• Korean Journal of Poultry Science
• /
• v.17 no.3
• /
• pp.179-191
• /
• 1990

In order to study the effects of supplementation of live yeast(Saccharomyces cerevisiae) on the performance of laying hens, five experiments were conducted. Two experiment were conducted during summer period, one with 37 wk old Dekalb-Delta strain laying birds(Exp. 1) and the other one with 100 wk old molted Nick Chick Brown laying birds(Esp.2) . In each experiment, 240 birds were divided into 12 groups of 20 birds each and randomly distributed. Each of the two experimental diets(Control 71 and 0.05% live yeast supplemented 72) was fed to 6 groups for 4 wks in Exp.1 and 3 wks in Exp.2. Three experiments were conducted during winter period, Exp.2 with 54 wk old Hy-Line strain laying birds, Exp.4 with 52 wk old Hy-Line strain laying birds, and Exp.5 with 36 wk old broiler breeder(Indian River strain). In each experiment, 540 birds were divided into 18 groups of 30 birds each and randomly distributed. Each of the 3 experimental diets(Control：$T_1$0.05% live yeast supplemented：$T_2$ and 0.1% live yeast supplemented ： T$_3$) was fed to 9 groups for 6 wks in Exp.3, 9 wks in Exp.4 and 4 wks in Exp.5. In Exp.4, Latin Square design was employed to determine the effects of switching feeds at 3 wk intervals. All hens were housed in cages of commercial farm and experimental diets were made with commercial layer feeds. In Experiment 1, egg production was significantly(P＜0.05) higher in $T_2$. Feed intake was significantly (P＜higher in 72 at 1st wk but 4 wk average was not significantly different. Feed efficiency was significantly(P＜0.01) better in 72 at End wk but 4 wk average was not significantly different. Other parameters, such as weight, soft egg production, cracked egg production and mortality were not significantly different. In Experiment 2, egg production was significantly(P＜0.05) higher in $T_2$. Feed efficiency was significantly (P＜0.05 and P＜0.01) better at End wk and 3rd wk but 3 wk average was not significantly different. Soft egg production was significantly(P＜0.05) higher in 72. Other parameters were not significantly different. In Experiment 3, egg productions were significantly(P＜0.05) different among treatments ： $T_3$ was higher than $T_1$ and $T_2$ was higher than $T_1$. Egg weight of $T_1$ and $T_2$was significantly(P＜0.05) heavier than $T_3$. Feed intake of $T_2$ and $T_3$ was significantly(P＜0.05) higher than $T_1$ at 6th wk but overall average was not significantly different. Soft egg production were significantly(P＜0.01) different among treatments：$T_1$ was higher than $T_3$ was higher than $T_2$. Feed efficiency cracked e99 Production and mortality were not signifcantly different. In Experiment 4, egg production tended to increase as the level of live yeast supplementation increased but they were not statistically different. In Experiment 5, egg production of broiler breeders of $T_3$ was significantly(P＜0.01) higher than $T_1$. Feed intake of $T_3$ was significantly(P＜0.05) greater than $T_1$ and $T_2$ at 3rd wk but overall average was not significantly different. Fertility and hatchability tended to be higher in the supplemented groups than in the control.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.336-336
• /
• 2011

본 연구에서는 강우시 경사지 밭에서 발생하는 토양유실량을 저감하기 위하여 지표피복재의 유무와 강우강도를 달리하여 실외인공강우 실험을 통하여 평가하였다. 인공강우 실험은 경사도 28%와 각 시험포는 $5\times30m$의 크기로 strawmat+PAM+sawdust, control(bare), strawmat+PAM, strawmat+PAM+rice husks를 4개 조성하고, 각 시험포는 하단부에 강우유출수를 채취할 수 있는 설비(flume)를 설치하였다. 대조구 실험을 위하여 각 시험포에서 발생하는 직접유출량과 유사량을 비교 분석하였다. 시험포의 토양은 양질사토로 일반 고랭지 밭의 흙과 동일한 성질을 가지고 있는 토양을 사용하였고, 지표 피복처리는 straw mat, saw dust, rice husk 그리고 PAM 등 4개의 재료를 사용하였다. 인공강우 실험은 1차 10월 18일, 2차 10월 24일, 3차 10월 30일, 4차 11월 7일로 총 21일간 각각 약 1주일의 간격을 두고 실시하였으며 인공강우 시험기의 강우강도는 각 31.1 ~ 44.4 mm/hr로 모의하였다. 연구결과 시험포에서 발생한 유출량은 지표피복을 하지 않은 대조구 시험포보다 지표를 피복한 시험포에서 약 15.7 ~ 19%의 감소한 것으로 나타났다. 유사량은 대조구 시험포보다 약 93.1 ~ 99.3% 감소한 것으로 나타났으며, 유출량과 유사량은 straw mat+PAM+sawdust와 straw mat+PAM+rice husk를 적용한 시험포에서 저감효과가 큰 것으로 나타났다. 이와 같이 지표피복처리는 강우가 발생하였을 때 강우타격력의 감소와 유출수의 유속감소 그리고 침투능을 증가하는 역할을 하여 경사지, 농경지 및 공사현장에서 토양 유실을 저감하며, 하천이나 강으로 유입되는 탁수량의 저감에 큰 효과가 있을 것으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.357-360
• /
• 2007

NREL Phase VI 12% 축소모델을 사용한 표준풍력터빈 풍동시험은 2006년에 1차 시험이 수행되었다. 1차 풍동시험은 복합재 블레이드를 사용하여 표준조건(설치각 3도)에 대해 수행되었으며 블레이드 표면상태에 따라 측정값이 영향을 받는 것을 파악하였다. 2007년 4월에 수행된 2차 풍동시험은 표면상태의 영향을 보다 정확히 파악하기 위해 알루미늄 블레이드를 사용하여 시험을 수행하였으며, 블레이드 제작 정밀도에 따른 영향을 파악하였다. 낮은 레이놀즈 수 영역(저속영역)에서는 블레이드 표면상태 따라 토크 값 다르게 나타나며, 블레이드 끝단 부근의 제작 정밀도는 최대 토크 이후의 영역에 영향을 미치는 것으로 나타났다. 0.1mm 이내의 정밀도로 제작된 모델의 경우 NREL 시험결과와 전체적인 형상이 유사하게 나타나며, 축소효과에 의한 영향으로 최대토크는 약 25% 정도 감소현상을 보이고 있다.

• New & Renewable Energy
• /
• v.3 no.2 s.10
• /
• pp.53-59
• /
• 2007

NREL Phase VI 12% 축소모델을 사용한 표준풍력터빈 풍동시험은 2006년에 1차 시험이 수행되었다. 1차 풍동시험은 복합재블레이드를 사용하여 표준조건(설치각 3도)에 대해 수행되었으며 블레이드 표면상태에 따라 측정값이 영향을 받는 것을 파악하였다. 2007년 4월에 수행된 2차 풍동시험은 표면상태의 영향을 보다 정확히 파악하기 위해 알루미늄 블레이드를 사용하여 시험을 수행하였으며, 블레이드 제작 정밀도에 따른 영향을 파악하였다. 낮은 레이놀즈 수 영역(저속영역)에서는 블레이드 표면상태 따라 토크 값 다르게 나타나며, 블레이드 끝단 부근의 제작 정밀도는 최대 토크 이후의 영역에 영향을 미치는 것으로 나타났다. 0.1mm 이내의 정밀도로 제작된 모델의 경우 NREL 시험결과와 전체적인 형상이 유사하게 나타나며, 축소효과에 의한 영향으로 최대토크는 약 25% 정도 감소현상을 보이고 있다.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.548-556
• /
• 2009

In order to evaluate applicability of rock cut-slope investigation system, typical clinometer and photogrammetry investigation system were used for rock slopes; first for 7 discontinuities, and secondly, 10 discontinuities, and the results were compared. The first verification was performed depending on discontinuity joint shapes and slope angles, and the second verification was performed depending on shot time and shot locations. The results showed that differences of dip direction $1^{\circ}{\sim}4^{\circ}$, dip $0^{\circ}{\sim}4^{\circ}$. In the second verification test, the differences of dip direction was $0^{\circ}{\sim}6^{\circ}$, and dip $0^{\circ}{\sim}6^{\circ}$. The photogrammetry method for rock slope survey system is quite reliable when clinometer generally shows ${\pm}10^{\circ}$ errors due to surface roughness and investigator.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1929-1933
• /
• 2008

조석에 의한 지하수위변동이 발생하는 해안가 암반대수층에서 고조(high tide)과 저조(low tide) 조건에서의 차이를 규명하기 위한 양수시험이 수행되었다. 본 연구에서 양수시험이 수행된 시험대 수층은 암반층으로서 시험공들은 해안가에서 약 180 m 이격되어 있으며, 양수정(MW1공)과 관측정(MW2공)의 이격거리는 8.05 m 이다. 양수정과 관측정 모두 공 내경은 0.205 m 이며, 케이싱심도는 지표면하 19 m 정도이다. 그리고, 양수정과 관측정의 지하수위는 지표면하 5 m 정도에 형성 되어 있으며, 시험대수층의 두께는 약 40 m 정도이다. 양수시험은 총 3회 수행되었으며, 모든 시험에서 수중모터 설치심도는 지표면하 30 m 이고 양수율은 $75\;m^3/day$로서 동일하였다. 그러나, 양수시작 시간의 차이를 두어 고조 후 1회(1차 시험), 저조 후 2회(2차 및 3차 시험) 수행되었다. 양수정과 관측정에서 자동수위측정기(Model 3001, Solinst)를 설치하여 관측된 지하수위변동 자료에 의하면, 조석현상 발생 후 시험공 내 지하수위변동 경과시간은 고조(high tide) 후 2시간, 저조 (low tide) 후 1시간 정도인 것으로 나타났다. 따라서, 양수시험 시 1차 시험은 고조 후 2시간 경과한 시점에서, 2차 및 3차 시험은 저조 후 1시간 경과한 시점에서 양수가 시작되었다. 양수시험에 의한 경과시간에 따른 수위강하량 그래프에서는 고조조건이 저조조건에 비해 수위강하량이 더 적은 것으로 나타났다. 이러한 원인은 저조에 비해 고조 조건에서는 해수에 의한 지하수위가 상승하여, 동일한 양수조건에서 수위강하량이 적게 나타난 것이다. 양수시험 자료가 AQTESOLV 3.5 프로그램을 이용하여 해석되었다. Theis method에 의해 산정된 수리전도도는 고조 조건의 양수시험에서는 $4.159{\times}10^{-6}\;m/sec$, 저조 후에서는 각각 $3.818{\times}10^{-6}\;m/sec$와 $3.926{\times}10^{-6}\;m/sec$ 이었다. 저조 후에 비해 고조 후의 수리전도도가 5% 이상 높은 것으로 산정되었다. 이상의 연구 결과들에 의해, 해안가 암반대수층에서는 양수시험 시 조석효과에 의한 수리적인 변동을 고려한 설계와 해석이 수행되어야함을 확인할 수 있었다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.19
• /
• pp.39-46
• /
• 1975

The optimum plot size and shape for soybean yield trials were estimated by using two different soybean varieties, Kumkang-daelip and Clark. Long narrow shape plot was generaIly showed lower C.V. value as compared to the plots consisted of more row number with short row length. The results obtained in this experiment provided the optimum size and shape of plots for Clark as 1. 4m x 6m, and for Kumkang-dailip as 1.4m $\times$ 9m, respectively.

• Journal of Space Technology and Applications
• /
• v.1 no.3
• /
• pp.319-336
• /
• 2021

This paper discusses the results of launch environment tests for the engineering qualification model (EQM) of nanosatellite Scale magNetospheric and Ionospheric Plasma Experiment (SNIPE) for scientific missions and lessons learned for the design of nanosatellites. SNIPE is a group of four formation-flying 6U nanosatellites with a range of payloads for missions including space weather measurement. We developed the EQM to verify the preliminary design prior to fabricating the flight model. Launch environment test of EQM was conducted for the first time in 2019, and all failures were corrected and verified at the second test conducted in 2021. A notable point of the two tests is that the nanosatellite deployer used in the first test is different from that of the second test. The second deployer has the capability to fix the internal satellite whereas the first deployer just contains and deploys the satellite. Thus actual mechanical loads the satellite receives is reduced for the second test compared to the first test. This work compares the mechanical responses of two tests and proposes general guidelines for structural design of nanosatellites.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.50-59
• /
• 2005

This paper described performance test of 1st prototype "Tail-Fan" system. KARI(Korea Aerospace Research Institute) developed "Tail-Fan" system as a kind of helicopter anti-torque system(ATS) and designed ATS performance test-rig for Tail-Fan system performance test. For Tail-Fan system performance tests, firstly, test-rig operation tests were carried out for verification of design specifications. And natural frequencies of fan blade and test-rig were measured respectively. To find the operation rotating speed for performance tests, vibration tests using accelerometers on tail gear box(TGB) were carried out. Through the fanplot and vibration test results, rotational speed for Tail-Fan performance test to avoid a resonance were found and performance tests were carried out in flight conditions. We analyzed test data by non-dimensionalization. Through this results, 1st prototype "Tail-Fan" system was satisfied with design requirements.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.4
• /
• pp.483-488
• /
• 1997

This experiment was conducted to determine cutting time on the yield and nutritive value of brittle culm rice. Plant height and number of tiller were significantly different between variety and cutting time, and regrowth plant height and rate of regrowth tiller were tall and high at the early cutting. Early cutting increased crude protein, fat and NFE(Nitrogen free extract) content in the harvested foliage but crude fiber and ash content were decreased in the first cutting. Those of second cutting also showed reverse tendency. Fresh and dry matter yield were highest on heading date cutting, and those of KL501 were higher than those of Seomjinbyeo. TDN(Total digestible nutrients) content was higher with earlier cutting for initiated cutting, but that of second cutting was reversed. KL501 showed higher TDN content than Seomjinbyeo did at the any cutting time. TDN yield of heading date cutting was higher than that of the other cutting time.