• Journal of the Korean Society of Safety
• /
• v.26 no.2
• /
• pp.89-98
• /
• 2011

The traffic accidents at a construction site, which happen due to construction vehicles' frequent access to a construction site, its subsequent conflicts with ordinary vehicles and pedestrians, and inappropriate installation & management of traffic security facilities, have not many proportions in all traffic accidents, but obviously, the accident damage is quite serious when comparing the level of the fatal per one accident. This research conducted an analysis of traffic accident injury severity using Ordered Probit Model in relation to 241 traffic accident cases that occurred caused by construction sites among the traffic accidents that took place in Seoul and Gyeoggi-do region for two years from 2006 until 2007. As a result, the significant variables enough to explain traffic accident injury severity were analyzed to be the state of road surface, linear shape of an accident spot & whether the damaging car belongs to the vehicle for construction, and whether vehicles have access to a construction site at the time of an accident. Through this, this research found out some fact as follows: first, there need to be more aggressive management of the vehicles for construction and a year-round placement of the manpower who can control vehicular access to a construction site. Second, it is necessary to get drivers to recognize the fact that there exists a construction site on the construction section which is on the border of curved roads in advance to prevent a traffic accident, helping to reduce socioeconomic loss & costs incurred by a traffic accident.

• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.25-36
• /
• 2017

The purpose of this study is to analyze traffic accident reduction effect of the introduction of motorcycle safety inspection. To analyze the effect of motorcycle inspection, we first estimate the number of defective motorcycles, and calculate the probability of accident occurrences caused by the defect using four year traffic accident data. Finally, we estimate the number of reduced accidents due to the introduction of the inspection and the total reduced accident cost. In this study, we analyzed three scenarios. It is analyzed that when the safety inspection system is applied to all motorcycles, 642 cases of traffic accidents and 325 million won per year of traffic accident costs are reduced. It is approximately 0.1% of 2014 total traffic accident cost of 26.5725 trillion won per year. It suggests that the cost of traffic accidents and traffic accidents due to vehicle factors are reduced when the safety inspection system is introduced.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.765-774
• /
• 2023

The Ministry of Employment and Labor implemented the process safety management(PSM) system from 1996 to prevent major industrial accidents caused by chemical substances, but the number of accidents did not drastically decrease. Even in workplaces with excellent PSM ratings, large-scale chemical accidents still occur due to non-compliance with safety work procedures and insufficient safety measures during maintenance and other work. Accordingly, the chemical accident risk warning system was introduced in 2014 to supplement the PSM system and prevent accidents that may occur during regular or unexpected maintenance and repair work. In the meantime, changes in the safety management system have been checked since the introduction of the chemical accident risk warning system at chemical handling workplaces, and based on the results, a plan for upgrading this system has been proposed. The effect of the CARW system was found to directly prevent accidents through wired and on-site consulting and post-management at the workplace and indirectly contribute to the establishment of a safety and health management system at the workplace, such as improving safety culture awareness.

• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.329-336
• /
• 2002

Recently, in the whole fields of industry including shipping business, the conception and importance of Human Factor is very highly and frequently emphasized. But the domestic crew disaster including injury and illness in our shipping business shows higher accident rate than other shipping countries. Therefore the developing of measures to prevent/reduce the accident is highly required as the marine accident including crew disaster causes enormous loss of property and human life in size and scale. But, because the domestic data regarding the crew accident are relatively insufficient and rule, the developing of those measures has many difficulties. Therefore, this study is to make the concerning data for the useful reference by showing the trend and current situation of crew accidents, assorted by the crew's rank, type of the accident, injured part of the body, cause of the accident, type of ships and type of the works when the accident occurred, by using the each ocean-going shipping company's recent 5 years('95∼'99) data in korea.

• Journal of the Korean Society of Safety
• /
• v.26 no.6
• /
• pp.1-6
• /
• 2011

This study focuses on the control strategy for industrial safety in Korea. Specifically, the effect of safety budget such as the industrial accident prevention fund on the safety performance to prevent and reduce industrial accidents is statistically examined first and modeled as a second order system. The effectiveness of such a dynamic model is also explained with a simple PI control mechanism in a feedback loop. The simulated model, however, suggests that, without improving the efficiency of the safety system, extra safety budget needed to decrease the accident rate to a level in advanced countries is far beyond the social consensus. An efficient way of reducing industrial accidents based on such a dynamic model with more internal damping but with less elastic nature in a feedback loop framework needs to be implemented.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.73-80
• /
• 2011

There are insufficient models that find problems and solutions for accident prevention through risk assessment and suggest safe work process and work instruction from foundation works to finish work for accident decrease. This paper presents a quantitative risk assessment model by analysis of risk factors in each process such as foundation, erection, pier, pier upper and etc based on accident examples and investigation on actual condition in bridges construction work. In addition, the safety management system was developed to perform risk assessment of construction and use it for effective safety training for labor.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.54-58
• /
• 2011

Emergency preparedness plan(EPP) is the systematic management of activities that involve a material degree of risk of loss or other damage to the surroundings(people, property and environment), and the boundary of accident recovery plan(ARP). The main purpose of the program is to provide a safety management system to each facility in order to enable to prevent accident and to control accident immediately. The EPP includes not only typical safety-related documentations such as material safety data sheet(MSDS), standard operation procedure(SOP), emergency response plan(ERP). EPP is established basis of the preliminary safety analysis involving risk identification, assessment and prevention plans. The program is also helpful for government or related agencies to control a number of accidents in small-scale companies in the whole country.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.130-135
• /
• 2011

This study deals with the accident models of arterial road sections. The objectives is to develop the models by number of lane. In pursuing the above, this study gives particular emphasis to dividing the 474 small link sections, collecting the accident data of 2007, and applying the statistical programs of SPSS17.0 and NLOGIT4.0. The main results are as follows. First, the number of accidents of two-lane roads were analyzed to be 59.9% of totals and to be the most of all. Second, one Poisson and two negative binomial regression models which were all statistically significant were developed. Finally, the common variables of all models were evaluated to be ADT and number of exit/entry which were all positive to the accidents.

• Journal of the Korean Society of Safety
• /
• v.26 no.2
• /
• pp.70-76
• /
• 2011

Industrial accident frequency in small- and medium-sized ship-building plants is much higher than that of large-sized ones so that safety management activities should be different. In that sense, voluntary hazard assessment would be helpful for small- and medium-sized plants. However, conventional hazard assessment items and methods had some problems that discouraged voluntary participation of plants concerned. This study aimed to develop a new model for small- and medium-sized ship-building plants that can promote and encourage voluntary hazard assessment activities. For that purpose, ship-building process was assumed as a sequence of phases, and accident characteristics were compared with them. From that result, relative weights of accident factors including ship-building phases, accident types, occupational category, accident-induced objects, and hazardous items were determined with accident frequency data and with the help of expert groups. Therefore, for web-based integrative computer programming, a plain but accident data-dependent model was developed, with an additive function for related agencies that want to collect assessment results. It is expected that this model would help small- and medium-sized ship-building plants that wanted not only simple checklists but also effective assessment and management guidelines.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.1
• /
• pp.75-89
• /
• 2024

The objective of this study was to conduct research and analysis using Group Focus Interview to survey the between construction site workers and managers implementing for the Severe Accident Punishment Act. Focused on measures to improve safety management effectiveness for the effectiveness of establishing a safety management system. A plan to improve the efficient safety management system was presented to 50 construction industrial managers and workers. In order to ensure the industrial accident prevention policies appropriately, it is necessary to be aware of safety obligations for workers as well as business operators. In addition, despite the existence of a commentary on the Serious Accident Punishment Act, confusion in the field still persists, so in the event of a major accidents, the obligation to take safety and health education is strengthened, and effective case education is proposed by teaching actual accident cases suitable for actual working sites. It is necessary to make all training mandatory, and it is necessary to reconsider awareness through writing a daily safety log, awareness of risk factors, etc., and writing down risk information. Above all, at the construction ordering stage, it is necessary to keep the construction safety, request corrections and supplements for problems issues that arise, and consult between the orderer and the construction company about the problems issues. Rather than having only the construction company correct or supplement the safety management plan, the contents should be shared with supervisors and workers to establish a more practical solution. Results of this study will contribute to improving the effectiveness of the serious accident and construction safety management system.