analyses of exhausted gas were conducted to measure the amount of major odor compounds with respect to operation time. A standard odor sample composed of major odor compounds was then prepared for use as a feed for oxidation reaction system. Various transition metal(M)-substituted La-based perovskite catalysts ($LaMO_{3}$: M=Cr, Mn, Fe, Co, and Ni) were prepared and applied to the oxidation of odor compounds in order to investigate the $LaNiO_3$ catalyst showed the best catalytic performance. Pt-substituted perovskite catalysts ($LaNi_{1-x}Pt_{x}O_{3}$: x=0, 0.03, 0.1, and 0.3) were then prepared for enhancing the catalytic performance. It was found that $LaNi_{0.9}Pt_{0.1}O_{3}$ catalyst served as the most efficient catalyst. Supported perovskite catalysts ($XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$: X=perovskite content(wt%), 0, 10, 20, 30, 40, 50, and 100) were finally applied for the purpose of maximizing the catalytic performance of perovskite catalyst in the low-temperature oxidation reaction. Catalytic performance of $XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$ catalysts showed a volcano-shaped curve with respect to perovskite content. Among the catalysts tested, $20LaNi_{0.9}Pt_{0.1}O_{3}$/$Al_{2}O_{3}$ catalyst exhibited the highest conversion of odor compounds of 88.7% at $180^{\circ}C$.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.3
• /
• pp.209-217
• /
• 2009

In this study, the antibacterial activity, antioxidative effects, inhibitory effects on tyrosinase of Inula britannica flower extracts were investigated. MIC values of ethyl acetate fraction from Inula britannica flower on P. acnes 0.25 %, respectively. The results showed that the antibacterial activity of the ethyl acetate fraction was the highest in the P. acnes. The free radical (1,1-diphenyl-2-picrylhydrazyl, DPPH) scavenging activities ($FSC_{50}$) of ethyl acetate fraction of Inula britannica flower was $8.55{\mu}g$/mL. Reactive oxygen species (ROS) scavenging activities ($OSC_{50}$) of some fInula britannica flower extracts on ROS generated in $Fe^{3+}$- EDTA/$H_2O_2$ system were investigated using the luminol-dependent chemiluminescence assay. The order of ROS scavenging activities were ethyl acetate fraction $0.24{\mu}g$/mL. Ethyl acetate fraction showed the most prominent ROS scavenging activity. The protective effects of extract/fractions of Inula britannica flower on the rose-bengal sensitized photohemolysis of human erythrocytes were investigated. The Inula britannica flower extracts suppressed photohemolysis in a concentration dependent manner ($5{\sim}100{\mu}g$/mL), particularly deglycosylated flavonoid aglycone fraction exhibited the most prominent celluar protective effect ($\tau_{50}$, 164.15 min at $25{\mu}g$/mL). The inhibitory effect of Inula britannica flower extracts on tyrosinase was investigated to assess their whitening efficacy. Inhibitory effects ($IC_{50}$) on tyrosinase of some Inula britannica flower extracts were high. Ethyl acetate fraction has $IC_{50}$ of $87.03{\mu}g$/mL. These results indicate that extract/fractions of Inula britannica flower can function as antioxidants in biological systems, particularly skin exposed to UV radiation by scavenging $^1O_2$ and other ROS, and protect cellular membranes against ROS. And inhibitory activity on tyrosinase of the ethyl acetate fraction and high potential as bactericide against the skin pathogenic bacteria could be applicable to new functional cosmetics for antioxidant, antiaging, antibacterial activity.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.337-343
• /
• 2020

This study was carried out to evaluate the yield of cuttings according to the planting and runner releasing times of mother plants in order to raise the cutting seedlings of raising seedling period 75 days or more needed for forcing culture of strawberries to be transplanted into the field around the 15^th of September. Three domestic cultivars of 'Maehyang', 'Jukhyang', and 'Kuemsil' were tested. For experiment 1 to determine the yield of cuttings with the change of transplanting time, the mother plant were planted on February 28, March 20, and April 9 in 20 days intervals, and the cuttings were collected two to three times from June 4 to July 1. Experiment 2 was conducted to investigate the yield of cuttings depending on the runner releasing time, the runners were released in three intervals of 20 days, 40 days, and 60 days after planting the mother plant on March 5, and the cutting were collected once to three times from May 29 to June 26. From the comparisons of cutting yield according to the transplanting time of mother plants, February 28 treatment was more 9~25% and 114~165% for each cultivar than March 20 and April 9, respectively (Experiment 1). The yield of cuttings with releasing time 20 days after planting the mother plants had higher by 60~77% and 104~176% for each cultivar than 40 days and 60 days, respectively (Experiment 2). From these results, in case of propagating the seedlings from cuttings needed for field planting around September 15, early planting around in the latter part of February is the best for cuttings yield. In addition, releasing after the removal of the runners produced from mother plants by 20 days after planting gives an advantage over higher yield of cuttings. Consequently, this study suggest to apply an efficient raising seedling system for labor saving and quality improvement in raising seedlings of three strawberry cultivars in Korea.

• Progress in Medical Physics
• /
• v.24 no.1
• /
• pp.48-53
• /
• 2013

Monte Carlo method has been known as the most accurate method for calculating absorbed dose in the human body, and an anthropomorphic phantom has been mainly used as a method of simulating internal organs for using such a calculation method. However, various efforts are made to extract data on several internal organs in the human body directly from CT DICOM files in recent Monte Carlo calculation using Geant4 code and to use by converting them into the geometry necessary for simulation. Such a function makes it possible to calculate the internal absorbed dose accurately while duplicating the actual human anatomical structure. Thus, this study calculated the absorbed dose in the human body by using Geant4 associating with DICOM files, and aimed to confirm the usefulness by compare the result with the measured dose using a Gafchromic EBT2 film. This study compared the dose calculated using simulation and the measured dose in beam central axis using the EBT2 film. The results showed that the range of difference was an average of 3.75% except for a build-up region, in which the dose rapidly changed from skin surface to the depth of maximum dose. In addition, this study made it easy to confirm the target absorbed dose by internal organ and organ through the output of the calculated value of dose by CT slice and the dose value of each voxel in each slice. Thus, the method that outputs dose value by slice and voxel through the use of CT DICOM, which is actual image data of human body, instead of the anthropomorphic phantom enables accurate dose calculations of various regions. Therefore, it is considered that it will be useful for dose calculation of radiotherapy planning system in the future. Moreover, it is applicable for currently-used several energy ranges in current use, so it is considered that it will be effectively used in order to check the radiation absorbed dose in the human body.

• Journal of Preventive Medicine and Public Health
• /
• v.17 no.1
• /
• pp.193-202
• /
• 1984

Clinical and statistical observations were performed on 1,930 cases of pregnant women who were admitted for delivery in the Department of Obstetrics, Kyung Hee University Hospital during 1 year (1982) and on 1,961 cases of neonates who were born to the former. The results were obtained as follows: 1. Concerning maternal age distribution, the commonest age group was that of $25{\sim}29$ and the proportion of the age group $20{\sim}29$ was 82.4% of all. 2. Concerning obstetrical history, the proportion of the women who had no prior experience of delivery nor abortion was the highest, 45.5%. 3. Concerning abortion history, 36.1% of the women had experienced it and the mean number was 1.8. 4. Type of delivery was as follows: Spontaneous delivery; 58.1%, Vacuum extracted delivery; 22.4%, Cesarean section; 18:8%, Breech delivery; 0.7%. 5. Gestational period distribution of the neonates was as follows: Under 37 weeks (Preterm); 7.1%, Between 38 and 42 weeks (Term); 87.2%, More than 43 weeks (Postterm); 5.7%. 6. Sex ratio of male to female of the neonates was 1.03:1. 7. Birth weight distribution was as follows: Under 2,500gm.; 9.0%, Between 2,501 and 4,000 gm.; 85.5%, More than 4,001gm.; 5.5%. 8. The measured growth data of neonates were as follows: Body weight; 3.28kg. for male, 3.18kg. for female, Body height; 50.40cm for male, 49.77cm for female, Chest circumference; 32.54cm for male. 32.17cm for female, Head circumference; 33.49cm for male, 33.11cm for female. 9. The mean values of Apgar score per 1 minute were 7.70 for male and 7.63 for female. 10. The incidence rate of neonatal jaundice was 50.0% and no difference in sex respectively, but more prevalent in preform baby. 11. The incidence rate of neonatal diseases was 8.9% and the commonest disease was neonatal infection (35.6%). 12. Concerning multiple pregnancy, ratio to single births was 1 : 64.3 and the sex ratio of male to female was 1 : 1.03. 13. The incidence rate of congenital anomaly was 2.4% and the commonest anomaly was digestive system anomaly (30.9%). 14. The neonatal mortality rate was 11.73 per 1,000 neonates, and the majority of neonatal deaths were in low birth weight and preform neonates (78.3%). 15. The causes of neonatal deaths in decreasing order of frequency were abnormal ventilation (39.1%), prematurity (30.4%), congenital anomaly (13.0%) and etc.

• Radiation Oncology Journal
• /
• v.15 no.4
• /
• pp.321-329
• /
• 1997

Purpose : It is well known that the risk of lymph nodes metastases to head and neck cancers are influenced by the location and size of the Primary tumor. as well as the degree and types of histological differentiation. However, data on the statistical analyses of lymph node metastases from the head and neck cancers among Korean Population are not available at present. In order to obtain current status of such data, we have analyzed cancer patients at the department of radiation oncology, korea universityhospital for radiation treatment. Materials and Methods : We have evaluated nine-hundred and ninetyseven (997) head and neck cancer Patients who visited to the Department of radiation oncology, between November 1981 to December 1995. After careful physical examinations and CAT scan, Patients were divided into two groups, those with positive lymph node metastases and with negative lymph node metastases. The nodal status were classified according to the TNM system of American Joint Committee on Cancer (AJCC) Besults : Four-hundred and sixteen Patients out of the 997 patients were lymph node positive $(42\%)$ and 581 patients were lymph node negative $(58\%)$ when they were first presented at the department of radiation oncelogy. According to the AJCC classification, the distribution of positive lymph node is as follow: Nl:106 $(25.5\%),\;N2a:100\;(24\%),\;N2b:68\;(16.4\%),\;N2c:69\;(16.6\%),\;3:73\;(15\%).$ respectively. The frequency of lymph node metastases according to the primary sites is as follow : larynx 283 $(28.5\%)$, paranasal sinuses: 182 $(18\%),\;oropharynx:144\;(14.5\%)\;nasopharynx:122(12\%),\;oral\;cavity\;92\;(9\%),\;hypopharynx:71\;(7\%),\;falivary\;gland:58\;(6\%)$ unknown primary:31 $(3\%),\;skin:\;14(2\%)$,. The most frequent Primary site for the positive Iymph node metastases was nasopharynx $(71\%)$ followed by hypopharynx $(69\%),\;oropharynx\;(64\%),\;oral\;cavity\;(39\%)$ The most common histologic type was squamous cell carcinoma (652/997: $65.4\%$). followed by malignant lymphoma $(109/997:11\%)$. Conclusion : Statistical results of lymph node metastases from head and neck cancer at our department were very similar to those obtained from other countries. It is concluded that the location of Primary cancer influences sites of metastases on head and neck, and stage of the primary cancer also influences the development of metastatic lesions. Since the present study is limited on the data collected from one institute. further statistical analyses on Korean cancer Patients are warrented.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3263-3291
• /
• 1974

Experimental work of grain bin was carried out to develop the methods of natural air in-bin drying and storage. The method is considered to be more economical, labour saving, and an effective countermeasure to grain loss. To examine the possibility of farm use of the grain bin and to analyze the related factors concerned with in-bin grain drying and storage, ambient air conditions (especially the change of air temperature and relative humidity) and grain quality during drying and storage periods were investigated. A laboratory model bin was constructed to investigate the effect of different forced air conditions on the drying characteristics of rice. In addition, a grain bin with 2.2m diameter and 1.8m height, considered to be the optimum size for the average Korean farm, was constructed and tested to examine the drying and storing characteristics of rice. The weather data analyzed in this study was the nine-year (from 1964 to 1972) record of air temperature and relative humidity in the Suweon area, and the thirty-year (from 1931 to 1960) record of pentad normal relative humidity and air temperature in the Seoul area. From the results of the weather data analyses, the adequate air delivery hours (which was arbitrary defined as the condition to give less than 75% relative humidity) to dry the rice during October were about nine hours (from approximately 10 A.M. to 7 P.M, ) a day, in which the average air temperature was about 15.9$^{\circ}C$ and average relative humidity was 66%. The occurence of days having three hours of such conditions was 1, 2, and 1-day within the 1st, 2nd add last 10-day periods for the month of October, respectively. Therefore, it may be considered that the weather condition in October was satisfactory for the forced natural air drying. The results of the laboratory model bin test were analyzed to obtain the drying curve and drying rate for different drying stages and grain layers in the bin corresponding to various conditions of forced natural air. A drying experiment with a prototype grain bin showed that an approximate 5 percent grain moisture gradient through a 1.6 meter grain deposit was observed after 80 hours of intermittent drying, giving an over dried zone in the lower grain layers and an extremely high grain moisture zone in the upper layers. This indicates that an effective measure should be taken to reduce this high moisture gradient. In order to investigate the drying characteristics of bulk grain in a layerturning operation a grain bin test was performed. This showed a significant improvement of uniform drying. In this test, approximate 107 hours were required to dry a depth of 1.6 meter of grain from an initial moisture content of 22.2 percent to a moisture content of 16.7 percent using an air delivery rate of 2.8 cubic meter per a minute per every cubic meter of grain. This resulted in a 2 percent moisture gradient from the top to the bottom of the bin. During storage period, till the end of June the average temperature of grain was 2~3$^{\circ}C$ higher than ambient air temperature. But during July when the grain moisture content went up slightly (less than 1 percent), the average temperature of the grain also increased to 3~5$^{\circ}C$ higher than ambient air temperature. It is therefore recommended that for safe grain storage, grain should not be stored in sheet metal bins after mid May. From the above results, in-bin rice drying and storage can be used effectively on Korean farms. It is strongly recommended that the use of grain-bin system should be implemented for farm use to improve farm drying and storage of rice.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2012

State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.24 no.4
• /
• pp.69-79
• /
• 1982

The objective of this study is to contribute to drainage planning in the most realistic and economical way by establishing the relationship between rice yield reduction and overhead flooding by muddy water of each growth stage of paddy, which is the most important factor in determining optimum drainage facilities. This study was based on the data mainly from the experimental reports of the Office of Rural Development of Korea, Reduction Rate Estimation for Summer Crops, published by Ministry of Agriculture and Forestry of Japan and other related research documenta- tion. The results of this study are summarized as follows 1. Damages by overhead flooding are highest in heading stage and have the tendency of decrease in the order of booting stage, panicle formation stage, tillering stage, and stage just after transplanting. Damages by overhead flooding of each growing stage are as follows: a) It is considered that overhead flooding just after transplanting gives a little influence on plant growth and yield because the paddy has sufficient growth period from floo ding to harvest time. b) Jt is analyzed that according to the equation y=11 12x 0.908 which is derived from this study, damages by overhead flooding during tillering stage for 1, 2, 3 successive days are 11.1 %, 20.9%, and 30.2% respectively. c) Damages by overhead flooding after panicle formation stage are very serious because recovering period is very short after damage and ineffective tillering is much. Acc- ording to the equation y=9. 58x+10. Ol derived from this study, damages by overhead flooding fal 1,2,3,5 successive days are 19.6%, 29.2%, 38.8%, 57.9% respectively. d) Booting stage is the very important period in which young panicle has grown up almost completely and the number of glumous flower is fixed since reduction division takes place in the microspore mother cell and enbryo mother cell. According to the equation y=39. 66x 0.558 derived from this study, damages by overhead floodingfor 0.5, 1, 3, 5 successive days are 26.9%, 39.7%, 72. 2% and 97.4%, respectively. Therefore, damages by overhead flooding is very serious during the hooting stage. e) When ear of paddy emerges, flowering begins on that day or the next day; when paddy flowers, fertilization will be completed 2-3 hours after flowering. Therefore overhead flooding during heading stage impedes flowering and increases sterilizing percentage. From this reason damages of heading stage are larger than that of booting stage. According to the equation y-41 94x 0.589 derived from this study, damages by overhead flooding for 0.5, 1, 3, 5, successive days are 27.9%, 63.1 %, 80.1%, and 100% 2. Considering that temperature of booting stage is higher than that of beading stage and plant height of booting stage is ten centimeters shorter than that of heading stage, booting stage should be taken as a critical period for drainage planning because possi- bility of damage occurrence in booting stage is larger than that of heading stage. There-fore, it is considered that booting stage should be taken as critical period of paddy growth for drainage planning. 3. Overhead flooding depth is different depending on the stage of growth. In case, booting stage is adopted as design stage of growth for drainage planning, it is conside red that the allowable flooding depth for new varieties and general varieties are 70cm and 80cm respectively. 4. Reduction Rate Estimation by Wind and Flood for Rice Planting of the present design criteria for drainage planning shows damage by overhead flooding for 1 to 2, 3 to 4, 5 to 7 consecutive days; damages by overhead flooding varies considerably over several hours and experimental condition of soil, variety of paddy, and climate differs with real situation. From these reasons, damage by flooding could not be estimated properly in the past. This study has derived the equation which shows damages by flooding of each growth stage on an hourly basis. Therefore, it has become possible to compute the exact damages in case duration of overhead flooding is known.