• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.170-179
• /
• 1993

결정성 고분자/비결정성 고분자/충격보강재의 조합으로 이루어진 열가소성 삼성분계 블렌드의 미세구조 조절이 기계적 및 열적 거시물성에 미치는 영향을 살펴보았다. 결정성 고분자로는 나일론6를 비결정성 고분자로는 변성폴리페닐린 옥사이드(PPO)를 충격 보강재 로는 스티렌-에틸렌부틸렌-스티렌(SEBS) 삼중블록 공중합체를 사용하였고 비상용인 나일 론6와 변성 PPO 사이의 상용화를 위해 반능 상용화(reactive compatibilization)방법을 사용 하였다. 반응 사용화에 사용된 반응기로는 나일론의 말단기에 있는 친핵성기인 아민기와 반 응성이 높은 친전자성기인 무수말레인산(MAH)을 충격보강 고부 SEBS에 그라프트시켜 충 격보강 고무내의 SEBS-MAH의 함량을 증가시킴에 따라 처음에 PPO 분산상에 있던 고무 가 나일론 연속상으로 이동하는 현상을 관찰하였다. 이러한 충격보강 고부의 SEBS-MAH 함량 증가에 의한 PPO 분산상에서 나일론상으로의 이동이 내충격성의 향상 및 내열성의 저 하와 밀접한 관계가 있다는 것을 알았다.

• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.116-124
• /
• 2006

Cloud-point data to $160^{\circ}C$ and 1,000 bar are presented with poly(ethylene-co-15.3 mole% octene) copolymers ($PEO_{15}$) in pure 1-octene and mixtures of ethylene - 1-octene. The cloud-point curves for $PEO_{15}$ - ethylene - 1-octene mixture dramatically increase in pressure to as high as 1,000 bar with an increasing ethylene concentration. At ethylene concentrations less than 18 wt%, the ternary mixture has bubble- and cloud-point curves. As the ethylene concentration of the ternary mixture increases, the bubble-point curve and the single-phase region reduce. The reduction in the single phase region with increasing ethylene concentrations is the result of reduced dispersion interactions between $PEO_{15}$ and the mixed solvent. The single-phase region decreases with increasing temperatures when ethylene concentrations are lower than 36 wt%, whereas the single-phase region increases with temperatures at ethylene concentrations greater than 50 wt%. At ethylene concentrations greater than 50 wt% the effect of the polar interactions of the mixed solvent, which is unfavorable to dissolve PEO, is greater than the effect of the density of the mixed solvent. Therefore, the cloud-point pressures increase with a decreasing temperature. However, at ethylene concentrations less than 50 wt%, the cloud-point pressures decrease with temperature, because the effect of the polar interactions is less than the density effect.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.190-197
• /
• 2020

This paper evaluates the mechanical properties and durability of cement matrix blended with mineral admixtures and ferronickel slag(FNS) powder which is an industrial b y-product during ferronickel smelting process. The hydration heat, pore structure, compressive strength, length change, rapid chloride penetration test(RCPT), and freezing and thawing resistance of ternary blended cement matrix were investigated and compared with ordinary portland cement matrix. The result showed that the compressive strength of ternary blended cement matrix using ferronickel slag powder and mineral mixture was low in strength compared to the reference concrete, but recovered to a certain extent by using alkali activator. Length change of cement mortar using FNS powder have shown less shrinkage occurs than the reference specimen. In addition, irrespective of using the alkali-activators, all ternary mix are indicative of the 'very low' range for chloride ion penetrability according to the ASTM C 1202, and the freeze-thaw resistance also showed excellent results.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.166-172
• /
• 1999

Fixed-bed adsorption of metal ions on chitosan bead was studied to remove heavy metal ions in waste water. Chitin was extracted from carb shell and chitosan was prepared by deacetylation of the chitin. The chitosan in bead was used as an adsorbent for heavy metal ions. Freundlich and Langmuir isotherm was determined from the experimental results of equilibrium adsorption for individual metal ion ($Cu^{2+}$, $Co^{2+}$, $Ni^{2+}$) on chitosan bead. Adsorption strength of metal ions decreased in the order of $Cu^{2+}$>$Co^{2+}$>$Ni^{2+}$ ion. Breakthrough curves of single and multicomponent adsorption for metal ions were obtained from the experimental results of fixed-bed adsorption. The breakthrough curves were analyzed by simulation with fixed-bed adsorption equation based on LDFA (linear driving force approximation) adopted LAS (ideal adsorbed solution) theory which can predict multi-component adsorption isotherm from individual adsorption isotherm. The behavior of fixed bed adsorption for single and multi-component system could be nicely simulated by the equation.

• Journal of Biosystems Engineering
• /
• v.21 no.2
• /
• pp.198-207
• /
• 1996

To measure the moisture content, protein and viscosity of brown and milled rice with Near Infrared Reflectance(NIR) analyzer, the comparison and analysis of the data from the chemical analysis and NIR analyzer were conducted. The purpose of this study is to find out the fundamental data required for the prediction of rice qualify and taste rank, and to develop a measuring method of constituents and physical characteristics of domestic rice with NIR analyzer. The important results can be summarized as follows. 1. The $r^2$ and SEC of moisture calibration from brown rice powder were 0.87 and 0.09 respectively, those of milled rice powder were 0.95 and 0.08 respectively. 2. The $r^2$ and SEC of protein calibration from brown rice powder were 0.83 and 0.20 respectively, those of milled rice powder were 0.86 and 0.20 respectively. 3. The $r^2$ and SEC of viscosity calibration from brown rice powder were 0.36 and 15.50 respectively, those of milled rice powder were 0.55 and 12.98 respectively. Further study is required to develop better prediction model for viscosity. It is necessary the continuous study including wavelength selection, because $r^2$ is small for practical use. 4. The regression equation for one rice variety was nearly coincident with other. Therefore, it is required that the prediction model should be developed for the all rice samples.

• Clean Technology
• /
• v.19 no.1
• /
• pp.8-12
• /
• 2013

Phase behavior of carbon dioxide + surfactant binary system and carbon dioxide + surfactant + water ternary system was investigated at the temperatures from 318 K to 348 K by using high pressure vapor liquid equilibrium apparatus containing variable-volume view cell. Sorbitan monopalmitate was used as the surfactant. The cloud point pressures for the binary mixture of carbon dioxide + sorbitan monopalmitate increased with an increasing of system temperatures and the maximum cloud point pressure was observed at the composition of 0.226 wt% of sorbitan monopalmitate. On the other hand, as the temperatures and compositions of water increased, the cloud point pressures for ternary system containing 0.1 wt% of sorbitan monopalmitate increased significantly. For the ternary system of constant 0.2 wt% of water, the cloud point pressure curves show relatively flat according to the change of compositions of surfactant. The cloud point pressures increased when the temperatures and compositions of water increased.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.573-579
• /
• 1994

1-O-oleoyl glycerol, 2-O-oleoyl myo-inositol and methyl 2-O-oleoyl-${\alpha}$-D-glucopyranoside were used as surfactants in this study. The solution properties and solubilization process of those nonionic surfactants were examined by the phase equilibria. As a result of this study, we have found that phase behavior of two component systems of surfactants/$H_2O$/cyclohexane depends on temperature respectively. The three phase regions of three component systems appeared in the temperature range of $27^{\circ}C{\sim}32^{\circ}C$, $36^{\circ}C{\sim}45^{\circ}C$ and $38^{\circ}C{\sim}52^{\circ}C$ and solubilization of water and oil was high in those three phase ranged As the temperature was varied in the two component systems, liquid crystals of hexagonal were observed to in the case of 1-O-oleoyl glycerol, and liquid crystal of lamella types were observed in the case of 2-O-oleoyl myo-inositol and methyl 2-O-oleoyl-${\alpha}$-D-glucopyranoside.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.103-105
• /
• 2020

본 논문은 저압 배전선로의 전압 조정을 위해 상태관측기와 반복제어기를 적용한 무효전력 제어 알고리즘을 제안하였으며, 시뮬레이션 및 실험으로 이를 검증하였다. 무효전력 보상기는 단상 풀 브리지 인버터 구조이며 전압제어 시 DC 전압을 일정하게 유지하기 위한 전압 제어와 전류 제어기로 구성된다. DC 리플 보상방식은 상태관측기로 만들어낸 출력 값, DC 링크 리플 성분을 보상한 값을 전압제어기 피드백 성분으로 사용하여 전압을 일정하게 제어하였다. 무효전력을 안정하게 주입하기 위해 기본파 성분은 PI제어기로 제어하고 반복제어기를 PI제어기와 병렬로 연결하여 저차 고조파를 보상하였다. 반복 제어기는 동기 좌표계에서 구현됨에 따라 홀수파 고조파 성분을 제거하는 역할을 한다. 제안한 제어기법은 5kVar 단상 인버터 시스템으로 실험을 진행하였으며, 상태관측기와 반복제어기가 적용된 경우 THD가 9%에서 2%로 향상됨을 확인함으로써 제안한 알고리즘의 성능을 검증하였다.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.3
• /
• pp.7-12
• /
• 1999

In this paper, dielectric and strain properties of (1-f-y)PMN-yPT-xST ceramics investigated with the amount of $\textrm{SrTiO}^3$(ST). The $\textrm{SrTiO}^3$ content is ranged within 1~6㏖%. Another compositions with excess MgO also investigated. As the amount of ST is increased, dielectric constant has a maximum value at 5㏖% composition. The Curie temperature is decreased linearly with increasing the amount of ST. Coercive field and ramnant polarization has a maximum value at l㏖% composition. As for the effects of excess MgO, the dielectric constant has been increased by the addition of excess MgO up to 3㏖% to a 0.8PMN-0.12PT-0.04ST specimen. But the strain has been decreased by the addition of excess MgO.

• Electrical & Electronic Materials
• /
• v.10 no.3
• /
• pp.210-216
• /
• 1997

The th ermal and optical properties of multicomponent oxide glass optical fiber by adding heavy metal oxide Ga$_{2}$O$_{3}$(0-20wt%) were investigated. The fiber samples were made by the method of rod in tube. The optical loss of fiber was measured in 0.3-1.8.mu.m wavelength region. As Ga$_{2}$O$_{3}$ increased up to 20wt%, the transition and softening temperature of bulk glass were increased from 495.deg. C to 579.deg. C and from 548.deg. C to 641.deg. C, respectively. Whereas the thermal expansion coefficient was decreased from 102 to 79.1x10$^{-7}$ /.deg. C. The refractive index was increased from 1.621 to 1.665, and IR cut-off wavelength was enlarged from 4.64.mu.m to 6.1.mu.m. The optical loss of fiber was remarkably decreased in 1.146.mu.m-1.8.mu.m wavelength region.