• Journal of Korean society of Dental Hygiene
• /
• v.3 no.1
• /
• pp.1-12
• /
• 2003

The purpose of this study was to verify the reliability of the instrument and to analyze the contents of the humor. This study was conducted from December 16th, 2002 to January 13th, 2003, centering on Busan Dental Hospital & public health service. A total of 193 questionnaires was distributed for the survey. The result were as followings: 1. There were significant differences in humor values concerning age(F=1l.44, p=0.000), marriage(t= -3.556, p=0.000), education(F=14.83, p=0.000), clinical carrier(F=9.99, p=0.000), status(F=5.83, p=0.001), working place(F=7.39, p=0.000), and living parents(F=3.65, p=0.014). Humor values were higher for over-forties, married dental hygienists, public health service worker and no living parents. 2. There were no Significant correlation between stress and the dental hygienist's humor values. 3. There were significant differences in humor values concerning sources of the dental hygienist's humor. Data related "book/mass media"(t=-6.32, p=0.000), "conversation" (t=-12.05, p=0.000) and "daily life"(t=-10.33, p=0.000) are examples of these sources. 4. There were no significant differences in humor values concerning the dental hygienist's humor degree related frequency of used humor. 5. There were significant differences in humor values concerning the type of humor used, "word humor"(t=-7.00, p=0.000), "imitation"(t=2.68, p=0.008), "adequate situation" (t=-8.03, p=0.000), "technical terms"(t=6.65, p=0.000) pertain to this. 6. There were Significant differences in humor values concerning the time of using humor expression, "loose situation"(t=-3.75, p=0.000), "tired situation"(t=4.01, p=0.000), "tense situation"(t=5.37, p=0.000), "adequate situation"(t=-16.03, p=0.000) pertain to this.

• Earthquakes and Structures
• /
• v.12 no.1
• /
• pp.67-77
• /
• 2017

In this paper, it is aimed to present a comparative study about the structural behavior of tall buildings consisting of different type of materials such as concrete, steel or timber using finite element analyses and experimental measurements on shaking table. For this purpose, two 1/60 scaled 28 and 30-stories wooden building models with $40{\times}40cm$ and $35{\times}35cm$ ground/floor area and 1.45 m-1.55 m total height are built in laboratory condition. Considering the frequency range, mode shapes, maximum displacements and relative story drifts for structural models as well as acceleration, displacement and weight limits for shaking table, to obtain the typical building response as soon as possible, balsa is selected as a material property, and additional masses are bonded to some floors. Finite element models of the building models are constituted in SAP2000 program. According to the main purposes of earthquake resistant design, three different earthquake records are used to simulate the weak, medium and strong ground motions. The displacement and acceleration time-histories are obtained for all earthquake records at the top of building models. To validate the numerical results, shaking table tests are performed. The selected earthquake records are applied to first mode (lateral) direction, and the responses are recorded by sensitive accelerometers. Comparisons between the numerical and experimental results show that shaking table tests are enough to identify the structural response of wooden buildings. Considering 20%, 10% and 5% damping rations, differences are obtained within the range 4.03-26.16%, 3.91-65.51% and 6.31-66.49% for acceleration, velocity and displacements in Model-1, respectively. Also, these differences are obtained as 0.49-31.15%, 6.03-6.66% and 16.97-66.41% for Model-2, respectively. It is thought that these differences are caused by anisotropic structural characteristic of the material due to changes in directions parallel and perpendicular to fibers, and should be minimized using the model updating procedure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6317-6323
• /
• 2013

The aim of this study was to determine the association between the Body Mass Index (BMI), weight perception and depression-like symptoms in Korean middle school students. The data was obtained from the 2012 Korea Youth Risk Behavior Web-based Survey. The subjects were 37,297 students living in the community. Adjusting for covariates (sex, school year, home economics, city-type, school record, self-reported happiness, self-reported health status, suicidal thinking, smoking, alcohol consumption), the self-reported obesity (OR=1.14, 95% CI: 1.06-1.22) and self-reported underweight (OR=1.11, 95% CI: 1.03-1.20), compared to the self-reported healthy weight, were more likely to have depression-like symptoms. On the other hand, the BMI-based weight was not associated independently with depression-like symptoms. These findings suggest that weight perception is significantly associated with depression-like symptoms.

• Journal of Digital Convergence
• /
• v.12 no.6
• /
• pp.355-363
• /
• 2014

The purpose of this study was to identify and describe attitudes and beliefs that might act as barriers to addressing patient sexuality concerns and to determine the extent to which these attitudes and beliefs are influenced by personal factors such as age, gender, education. The Sexuality Attitudes and Beliefs Survey was used to assess nursing students(N=214). Important barriers to addressing patient sexuality reported by the majority of the students included not making time to address the concerns (86.9%) and Feeling confident in ability to address patients' sexual concerns(76.2%). A statistically significant difference was found in scores based on sex(p=0.03) and religion(p=0.02). Results of this study have implications for educational programs in dealing with patient sexuality.

• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.528-534
• /
• 2006

The purpose of this paper is to investigate the optimal operating condition for the hydrogen production by biogas reforming using the plasmatron induced thermal plasma. The component ratio of biogas($CH_4/CO_2$) produced by anaerobic digestion reactor were 1.03, 1.28, 2.12, respectively. And the reforming experiment was performed. To improve hydrogen production and methane conversion rates, parametric screening studies were conducted, in which there are the variations of biogas flow ratio(biogas/TFR: total flow rate), vapor flow ratio($H_2O/TFR$: total flow rate) and input power. When the variations of biogas flow ratio, vapor flow ratio and input power were 0.32~0.37, 0.36~0.42, and 8 kW, respectively, the methance conversion reached its optimal operating condition, or 81.3~89.6%. Under the condition mentioned above, the wet basis concentrations of the synthetic gas were H2 27.11~40.23%, CO 14.31~18.61%. The hydrogen yield and the conversion rate of energy were 40.6~61%, 30.5~54.4%, respectively, the ratio of hydrogen to carbon monoxide($H_2/CO$) was 1.89~2.16.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.58-65
• /
• 2013

It's introduced a BLA(Branch Loop Antenna) that is modified from conventional loop, and verified antenna performances for applying to mobile handset. Branch elements are added to a rectangular loop, and low resonance is obtained by the length of the branch line. When resonance frequency of a single loop is 2.5GHz, BLA had near 900 MHz under the same antenna size. Multiple resonances are established by the locations of branch connection and their lengths. By the implementation and measurement for the dual band BLA, it's showed 75MHz -10dB bandwidth and -3.03~-1.46dBi average gains with 49.73~71.39% efficiencies at GSM900 band, and 90MHz -6dB bandwidth and -8.14~-2.17dBi average gains with 15.34~60.62% efficiencies at DCS1900 band. And H-plane radiation patterns were omni-directional. These performances are good for the mobile handset antenna.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.226-233
• /
• 2012

In this paper, we propose a 'linear approximation method' which is an accelerated BER (Bit Error Rate) test method for high speed interfaces, based on an analytical BER model. Both the conventional 'Q-factor estimation method' and 'linear approximation method' can predict a timing margin for $10^{-13}$ BER with an error of about 0.03UI. This linear approximation method is implemented on a hardware as an accelerated Built-In Self Test (BIST) with an internal BERT (BET Tester). While a direct measurement of a timing margin in a 3Gbps interface takes about 5.6 hours with $10^{-13}$ BER requirement and 95% confidence level, the accelerated BIST estimates a timing margin within 0.6 second without a considerable loss of accuracy. The test results show that the error between the estimated timing margin and the timing margin from an actual measurement using the internal BERT is less than 0.045UI.

• Journal of East-West Nursing Research
• /
• v.17 no.2
• /
• pp.96-102
• /
• 2011

Purpose: Patient-controlled epidural analgesia (PCEA) is an effective method for controlling post surgical pain. However, it is associated with adverse drug reactions such as nausea and vomiting. In this, study we tested the effects of Nei-Guan (P6) acupressure on PCEA-associated nausea, vomiting, and pain in geriatric patients after total knee replacement arthroplasty (TKRA). Methods: Ninety-nine patients who had TKRA for the first time were randomly assigned to either, experiment group (n=50) or control groups (n=49). All patients received PCEA immediately after surgery, but acupressure on Nei-Guan (P6) point was applied to experiment group only. Ten minutes of finger acupressure on Nei-Guan (P6) acupressure point was applied twice with 15 minute-interval in the experiment group. The incidence of nausea, vomiting, and retching as well as pain intensity were assessed at 12 and 24 hours after surgery. Nausea, and vomiting were assessed by Index of Nausea, Vomiting and Retching (INVR) questionnaire. Pain intensity was measured with frequency of analgesics. Results: Vomiting both was significantly different between two groups at 12 hours (t=-2.18, p=0.03) and 24 hours (t=-2.64, p=0.01) after surgery. Total scores of nausea, vomiting and retching in experimental group was significantly lower than control group 24hours after surgery (t=-2.18, p=0.03). However, pain was not different between two groups. Conclusion: Nei-Guan (P6) acupressure may be considered as an effective nursing intervention to decrease PCEA-associated nausea and vomiting in older patients after TKRA.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.973-981
• /
• 2005

A modified half wavelength loaded line antenna is designed and implemented for mobile terminal applications. The antenna is constructed with a radiating element of half wavelength loaded line structure, dielectric substrate, feeding post and two shorting posts on the experimental PCB. The shorting posts are located at each side of the radiating element and lumped inductance elements are on between each shorting post and ground of PCB. By controlling value of inductors, one can adjust resonant frequency and input impedance respectively. Within inductance value of 12 nH, the antenna can have wide operating range of $1,470\~2,660\;MHz$ and good impedance matching. The measured peak gains are between -0.45 dBi and 2.03 dBi for the operating band.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.1803-1808
• /
• 2012

This study aimed to investigate the effects of Ser/Cys polymorphism in hOGG1 gene, Arg/Pro polymorphism in p53 gene, smoking and their interactions on the development of lung cancer. Ser/Cys polymorphism in hOGG1 and Arg/Pro polymorphism in p53 among 124 patients with lung cancer and 128 normal people were detected using PCR-RFLP. At the same time, smoking status was investigated between the two groups. Logistic regression was used to estimate the effects of Ser/Cys polymorphism and Arg/Pro polymorphisms, smoking and their interactions on the development of lung cancer. ORs (95% CI) of smoking, hOGG1 Cys/Cys and p53 Pro/Pro genotypes were 2.34 (1.41-3.88), 2.12 (1.03-4.39), and 2.12 (1.15-3.94), respectively. The interaction model of smoking and Cys/Cys was super-multiplicative or multiplicative, and the OR (95% CI) for their interaction item was 1.67 (0.36 -7.78). The interaction model of smoking and Pro/Pro was super-multiplicative with an OR (95%CI) of their interaction item of 5.03 (1.26-20.1). The interaction model of Pro/Pro and Cys/Cys was multiplicative and the OR (95%CI) of their interaction item was 0.99 (0.19-5.28). Smoking, hOGG1 Cys/Cys, p53 Pro/Pro and their interactions may be the important factors leading to the development of lung cancer.