• IE interfaces
• /
• v.11 no.2
• /
• pp.177-190
• /
• 1998

The work-order performs an important role in make-to-order production. The development of work-order system in this production is more complex than work-order system in planing production. To construct work-order system, load of directors for work-order must be decreased, and production management between scheduling of master plan and current workshop conditions must be considered. In this study, we grasped troubles in present work-order system and flows of information for work order. Using these results are made database schemas and data flow diagrams for effective development of work-order system. And then, for successful establishment of work-order system and actual use of directors, we considered systematic and easy user-interface. For a case study, development procedures of work-order system are presented for plant factory.

• Journal of the Korean Mathematical Society
• /
• v.45 no.2
• /
• pp.405-423
• /
• 2008

By using critical point theorem, we study a higher order difference system, and obtain some new sufficient conditions ensuring the existence of periodic solutions for such a system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.54.3-54
• /
• 2001

This paper presents a controller design technique for standard 2nd-order system satisfying user-specified phase margin. A simple method is presented to meet stability margin for the 2nd-order system, which is important since the 2nd-order plant models are frequently encountered in the practical plant models such as actuators of the optical drive systems. Through the comparison of the specified stability margin and achieved stability margin, it is shown in the simple example that the proposed technique is useful in the initial design of control systems with stability margin specifications.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.453-463
• /
• 2017

This paper discusses the measurement of frequency response functions for various dc-dc converters. The frequency domain identification procedure is applied to the measured frequency responses. The identified transfer functions are primarily used in developing behavioral models for dc-dc converters. Distributed power systems are based upon such converters in cascade, parallel and several other configurations. The system level analysis of a complete system becomes complex when the identified transfer functions are of high order. Therefore, a certain technique needs to be applied for order reduction of the identified transfer functions. During the process of order reduction, it has to be ensured that the system retains the dynamics of the full order system. The technique used here is based on the Hankel singular values of a system. A systematic procedure is given to retain the maximum energy states for the reduced order model. A dynamic analysis is performed for behavioral models based on full and reduced order frequency responses. The close agreement of results validates the effectiveness of the model order reduction. Stability is the key design objective for any system designer. Therefore, the measured frequency responses at the interface of the source and load are also used to predict stability of the system.

• Journal of the Korean Geographical Society
• /
• v.46 no.2
• /
• pp.115-133
• /
• 2011

Yamada's mountain ordering is to be said as an upward system, because the area and volume of the mountains become the larger as more than two lower order mountains constitute the higher order mountain. However, his mountain ordering shows some limitations to totally understand the mountain systems and to systematically manage the various kinds of mountainous informations. Because the independent third, fourth and so on, as well as the second lower order mountains are included in the higher order mountain. In order to solve the problem above, the downward system is suggested as the alternative of his upward system. The downward system means that the higher order mountain is classified into the second lower order mountains, and the second lower order mountain is classified into the third lower order mountains and finally the 2nd order mountain classified into the 1st order mountains. The method to classify a certain mountain systematically into all mountainous elements and the new nomenclature to be used for the classified elements are developed, using the downward system above. And the structure of database could be also suggested for the integrated and systematic management of mountain informations.

• The Journal of Fisheries Business Administration
• /
• v.22 no.1
• /
• pp.1-52
• /
• 1991

This study deals with the evolutional history of the holding and utilization of fisheries resources in Korea. Fisheries resources have the basic characteristics of the density dependent self-regulating renewable and common property resources, Irrational utilization of fisheries resources is mainly due to the unlimited access to the resources. The holding and utilization of fisheries resources in Koryo era was opened to everyone. But it was nationalized in the early Yi Dynasty. The purpose of its nationalization was to provent the paticular powered-man with their monoplized holding and to levy fisheries tax. Eoeop-peop, the first modern fisheries law in Korea, was enacted as a part of the invasion policy of Japan in 1908. With the japanese annexation of Korea in 1910, the Japanese Government established a new institutional system of fisheries as a part of an overall reformation of the institutional for an implementation of the colonial policy. It was very the new enacted Fisheries Law (Gyogyorei). Also the Government enacted compulsorily another new Fisheries Law (Chosen Gyogyorei) with its adjunct laws and regulations revise the institutional system of fisheries on May 1, 1930. After Eoeop-peop enactment, the fisheries resources in Korea could be used only under the license, permission, and statement. After Korea was from Japan in 1945, Korea Government at last enacted the new fisheries law (Susaneop-peop) in 1953. The goal of Susaneop-peop was to achive the general usage and protection of the fisheries resources, and to attain the development and democratization of the fishery in Korea. This law was amended 13 times until 1990. The license fishery have a legal right on the fishery, called a fishery rigt. This right means a right of exclusive occupation and utilization of a unit of the inshore fishing grounds. The main evolutional issues of license fishery are as the following : 1) the foundation of the exclusive usable fishery right(1911, Gyogyorei), 2) the deletion of the settled U9space lift net and settled space sein net fishery, and the expansion of the cooperative fishery-No.1, 2, and 3 type cooperative fishery-(3rd amendment, 1963), 3) the deletion of the No.2 and 3 type cooperative fishery, and the separation of the culturing fishery in No.1 and 2 type culturing fishery (13th amendment, 1990). The effective period of the license fishery was amended as the following : 1) 1908(Eoeop-peop) : within 10 years, renovation system, 2) 1929(Chosen Gyogyorei) : within 10 years, unlimited extension system, 3) 1971. 7th amendment : 10 years, renovation system, 4) 1972. 8th amendment : 10 years, only 1 extension system, 5) 1975. 9th amendment : 5-10 years, only 1 extension system, 6) 1990.13th amendment : 10 years, within 10 years of total extensional years. The priority order of the fishery license was established in 1953 (Susaneop-peop). The amendment of it is as follows : 1) 1953. enactment \circled1 the fishing grounds that the fishery right is extablished 1st order : the existing fishery right man, unlimited renovation 2nd order : the corporate that the regional fisherfolk organized 3rd order : the rest experienced fishermen \circled2 new fishing grounds 1st order : the corporate that the regional fisherfolk organized 2nd order : the rest experienced fishermen 2) 1971. 9th amendment \circled1 the fishing grounds that the fishery right is established 1st order : the existing fishery right man, unlimited renovation 2nd order : the Eochongye that the regional fisherfolk organized 3rd order : the regional fishery cooperative that the regional fisherfolk organized 4th order : the rest experienced fishermen \circled2 new fishing grounds 1st order : the Eochongye that the regional fisherfolk organized 2nd order : the regional fishery cooperative that the regional fisherfolk organized 3rd order : the rest experienced fishermen 3) 1981. 10th amendment \circled1 the inside of No.1 type cooperative fishing grounds 1st order : the Eochongye that the regional fisherfolk organized 2nd order : the regional fishery cooperative that the regional fisherfolk organized 3rd orer : the rest experienced fishermen 4) 1990. 13th amendment \circled1 No.1 type cultural fishery 1st order : the Eochongye that the regional fisherfolk organized 2nd order : the regional fishery cooperative that the regional fisherfolk organized 3rd order : the rest experienced fishermen \circled2 No.2 type cultural and settle fisher : general priority order The effective period of the permission fishery was amended 6 timed. First, it was within 5 years and renovation system (Eoeop-peop). Now it is 5 years and renovation system. The effective period of the statement fishery was amended 4 times. First, it was within 5 years, and then was amended within 3 years(Chonsen Gyogyorei). Now it is 5 years.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.507-515
• /
• 2013

This paper proposes a compensation method for the $2^{nd}$-order harmonic of single-phase grid-connected wind power generation systems. Theoretically, a single-phase grid-connected inverter system has no choice but to cause the $2^{nd}$-order harmonic to DC-link voltage. The reference active current is affected by the DC-link voltage. The output current from the reference active current is distorted by the $1^{st}$ and $3^{rd}$-order harmonic. The proposed method can compensate, conveniently, the reference active current with the $2^{nd}$-order harmonic. To reduce the $2^{nd}$-order ripple in the reference active current, proposed method takes a PR controller as a feed-forward compensator. PR controllers can implement selective harmonic compensation without excessive computational requirements; the use of these controllers simplifies the method. Both the simulation and experimental results agree well with the theoretical analysis.

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.4
• /
• pp.283-288
• /
• 2002

This paper has shown that the impulse and the unit step responses of 2nd-order systems can be computed by an analytic method. Three different 2nd-order systems are investigated: the prototype system, the system with one LHP(left half plane) real zero and the system with one RHP(right half plane) real zero. It has also shown that the effects of the LHP or the RHP zero are very serious when the zero is getting closer to the origin on the complex plane. Based on these analytic results, this paper has presented two sufficient and necessary conditions for 2nd-order linear SISO(single-input/single-output) stable systems to have the nonovershooting and the monotone nondecreasing step response, respectively. The latter condition can be extended to the sufficient conditions for the monotone nondecreasing step response of high-order systems.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.1
• /
• pp.43-53
• /
• 1996

This study was initiated to investigate (1) the current sizing system for mail-order clothing, (2) consumers' preference for sizing systems, and (3) consumers' satisfaction with garment size. The apparel items and the sizes available at various mail-order companies in Korea were also reviewed. This investigation of consumers' preferences for various size description systems includes a survey of 410 men and women who had purchased garments by mail-order. The data were analyzed by Statistical Analysis System/pc. The major results are as follows; 1. The sizing system of mail-order clothing was different by garment items. The number of apparel sizes available for mail-order purchasing was three or less. The most mail∼order garments were labeled by the numerical size codes of body girth nleasurements or letter code (S, M, L). 2. The size description system most prefered by female subjects(N : 360) was the numerical size code of a body measurement(55.4%). The combination of bust-hips-height measurements size codes were prefered by 13.3% . The pictogram was least premiered by the subjects. 3. The apparel items that subjects wanted to buy using mail-order were underwear, home -weat and night-wear. The heavy users of mail-order purchasing, however, also wanted to purchase expensive garments requiring precise fit. The subjects aged from 20's to 80's wanted to purchase childern's wear by mail. 4. The desire for diversity of garment item and size of mail-order apparel was relatively high. The subjets also wanted to purchase special size garments by mail-order, e. g., garment sizes for full or tall figure.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.5
• /
• pp.1-10
• /
• 2002

This study is based on user requirements before the implementation of B2B order and delivery systems. For accurate and easy understanding of the user's requirements I have expressed my specifications in graphical method and to make use of multiple diagrams, I have used UML. In these specifications, I have implemented B2B order and delivery systems with the use of XML, with company 'N' which is domestic aluminum manufacturer as the study object. The results of this study are as follows. First, both a developer and a user can understand the problems associated with specifying study objects through this system. Second, the communication between developers and users is more effective using this system. Third programming became easier because or the formalized specifications of this system. Fourth, this system facilitates the rapid handling of marketing department and stock management. Fifth, order and reservation management became more rapid and accurate through the use of this system. Sixth, this system can help nate B2B order and delivery systems that can be direct transactions. Seventh, this system helps to reduce purchasing costs by allowing for the rapid and simple order and delivery of raw materials. Finally, this study emphasized the advertising effect of an aluminum vessel.