• 자원환경지질
• /
• 제37권4호
• /
• pp.413-424
• /
• 2004

한반도의 북중국/남중국지괴와의 연계성 및 충돌의 영향을 근거로 한반도의 지체구조적 진화를 알아보기 위하여 경기육괴에 분포하는 중생대 대동누층군과 원생대 변성암인 서산층군에 대하여 고지자기 연구를 수행하였다. 대동누층군에 대해서는 26개 지점 239개의 시료 중 14개 지점 106개의 시료에서 생성당시의 특성잔류자화 방향을 추출하였다. 특성잔류자화 방향은 경사보정 후 평균방향이 D/I=74.5$^{\circ}$/36.7$^{\circ}$(k=60.7, $\alpha$=5.1$^{\circ}$)이며 이는 경사보정 전의 방향 D/I=61.9$^{\circ}$/52.8$^{\circ}$(k=4.4, $$\alpha$_{95}$=21.5$^{\circ}$)보다 집중된 분포를 나타내므로 암석생성당시 획득된 일차자화임을 지시한다. 경사보정 후의 방향으로부터 계산한 고지자기극은 208.0$^{\circ}$E, 24.5$^{\circ}$N (n=14, K=67.5,$A_{95}$=4.9$^{\circ}$)에 위치하며 중기 트라이아스기 남중국지괴의 고자기극과 통계학적으로 유사하므로 이 기간 동안 대동누층군은 남중국지괴와 지구조적으로 동일했던 것으로 해석되며 남중국지괴와 한반도의 충돌에 따른 변형$.$변성작용에도 일차자화가 보존되었음을 지시한다. 서산층군의 33개 지점에서 채취한 279개 시료의 대부분은 분산된 방향을 나타내며, 오직 쥬라기 화강암 주변의 6개 지점에서 채취한 36개의 시료로부터 특성잔류자화 방향을 추출하였다. 이와 같은 결과는 경기육괴의 최대 변성시기인 북중국/남중국지괴와의 충돌과 연관된 고생대 말기에서 중생대 쥬라기 시기의 지구조 운동의 영향으로 추측된다. 지층경사보정 이전의 잔류자화 방향은 D/I=45.7$^{\circ}$/60.1$^{\circ}$(k=41.2, $$\alpha$_{95}$=10.6$^{\circ}$)이며 이로부터 구해진 고지자기극의 위치는 195.0$^{\circ}$E, 51.6$^{\circ}$N(n=6, K=20.8,$A_{95}$=12.4$^{\circ}$)로서 한반도 쥬라기 또는 백악기 초의 고지자기극과 유사하다. 그러나 서산층군의 특성잔류자화 방향은 조산운동의 직접적인 영향보다는 조산운동 후기 또는 이후에 쥬라기 대보화강암의 정치와 연관되어 획득된 재자화 방향으로 해석하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.498-504
• /
• 2012

The water-cooled Permanent Magnet Linear Synchronous Motor (PMLSM) has a wide range of applications due to high efficiency, high thrust force density and high acceleration. In order to ensure normal operation and maximum output, both the magnetic and thermal performance are vital to be considered. Based on ANSYS software, electromagnetic and thermal finite-element analysis (FEA) models of a 14-pole, 12-slot water-cooled PMLSM are erected adopting suitable assumptions. Firstly, the thrust force and force ripple with different current densities are calculated. Secondly, the influence of different water flow on the motor heat dissipation and force performance under different operationional conditions are investigated and optimized. Furthermore, for continuous operation, the temperature rise and thrust feature are studied under the rated load 8A, the proper temperature $120^{\circ}C$ and the limited temperature $155^{\circ}C$. Likewise, for short-time operation, the maximum duration is calculated when applied with a certain large current. Similarly, for intermittent operation, load time as well as standstill time are determined with the optimal current to achieve better thrust performance.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2284-2291
• /
• 2018

This paper deals with optimum design of surface mounted permanent magnet synchronous motor (SPMSM) for automotive component. For a compact system structure, it was designed as a motor with a 14-pole 12-slot concentrated winding and hollow shaft. The motor is a thin type structure which stator outer diameter is relatively large compared to its axial length and is designed to have a high magnetic saturation for increasing the torque density. Since the high magnetic saturation in the stator core increases the axial leakage flux, a 3-dimensional (3-D) finite element analysis (FEA) is indispensable for torque analysis. However, optimum designs using 3-D FEA is inefficient in terms of time and cost. Therefore, equivalent 2-D FEA which is able to consider axial leakage flux is applied to the optimization to overcome the disadvantages of 3-D FEA. The structure for cost reduction is proposed and optimum design using equivalent 2-D FEA has been performed.

• 한국ITS학회 논문지
• /
• 제14권1호
• /
• pp.1-12
• /
• 2015

매설형 검지기는 검지 성능이 타 검지기에 비해 우수하지만, 설치 및 관리비용이 클 뿐 아니라 도로의 재포장이나 도로파손으로 인해 수명이 짧다는 단점이 있다. 이에 반해 기존 지주에 부착하여 사용하는 검지시스템인 비매설형검지기는 도로 노면을 손상시키지 않기 때문에 설치가 쉽고, 유지관리비용이 적다는 장점이 있다. 비매설식 검지기는 이러한 장점에도 불구하고, 검지 성능이 낮아 아직까지 신호제어용으로 사용하지 못하는 실정이다. 본 연구에서는 비매설형검지기 중에 정확도가 가장 높은 FMCW 방식의 레이더에 대해 성능평가를 수행하고, 신호제어용 검지용도별로 현장적용 유/무 결과를 제시하였다.

• 한국콘텐츠학회논문지
• /
• 제14권12호
• /
• pp.639-654
• /
• 2014

창극 <변강쇠 점 찍고 옹녀>는 '서사화'의 중심인물인 옹녀와 옹녀모에 의해 생성된 이야기가 억압받는 성 여성으로부터의 해방이라는 것이 주목을 끈다. 원형 및 파생 콘텐츠에서 풀리지 않던 매듭인 작품 후반부(강쇠의 치상 삽화들)를 삭제하고, 완강한 가부장제의 권위를 희석시켜 불멸의 사랑과 사랑의 결실을 도출하며, 사건의 '핵'인 옹녀의 상부살과 강쇠의 장승동티살의 연결 고리를 끊음과 동시에 사건의 '촉매'인 조왕살을 등장시켜 가부장제의 권위에 도전함으로써 '허구화'의 미적 구조물인 장승과의 전쟁을 구축하고, 여성의 자유 의지와 저항 정신으로 사랑도 명예도 생명도 얻는 플롯 라인을 형성하여 전형 서사로서 완결성을 지니게 되었다. 이 창극의 작창 작곡은 다양한 음악의 자유분방한 활용, 주인공 옹녀의 독창 극대화, 합창에 의한 '부분의 독자성' 강화, 장면전환에서의 극적 분위기 조성, 긴장(저항)과 이완(자유)의 이중 변주 등에서 괄목할 성과를 얻었다.

• Archives of Plastic Surgery
• /
• 제39권6호
• /
• pp.601-605
• /
• 2012

Background Cryptotia is a congenital ear deformity in which the upper pole appears buried beneath the mastoid skin. Cryptotia is a common auricular malformation among Asians. The aim of this paper is to examine the surgical techniques for and complications of 34 cryptotic patients. Methods Surgery was performed for 34 cryptotic deformities (January 2005 to January 2012). Twenty-two patients (64.7%) were classified as having type I cryptotia, and 12 patients (37.5%) type II cryptotia. Among the type I cryptotia patients, 8 patients had mild deformity and 14 severe deformity. Among the type II cryptotia patients, 10 patients had mild deformity and 2 severe deformity. Results The mild deformities were corrected via Z-plasty, V-Y plasty, full-thickness skin graft, and transposition flap, while the severe deformities were corrected via cartilage graft or Medporfor the spread of cartilage adhesion of antihelix. There were two cases of reinvagination in the autologous cartilage graft group. Implant exposure occurred with Medpor (two cases). There were two cases of hypertrophic scar on the previous surgical wound with Medpor. There were no complications in the 18 patients who had mild deformities. Conclusions The type I cryptotia patients had more severe deformities than the type II cryptotia patients. As most of the type II cryptotia patients had only mild deformities, their deformities were corrected without using autologous conchal cartilage graft or Medpor, except for two patients. Through more case analyses, researchers should make an effort to identify methods for recurrence and prevention of complication.

• Journal of Astronomy and Space Sciences
• /
• 제32권1호
• /
• pp.51-62
• /
• 2015

I investigated a method for drawing the star chart in the planisphere Cheonsang-yeolcha-bunyajido. The outline of the star chart can be constructed by considering the astronomical information given in the planisphere alone and the drawing method described in Xin-Tangshu; further the chart can be completed by using additional information on the shape and linking method of asterisms out of an inherited star chart. The circles of perpetual visibility, the equator, and the circle of perpetual invisibility are concentric, and their common center locates the Tianshu-xing, which was defined to be a pole star in the Han dynasty. The radius of the circle of perpetual visibility was modified in accordance with the latitude of Seoul, whereas the other circles were drawn for the latitude of $35^{\circ}$, which had been the reference latitude in ancient Chinese astronomy. The ecliptic was drawn as an exact circle by parallel transference of the equator circle to fix the location of the equinoxes at the positions recorded in the epitaph of the planisphere. The positions of equinoxes originated from the Han dynasty. The 365 ticks around the boundary of the circle of perpetual invisibility were possibly drawn by segmenting the circumference with an arc length instead of a chord length with the ratio of the circumference of a circle to its diameter as accurate as 3.14 presumed. The 12 equatorial sectors were drawn on the boundary of the star-chart in accordance with the beginning and ending lodge angles given in the epitaph that originated from the Han dynasty. The determinative lines for the 28 lunar lodges were drawn to intersect their determinative stars, but seven determinative stars are deviated. According to the treatises of the Tang dynasty, these anomalies were inherited from charts of the period earlier than the Tang dynasty. Thus, the star chart in Cheonsang-yeolcha-bunyajido preserves the old tradition that had existed before the present Chinese tradition reformed in approximately 700 CE. In conclusion, the star chart in Cheonsang-yeolcha-bunyajido shows the sky of the former Han dynasty with the equator modified to the latitude of Seoul.

• 헤리티지:역사와 과학
• /
• 제46권2호
• /
• pp.70-95
• /
• 2013

건륭(乾隆) 3년(1569)에 제작된 일본 교토(京都) 고려(高麗)미술관 소장의 <치성광여래강림도(熾盛光如來降臨圖)>는 조선 전기 치성광여래강림도상으로는 현재 유일한 것이다. 보존상태가 양호하여 작품 내 거의 모든 도상과 旁題銘의 판독이 가능한 상태이며 화기 부분도 크게 손상되지 않았다. 작품은 홍색을 올린 바탕에 금니화로 $84.8{\times}66.1cm$의 비교적 작은 크기의 불화이다. 이 작품은 화면 중앙 치성광여래를 중심으로 하여 존명이 적혀 있지 않은 양대보살, 십일요(十一曜)와 천황성(天皇星), 옥황상제(玉皇上帝) 및 이십팔숙(二十八宿), 황도십이궁(黃道十二宮), 삼태육성(三台六星), 북두칠성(北斗七星) 등이 배치되어 조선시대 성수신앙의 일 단면을 살펴볼 수 있는 좋은 자료가 되고 있다. 이 작품의 도상은 고려본 치성광여래강림도와 같은 계열이기는 하지만 일부 성수에서 자미성, 천황성과 같은 도교적 성수가 등장하고 여래형 북두칠성 등 의미있는 도상변화가 나타나고 있어 조선시대 성수신앙의 전개과정을 알 수 있다. 본 <치성광여래강림도>는 주요 권속으로 십일요가 중심이 되긴 하였으나 계도성이 생략되고 월패성도 중심에서 벗어나 있어 십일요 구성에 대한 개념은 약화되고 있음을 알 수 있었다. 그리고 자미성, 옥황대제, 천황제와 같은 도교의 성수신이 포함되면서 도교와 불교 성수신의 뚜렷한 구분이 없어지는 현상도 나타나고 있다. 이 불화에 나타난 이십팔수의 별자리 그림은 중국의 치성광여래도와는 달리 우리나라 천문도의 별자리 그림을 정확히 반영하고 있어 성수신앙의 독자성도 엿볼 수 있었다. 북두칠성과 칠원성군을 동시에 그려서 칠성신앙을 강조한 사실은 칠성신앙의 중요도가 점차 높아지고 있음을 반영하는 것으로 해석할 수 있다. 또한 작품의 제작 수준으로 보아 대시주 '최씨도령(崔氏徒令)'은 유복한 계층의 어린아이일 가능성이 높아, 이 작품이 자손의 연명(延命), 소재(消災) 등을 기원하면서 제작된 호신부적 성격의 불화였을 것으로 추정해볼 수 있었다.

• Archives of Reconstructive Microsurgery
• /
• 제16권1호
• /
• pp.1-5
• /
• 2007

The purpose of this article to evaluate the availability of the rectus femoris flap in Korean subjects. Material and Methods is that Cadaveric dissections were done on 51 femoral triangles of 26 cadevers. We measured the length of the direct head of rectus femoris from anterior superior iliac spine to patella upper pole, ASIS to lateral border of femoral nerve, and entry point of femoral nerve and vessel branches to rectus. Usually, there were three terminal branches to rectus femoris from the femoral nerve. The entry point of the first branch was at the proximal $17.5{\sim}31.4%$ portion of the rectus femoris. The second and the third branch entered at the proximal $22.5{\sim}40.7%$ and $26.3{\sim}42.3%$, respectively. The vessel entry was at $20.2{\sim}37.3%$. The length from ASIS to femoral nerve was $3.5{\sim}8.5\;cm$. Among the 51 rectus femoris muscles, 44 had one nutrient artery, and 7 had 2 nutrient arteries. The nutrient artery originated from the descending branch of the lateral femoral circumflex artery in 18(40.9%) cases, directly from the lateral femoral circumflex artery in 8(18.0%) cases, and from proximal(6 cases, 13.6%) and distal(12 cases, 27.3%) portion of the deep femoral artery. The average length of the nutrient artery was 29.8 mm and the width was 2.14 mm. The point where it meets the main feeding artery of the rectus femoris was $9.0{\sim}15.0\;cm$ from the ASIS. In all cases, the main artery's entrance was proximal to the first nerve branch. Conclusion is that rectus femoris has available data for functional flap.

• 수산해양기술연구
• /
• 제32권1호
• /
• pp.33-41
• /
• 1996

In order to obtain the most favourable classification system for fishing gears, the problems in the existing systems were investigated and a new system in which the fishing method was adopted as the criterion of classification and the kinds of fishing gears were obtained by exchanging the word method into gear in the fishing methods classified newly for eliminating the problems was established. The new system to which the actual gears are arranged is as follows ; (1)Harvesting gear \circled1Plucking gears : Clamp, Tong, Wrench, etc. \circled2Sweeping gears : Push net, Coral sweep net, etc. \circled3Dredging gears : Hand dredge net, Boat dredge net, etc. (2)Sticking gears \circled1Shot sticking gears : Spear, Sharp plummet, Harpoon, etc. \circled2Pulled sticking gears : Gaff, Comb, Rake, Hook harrow, Jerking hook, etc. \circled3Left sticking gears : Rip - hook set line. (3)Angling gears \circled1Jerky angling gears (a)Single - jerky angling gears : Hand line, Pole line, etc. (b)Multiple - jerky angling gears : squid hook. \circled2Idly angling gears (a)Set angling gears : Set long line. (b)Drifted angling gears : Drift long line, Drift vertical line, etc. \circled3Dragged angling gears : Troll line. (4)Shelter gears : Eel tube, Webfoot - octopus pot, Octopus pot, etc. (5)Attracting gears : Fishing basket. (6)Cutoff gears : Wall, Screen net, Window net, etc. (7)Guiding gears \circled1Horizontally guiding gears : Triangular set net, Elliptic set net, Rectangular set net, Fish weir, etc. \circled2Vertically guiding gears : Pound net. \circled3Deeply guiding gears : Funnel net. (8)Receiving gears \circled1Jumping - fish receiving gears : Fish - receiving scoop net, Fish - receiving raft, etc. \circled2Drifting - fish receiving gears (a)Set drifting - fish receiving gears : Bamboo screen, Pillar stow net, Long stow net, etc. (b)Movable drifting - fish receiving gears : Stow net. (9)Bagging gears \circled1Drag - bagging gears (a)Bottom - drag bagging gears : Bottom otter trawl, Bottom beam trawl, Bottom pair trawl, etc. (b)Midwater - drag gagging gears : Midwater otter trawl, Midwater pair trawl, etc. (c)Surface - drag gagging gears : Anchovy drag net. \circled2Seine - bagging gears (a)Beach - seine bagging gears : Skimming scoop net, Beach seine, etc. (b)Boat - seine bagging gears : Boat seine, Danish seine, etc. \circled3Drive - bagging gears : Drive - in dustpan net, Inner drive - in net, etc. (10)Surrounding gears \circled1Incomplete surrounding gears : Lampara net, Ring net, etc. \circled2Complete surrounding gears : Purse seine, Round haul net, etc. (11)Covering gears \circled1Drop - type covering gears : Wooden cover, Lantern net, etc. \circled2Spread - type covering gears : Cast net. (12)Lifting gears \circled1Wait - lifting gears : Scoop net, Scrape net, etc. \circled2Gatherable lifting gears : Saury lift net, Anchovy lift net, etc. (13)Adherent gears \circled1Gilling gears (a)Set gilling gears : Bottom gill net, Floating gill net. (b)Drifted gilling gears : Drift gill net. (c)Encircled gilling gears : Encircled gill net. (d)Seine - gilling gears : Seining gill net. (e)Dragged gilling gears : Dragged gill net. \circled2Tangling gears (a)Set tangling gears : Double trammel net, Triple trammel net, etc. (b)Encircled tangling gears : Encircled tangle net. (c)Dragged tangling gears : Dragged tangle net. \circled3Restrainting gears (a)Drifted restrainting gears : Pocket net(Gen - type net). (b)Dragged restrainting gears : Dragged pocket net. (14)Sucking gears : Fish pumps.