• Title/Summary/Keyword: 100m RADIUS

Search Result 124, Processing Time 0.036 seconds

A Study of Crystallization and Fracture Toughness of Glass Ceramics in the $ZrO_2.SiO_2$ Systems Prepared by the Sol-Gel Method (졸-겔법으로 제조한 $ZrO_2.SiO_2$계 결정화유리의 결정화 및 파괴인성에 관한 연구)

  • 신대용;한상목;강위수
    • Journal of the Korean Ceramic Society
    • /
    • v.37 no.1
    • /
    • pp.50-56
    • /
    • 2000
  • Precursor gels with the composition of xZrO2·(100-x)SiO2 systems (x=10, 20 and 30 mol%) were prepared by the sol-gel method. Kinetic parameters, such as activation energy, Avrami's exponent, n, and dimensionality crystal growth value, m, have been simultaneously calculated from the DTA data using Kissinger and Matusita equations. The crystallite size dependence of tetragonal to monoclinic transformation of ZrO2 was investigated using XRD, in relation to the fracture toughness. The crystallization of tetragonal ZrO2 occurred through 3-dimensional diffusiion controlled growth(n=m=2) and the activation energy for crystallization was calculated using Kissinger and Matusita equations, as about 310∼325±10kJ/mol. The growth of t-ZrO2, in proportion to the cube of radius, increased with increasing heating temperature and hteat-treatment time. It was suggested that the diffusion of Zr4+ ions by Ostwald ripening was rate-limiting process for thegrowth of t-ZrO2 crystallite size. The fracture toughness of xZrO2·(100-x)SiO2 systems glass ceramics increased with increasing crystallite size of t-ZrO2. The fracture toughness of 30ZrO2·70SiO2 system glass ceramics heated at 1,100℃ for 5h was 4.84 MPam1/2 at a critical crystaliite size of 40 nm.

  • PDF

Fabrication of Microlens Integrated Silicon Structure for Optical Interconnects (광연결을 위한 마이크로 렌즈가 집적된 실리콘 구조 제작)

  • Min, Eun-Gyeong;Song, Yeong-Min;Lee, Yong-Tak;Yu, Jae-Su
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2009.02a
    • /
    • pp.491-492
    • /
    • 2009
  • We have fabricated a microlens integrated silicon (Si) structure for optical interconnects. To form microlenses, the Si wafer was wet-etched with $SiN_x$ mask in a HF:$HNO_3:C_2H_4O_2$ solution and then the holes were filled with a AZ9260 photoresist. The focal length of microlens increased in proportional to its radius of curvature (ROC). For the ROC of $100-161{\mu}m$, the focal lengths were obtained approximately between $160{\mu}m$ and $310{\mu}m$, in an agreement with the simulated values using a ray tracing method.

  • PDF

The Analysis of Relationships between Road Alignment and Terrain Conditions for National Forest Road (국유림도(國有林道)의 노선선형(路線線形)과 지형(地形)과의 관계분석(關係分析))

  • Cha, Du Song;Cho, Koo Hyun
    • Journal of Korean Society of Forest Science
    • /
    • v.84 no.4
    • /
    • pp.517-524
    • /
    • 1995
  • This study was conducted to investigate the characteristics of the road alignment, correlations among evaluation factors of the alingment, and the relationships between the evaluation factors and terrain factors for the forest road of five National Forest Offices. The results were as follows : 1. The elongation coefficients(${\eta}$) of forest road in Kangnung and Wonju National Forest Office were ranged 0.3~0.5, and those of Andong, Namwon, and Kongju National Forest Offices were ranged 0.2~0.3 in straight line of 100m, 200m, and 300m. 2. Three different types of plane alignment were identified for Kangnung and Wonju National Forest Offices, Namwon and Kongju National Forest Offices, Andong National Forest Office. However, longitudinal alignment for five National Forest Offices tended to be similar conditions. 3. Low correlation coefficients were calculated in the relation between elongation coefficients(${\eta}$) and evaluation factors of plane alignment(curve length ratio(%), sum of inverse number of each curve radius(m/km), and sum of each intersection angle($^{\circ}/km$)) for three straight lines. On the contrary, high correlation coefficients were obtained among the relations of curve length ratio(%), sum of inverse number of each curve radius(m/km), and sum of each intersection angle($^{\circ}/km$). 4. Slope(%) were closely correlated with plane alignment, and so were the relationships between frequency of valleys and streams(No./km) and elongation coefficients(${\eta}$) of forest road.

  • PDF

A Study on the Analytic Unit of Habitat Suitability Assessment and Selection in Conservation Areas for Leopard Cat(Prionailurus bengalensis) - Focus on Chungcheong Province Area - (삵의 서식지 적합성 평가를 위한 분석단위 설정 및 보전지역 선정 - 충청도 지역을 중심으로 -)

  • Lee, Dong-Kun;Song, Won-Kyong
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.36 no.5
    • /
    • pp.64-72
    • /
    • 2008
  • The purpose of this study is to compare a habitat suitability grid unit included within a radius of 100m and $1km^2,\;2km^2,\;4km^2$ watershed units in order to predict suitable habitats for Chungcheong province's endangered leopard species(Prionailurus bengalensis). Other developed countries have carried out habitat assessment and established management policies for species conservation using such methods as HEP(Habitat Evaluation Procedures), HSI(Habitat Suitability Index) and GAP(Gap Analysis Program), etc. In accordance with these studies, many evaluation methods for habitat conservation have been proposed in Korea, but these studies are lacking in consideration of analytic units and general application of analysis results. This study predicted leopard habitat using a logistic regression analysis according to analytic units by data from 56 location and 8 sources of environmental data, including elevation, slope, forest area, land cover, roads, water, broadleaf trees, and human habitation. Moreover, the habitat suitability assessment unit was confirmed by a model comparison process encompassing model explanation. verification, and application on a regional scale. Results showed that assessment methods that took into consideration areas in and around the location points were beneficial in predicting habitat and that the assessment unit was appropriate for a 30m grid unit including areas within a radius of 100m and a $1km^2$ watershed unit in Chungcheong Province. This study suggests a method for regional habitat conservation to complement existing conservation area selection methods, and the results are expected to be used in conservation area selection and ecosystem management policies for endangered species.

Sensitivity Analysis of Artificial Recharge in Consideration of Hydrogeologic Characteristics of Facility Agricultural Complex in Korea : Hydraulic Conductivity and Separation Distance from Injection Well to Pumping Well (국내 시설농업단지의 수리지질 특성을 고려한 인공함양 민감도 분석 : 수리전도도 및 주입정과 양수정의 이격거리)

  • Choi, Jung Chan;Kang, Dong-hwan
    • Journal of Environmental Science International
    • /
    • v.28 no.9
    • /
    • pp.737-749
    • /
    • 2019
  • In this study, the sensitivity analysis of hydraulic conductivity and separation distance (distance between injection well and pumping well) was analyzed by establishing a conceptual model considering the hydrogeologic characteristics of facility agricultural complex in Korea. In the conceptual model, natural characteristics (topography and geology, precipitation, hydraulic conductivity, etc.) and artificial characteristics (separation distance from injection well to pumping well, injection rate and pumping rate, etc.) is entered, and sensitivity analysis was performed 12 scenarios using a combination of hydraulic conductivity ($10^{-1}cm/sec$, $10^{-2}cm/sec$, $10^{-3}cm/sec$, $10^{-4}cm/sec$) and separation distance (10 m, 50 m, 100 m). Groundwater drawdown at the monitoring well was increased as the hydraulic conductivity decreased and the separation distance increased. From the regression analysis of groundwater drawdown as a hydraulic conductivity at the same separation distance, it was found that the groundwater level fluctuation of artificial recharge aquifer was dominantly influenced by hydraulic conductivity. In the condition that the hydraulic conductivity of artificial recharge aquifer was $10^{-2}cm/sec$ or more, the radius of influence of groundwater level was within 20 m, but In the condition that the hydraulic conductivity is $10^{-3}cm/sec$ or less, it is confirmed that the radius of influence of groundwater increases sharply as the separation distance increases.

Measurement and Analysis of Earth Resistivity for the Substation Grounding Design (변전소 접지설계를 위한 대지고유저항의 측정과 해석)

  • Han, P.;Kim, J.Y.;Choi, J.K.;Jung, G.J.;Kim, J.B.
    • Proceedings of the KIEE Conference
    • /
    • 1997.07c
    • /
    • pp.807-812
    • /
    • 1997
  • For an equivalent uniform soil model to multiple-layered soil structure, ground depth, which is used in the calculation of equivalent resistivity, should be varied according to the size of grounding area. In case of 150 kV substation grounding design, 15 m of ground depth has been used and 25 m for 345 kV, But applying these ground depths can lead to errors in grounding resistance calculation, and these errors are coming from the poor representation of those depths to real soil resistivities. In this paper, the soil resistivity measurement techniques by Wenner method and grounding resistance calculation results by computer simulation were presented. Case studies contain the area from 3,000 to $30,000\;m^2$ and measuring space from of m to $100{\sim}250\;m$, Based of the computation results, 50 m, 60 m and 80 m of ground depth for less than 30, 40 and 70 m of equivalent hemispherical radius were proposed respectively.

  • PDF

Designation and Management of Water Source Protection Areas for Indirect Intakes

  • Choi, Ji-Yong;Hwang, Dae-Ho
    • Environmental Engineering Research
    • /
    • v.15 no.4
    • /
    • pp.231-237
    • /
    • 2010
  • With increased chemical and economic development activities in upstream areas, the amounts of pollutants released have increased, and as such, so has the need for positive management of water supply source areas. Although more than 90% of the water supply sources in Korea depend on direct intake from surface water, the interest in indirect intake, such as riverbank filtration water, has recently risen, with some local governments currently undertaking indirect intake. Even in cases of indirect intake, water supply source protection zones need to be assigned for the comprehensive control of pollutants. To establish water quality protection zones for indirect intake, the scope of the protection zones needed to reflect the hydrological features of the water-bearing deposits of each site. Water source protection areas were estimated and presented as the 1st (within a 100 m radius from an intake well) and 2nd (within a 2 km radius from an intake well) zones. The 1st zone was more sensitive; hence, the installation of various facilities should be prohibited, and the area should be regarded as off-limits. For the 2nd zone, appropriate management should prohibit and restrict activities already present in the water source protection zone.

Analysis of Space Radiation Dose Rate using portable X-ray Generating Device for Abdomen (이동형 X-ray 발생장치를 이용한 복부 촬영 시 공간 선량률에 관한 연구)

  • Park, Chang-Hee
    • Korean Journal of Digital Imaging in Medicine
    • /
    • v.12 no.2
    • /
    • pp.97-101
    • /
    • 2010
  • This experimental study is carried out one of the General Hospital in Kyungbok providence. Abdomen Phantom being located Anterior-posterior(AP) position on portable bed, and the portable X-ray generating device was placed the phantom at $-90^{\circ}$ direction. The experiment were set 65 kVp, 10 mAs, $10{\times}10\;cm^2$, 100 cm(FOD) for the measurement. Digital proportional counting tube survey meter was used for measuring the space scatter dose. Measurement points of horizontal distribution was set up at $30^{\circ}$ interval by increasing 50 cm radius of upside, downside, left and right. Vertical distribution of measurement points were set up for the vertical plane with a radius of at $30^{\circ}$ intervals with 50cm increments. It is concluded that longer distance from the soure of X-ray significantly decrease radiation dose to the patient and use of the radiation protection device should be applied in clinical practice to reduce dose to the patient.

  • PDF

Assessment of Running Speed of Large Logging Trucks on the Forest Road Structure (임도 구조에 따른 대형 목재운송차량의 주행속도 분석)

  • Hwang, Jin-seong;Lee, Kwan-hee;Ji, Byoung-yun
    • Journal of Korean Society of Forest Science
    • /
    • v.110 no.4
    • /
    • pp.622-629
    • /
    • 2021
  • This study analyzed the running speed of logging trucks (25 tons), depending on the structural state of forest roads, on four main forest roads in the national forest management offices in Chuncheon and Hongcheon for trafficability. The speeds for the curved and straight sections were 7.6 km/h and 8.7 km/h, respectively, which were less than the designed speed (20 km/h). Thus, it would be necessary to improve the forest road's structure to fulfill minimum running speed. No significant difference was observed in the running speed by the longitudinal gradient up to 13%, while it was increased at more than 100 m by the distance in the straight section. By the facility's location in the curved section, the running speed was 6.2%-9.3% lower in a ridge than a valley. The running speed was lowest at the internal angles of <90° and at the curved radius of <15 m, respectively. When this radius was less than 15 m, the substandard sections for widening amounts were more than 50%; thus, sufficient widening was not achieved.

Prediction of Change in Growth Rate of Algae in Jinhae Bay due to Cooling Water Discharge (냉배수 방류에 따른 진해만의 해조류 성장 속도 변화 예측)

  • Park, Seongsik;Yoon, Seokjin;Lee, In-Cheol;Kim, Byeong Kuk;Kim, Kyunghoi
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.27 no.2
    • /
    • pp.308-323
    • /
    • 2021
  • In this study, we aimed to evaluate the environmental changes in Jinhae Bay caused by cooling water using numerical modeling. Cooling water discharge volume from the results of Case 1 (10 m3 sec-1) showed that the environmental changes in Jinhae Bay were extremely insignificant throughout the study period. In the simulation conditions of Case 2 (100 m3 sec-1), there was a decrease in water temperature of approximately 1 - 3℃ within a 5 km radius from the discharge outlet. In Case 3 (1000 m3 sec-1), a decrease in water temperature of up to 4 - 5℃ was observed within a radius of 8 km from the discharge outlet and cooling water discharge spread throughout the Bay. Growth rate of microalgae decreased by up to 15 % in November, whereas it increased by up to 6 % near the Hangam Bay in Case 3. From the above results, we confirmed that the environmental changes in Jinhae Bay due to cooling water discharged from Tongyeong LNG station are extremely insignificant. Moreover, it is expected that cooling water discharge could be utilized as a counter measure for 'red tide bloom' or 'macroalgae growth'.