• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.6
• /
• pp.337-342
• /
• 2018

Wave flume that enables generating water waves is a core research facility for physical experiment related to coastal engineering works. Recently, a new wave flume of 50 m length was constructed in Korea. The wave flume has a sloped section on its bottom. A novel wave generating system incorporating most-updated wave maker theory was introduced to the flume. In addition, water circulating system for adjusting water level was installed beneath the flume. These technical features and detailed specifications of the wave flume are described in this paper.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1992.08a
• /
• pp.114-117
• /
• 1992

2차원 수조에서 조파기를 정현파형으로 가동시키면 조파기에서 멀리 떨어진 점에서는 초기의 천이과정을 거쳐 상당한 시간이 경과한 다음 파고와 주기가 일정한 정현파가 전파되어 나간다. 초기의 천이과정에는 비교적 파장이 긴 파성분이 전파하며 감쇄하는데, 이 파성분은 정상파형과 다른 특성을 보인다.(중략)

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1991.07a
• /
• pp.69-72
• /
• 1991

2차원 수조에서 조파기를 정현파형으로 가동시키면, 조파기에서 멀리 떨어진 점에서는 초기의 천이과정을 거쳐 파고와 주기가 일정한 정면파가 전파되어 나간다. 초기의 천이과정에서는 비교적 파장이 긴 파성분이 전파하며 감쇄하는데, 이 파성분은 정상파형과 다른 특성을 보인다.(중략)

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1995.10a
• /
• pp.85-90
• /
• 1995

수조에서 조파기로 규칙파와 불규픽파를 발생하는 실험은 오래전부터 수행되었고, 최근에는 이를 수치계산으로 검증하려는 노력이 이루어지고 있다. 본 논문에서는 2차원 수조에서 조파판의 작동을 적절히 조절하여 임의의 지점에 plunger 형 쇄파를 발생시키고, 수치계산으로 이를 확인한 내용을 담았다. 쇄파를 만드는 연구는 Chan(1988)이 조화함수를 합성시키는 기법으로 실험을 수행한 바가 있고, Dommermuth 등(1988)이 이를 수치적으로 검증하였다. (중략)

• Journal of Ocean Engineering and Technology
• /
• v.27 no.4
• /
• pp.68-75
• /
• 2013

This paper investigates the characteristics of waves generated by a flap-type wave maker in a two-dimensional wave channel. Measurements are carried out for various water depths, wave heights, periods, and lengths capacitance-type wave height gages. The experimental results are shown to satisfy the dispersion relation of the linear wave theory. For waves with a small height and long period, the wave profiles agree well with those of the linear wave theory. However, as the wave height and period become higher and shorter, respectively, it is shown that the wave profiles measured in the present experiments are different from the linear wave profiles, and the measured wave heights are smaller than the target wave heights, which may be due to the non-linearity of the waves. As the wave progresses toward the channel end, the wave height gradually decreases. This reduction in the wave height along the wave channel is explained by the wave energy dissipation due to the friction of the side walls of the channel. The performance of the wave absorber in the channel is found to be acceptable from the results of the wave reflection tests.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.4
• /
• pp.375-388
• /
• 1994

When conducting movable bed tests in a narrow wave tank, the hydrodynamics and morphology are assumed to be two-dimensional; hence, any three-dimensional patterns such as cross-tank variations of the profiles are neglected or averaged to represent the mean profiles at the measuring time. In this paper, six movable bed tests were carried out with a fairly fine sand to investigate (1) whether or not three-dimensional features can occur in relatively narrow wave tanks, and (2) various possible interrelationships and causes of the three-dimensionality. These movable bed studies suggested that there was a relatively slow feedback between the hydrodynamics and the morphology that led to initiation and growth of 3-D morphological features, resulting in cross-tank profile variations under certain stages of profile development, especially when the profile approached an equilibrium with overall stability.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.526-526
• /
• 2016

고립파는 다른 파들과는 달리 파고만 주어지면 파형이 결정되고 변형 없이 장거리를 전파시켜 처오름높이를 가장 잘 재현할 수 있기 때문에 지진해일의 많은 연구에서 입사파로 사용되어 왔다. 본 연구에서는 한양대학교 수리학 및 해안공학 연구실에서 보유중인 서보-피스톤 타입 조파기로 고립파를 발생시켜 2차원 조파수조 내부에 설치되어있는 동해안 경사모형에서 각 수심 및 상대파고에 따른 고립파의 처오름높이 측정실험을 수행하였다. 다수의 파고계를 이용하여 각 구역에서 수심 및 상대파고에 따른 고립파의 파형을 측정하였고, 경사면에서 처오름높이 분포의 최대와 최소, 평균값을 측정하였다. 측정된 실험결과를 바탕으로 동해안에서의 고립파 처오름높이에 대해서 서술하였다.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.471-482
• /
• 2022

This study aims to investigate the characteristics of wave generation in a deep ocean engineering basin and to develop a meta-model of the transfer function of the wavemaker that reflects the geometric characteristics of the deep ocean engineering basin. To this end, the two-dimensional frequency domain boundary element method was applied to achieve an efficient analysis that reflects the geometric characteristics of the deep ocean engineering basin. The developed numerical method was validated through comparison with the analytical solution. Numerical analyses were conducted for the boundary value problem of the wavemaker according to various periods and the positions of the movable bottom. The numerical results were used to investigate the effect of the geometric characteristics of the deep ocean engineering basin on the transfer function of the wavemaker, and the effect of depth on wave generation was checked by changing the position of the movable bottom. To efficiently utilize the various results of the boundary element method, a meta-model, an approximate model of the transfer function of the wave maker, was developed using a thin plate spline interpolation model. The validity of the developed meta-model was confirmed through a comparison of the results of the model tests.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.40-48
• /
• 1999

Wave absorbing system is needed at various kinds of wave basins (wave flume, towing tank, square tank) for the model test related to the ocean engineering. In this paper, the performance of wave absorbing system with new concept is estimated throughout the experiments. Herein, the wave absorbing system is designed by punching plate with a given porosity which is installed horizontally and submerged near the water surface. As the incident wave generated by a wave maker advances above a punching plate, the strong jet flow is formed near a hole of punching plate. As a result, wave energy is dissipated into heat energy, Systematic model tests were conducted at KRISO to verify the performance of the wave absorber using a punching plate. It was found that the reflection coefficient of wave absorber is deeply dependent on both the porosity and the submerged depth of a punching plate. Inclined installation of a punching plate shows better performance than a horizontal one within a certain inclined angle.

• Journal of Korea Water Resources Association
• /
• v.45 no.6
• /
• pp.545-555
• /
• 2012

A numerical modeling has become increasingly popular and more important to the study of water waves with a rapid advancement of computer technology. However, different types of problems are induced during simulating wave motion. One of the key problems is re-reflection to a computation domain at the incident boundary. The internal wave generating-absorbing boundary conditions have been commonly used in numerical wave models to prevent re-reflection. For the Navier-Stokes equations model, the internal wave maker using a mass source function of the continuity equation has been used to generate various types of waves. Nonetheless, almost every numerical experiment is performed in two dimensions and only a few tests have been expanded to three dimensions. More recently, a momentum source function of the Boussinesq equations is applied to generate essentially directional waves in the three dimensional Navier-Stokes equations model. In this study, the internal wave maker using a momentum source function is employed to generate targeted linear waves in the three-dimensional LES model.