• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2204-2206
• /
• 1999

Pulsed Nd:YAC laser is used widely for materials processing and instrumentation. It is very important to control the laser energy density in materials processing by a pulsed Nd:YAG laser. A pulse repetition rate and a pulse width are regarded as the most dominant factors to control the energy density of laser beam. In this study, the alternating charge-discharge system was designed to adjust a pulse repetition rate. This system is controlled by one chip microprocessor and allows to replace an expensive condenser for high frequency to a cheap condenser for low frequency. In addition. we have investigated the current pulse shape of flashlamp and the operating characteristics of a pulsed Nd:YAG laser. As a result, it is found that the laser output of the power supply using the alternating charge-discharge system is not less than that of typical power supply. As the pulse repetition rate rises from 30pps to 120pps by the step of 30pps at 1200V, it is found that the laser efficiency decreases but the laser output power increases about 6W at each step.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.3
• /
• pp.256-262
• /
• 2011

A 20.9-kDa metalloprotease was isolated from dried fruiting bodies of the wild basidiomycete mushroom Lepista nuda. The N-terminal amino acid sequence of the protease was seen to be ATFVLTAATNTLFTA, thus displaying no similarity with the sequences of previously reported metalloproteases. The protease was purified using a procedure that entailed ion-exchange chromatography on CM-Cellulose, Q-Sepharose, and Mono S, and FPLC-gel filtration on Superdex 75. The protease functioned at an optimum pH of 7.0 and an optimum temperature of $50^{\circ}C$. It was also noted that the protease demonstrated a proteolytic activity of 1,756 U/mg toward casein. The $K_m$ of the purified protease toward casein was 6.36 mg/ml at a pH of 7.0 and with a temperature of $37^{\circ}C$, whereas the $V_{max}$ was 9.11 ${\mu}g\;ml^{-1}\;min^{-1}$. The activity of the protease was adversely affected by EDTA-2Na, suggesting that it is a metalloprotease. PMSF, EGTA, aprotinin, and leupeptin exerted no striking inhibitory effect. The activity of the protease was enhanced by $Fe^{2+}$, but was curtailed by $Cd^{2+}$, $Cu^{2+}$, $Hg^{2+}$, $Pb^{2+}$, $Zn^{2+}$, and $Fe^{2+}$ ions. The protease also exhibited inhibitory activity against HIV-1 reverse transcriptase with an $IC_{50}$ value of 4.00 ${\mu}M$. The $IC_{50}$ values toward hepatoma Hep G2 and leukemia L1210 cells in vitro were 4.99 ${\mu}M$ and 3.67 ${\mu}M$, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.9
• /
• pp.960-967
• /
• 2011

Tannin acyl hydrolase, also known as tannase, is an enzyme with important applications in the food, feed, pharmaceutical, and chemical industries. However, despite a growing interest in the catalytic properties of tannase, its practical use is very limited owing to high production costs. Several studies have already demonstrated the advantages of solid-state fermentation (SSF) for the production of fungal tannase, yet the optimal conditions for enzyme production strongly depend on the microbial strain utilized. Therefore, the aim of this study was to improve the tannase production by a locally isolated A. niger strain in an SSF system. The SSF was carried out in packed-bed bioreactors using polyurethane foam as an inert support impregnated with defined culture media. The process parameters influencing the enzyme production were identified using a Plackett-Burman design, where the substrate concentration, initial pH, and incubation temperature were determined as the most significant. These parameters were then further optimized using a Box-Behnken design. The maximum tannase production was obtained with a high tannic acid concentration (50 g/l), relatively low incubation temperature ($30^{\circ}C$), and unique low initial pH (4.0). The statistical strategy aided in increasing the enzyme activity nearly 1.97-fold, from 4,030 to 7,955 U/l. Consequently, these findings can lead to the development of a fermentation system that is able to produce large amounts of tannase in economical, compact, and scalable reactors.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.141.1-141.1
• /
• 2012

CIBER (Cosmic Infrared Background ExpeRiment) is a sounding-rocket borne experiment which is designed to find the evidence of the First stars (Pop.III stars) in the universe. They are expected to be formed between the recombination era at z ~ 1100 and the most distant quasar (z ~ 8). They have never been directly detected due to its faintness so far, but can be observed as a background radiation at around $1{\mu}m$ which is called the Cosmic Near-Infrared Background (CNB). The CIBER is successfully launched on July 10, 2010 at White Sands Missile Range, New Mexico, USA. It consists of three kinds of instruments. One of them is a LRS (Low Resolution Spectrometer) which is a refractive telescope of 5.5 cm aperture with spectral resolution of 20 ~ 30 and wavelength coverage of 0.7 to $2.0{\mu}m$ to measure the spectrum of the CNB. Since LRS detects not only CNB but also stellar components, we can study their spectral features with the broad band advantage especially at around $1{\mu}m$ which is difficult at ground observations because of the atmospheric absorption by water vapor. I identified around 300 stars from observed six fields. If we can classify their spectral types with SED fitting, we can study their physical conditions of the stellar atmosphere as well as making a stellar catalogue of continuous stellar spectrum.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1532-1534
• /
• 2003

We attempted to fabricate a dendrimer Langmuir-Blodgett(LB) films containing 48 pyridinepropanol functional end group. As the pyridinepropanol functional group could form a complex structure with metal ions. In this study the samples for electrical measurement were fabricated to two types metal complexes with $Pt^{4+}$ ions by LB method. And we have investigated the surface activity at the air-water interface as well as the electrical properties for the monolayers of G4-48PyP dendrimer complex with metal ions($Pt^{4+}$ ions) by different method. In the surface pressure-area(${\pi}$-A) isotherms of the dendrimers, the stable condensed films formed at the air-water interface and the different method of metal complex showed the difference on molecular behavior. We have studied the electrical properties of the ultra thin dendrimer LB films investigated by the current-voltage (I-V) characteristics of metal/dendrimer LB films/metal(MIM) structure. In conclusion, it is demonstrated that the metal ion around G4-48PyP dendrimer can contribute to make formation of network structure among dendrimers and it result from the change of electrical properties.

• Resources Recycling
• /
• v.4 no.4
• /
• pp.16-21
• /
• 1995

When waste t~re/~vastmz otor oil is pyrolyzed. most of them hecome gaseous produds. and thc remaining onc, whascwelght is ahout in% oi the waste Ore, is pyrolyced residue mnstly composcd oi ca~bnn black A rescsrcll was canicrl nut loutilize lhe pyralyred residue of waste tnelwuste lnotol 011 us retnin~cing agent of asphall concrete, bescd on iolelg~r lesearchrepurl. This shows thal the properlies ol asphall concrele ~nclud~cd~ugl ah~l~tyre, sistance to Tear. temperature-v~scusilysusceptil,ilily u e g reatly improved when lhe pellellrcd hrln aI carlmn hlack usmg petroleum o ~als a hinder Iar ihe pellels isused with asphalt. The surface of the pyralyred resirh~ei s covned by ocl film and thla lnakes good comllatibllity with asphallIn order lo ulilk pyrolyzed residue as a reinforcing agenl oi lhe itsphalt concrete, various tests such as Marshnll tcsi, wheeltracking, and revelhng test has been carried out a1 KLER, Ko~ea I-lighway Coo~poration, and TCMO. Tcst lcsults satirry KSslandard, show "npmvements an the dynam~cs tab~l~lzym, d incrcase reslslance to wear at cold telnpelatule Invrsligadon wascarlied oul to sludg the possibility of soil pallul~on when pyrolyzed residue is used as a tzmioicing agenl. E~pcrimentalresulls show the rcsidue contained in thc asphall docs not cause cnv~ranma~lparlo blems.e cnv~ranma~lparlo blems.

• Smart Structures and Systems
• /
• v.29 no.1
• /
• pp.195-206
• /
• 2022

Crack detection is essential for inspection of existing structures and crack segmentation based on deep learning is a significant solution. However, datasets are usually one of the key issues. When building a new dataset for deep learning, laborious and time-consuming annotation of a large number of crack images is an obstacle. The aim of this study is to develop an approach that can automatically select a small portion of the most informative crack images from a large pool in order to annotate them, not to label all crack images. An active learning method with difficulty learning mechanism for crack segmentation tasks is proposed. Experiments are carried out on a crack image dataset of a steel box girder, which contains 500 images of 320×320 size for training, 100 for validation, and 190 for testing. In active learning experiments, the 500 images for training are acted as unlabeled image. The acquisition function in our method is compared with traditional acquisition functions, i.e., Query-By-Committee (QBC), Entropy, and Core-set. Further, comparisons are made on four common segmentation networks: U-Net, DeepLabV3, Feature Pyramid Network (FPN), and PSPNet. The results show that when training occurs with 200 (40%) of the most informative crack images that are selected by our method, the four segmentation networks can achieve 92%-95% of the obtained performance when training takes place with 500 (100%) crack images. The acquisition function in our method shows more accurate measurements of informativeness for unlabeled crack images compared to the four traditional acquisition functions at most active learning stages. Our method can select the most informative images for annotation from many unlabeled crack images automatically and accurately. Additionally, the dataset built after selecting 40% of all crack images can support crack segmentation networks that perform more than 92% when all the images are used.

• BMB Reports
• /
• v.30 no.5
• /
• pp.370-377
• /
• 1997

A novel assay method is described for rapid quantitation of reaction rate of sterol ${\Delta}^7$-reductase (${\Delta}^7$-SR) which catalyzes reduction of the ${\Delta}^7$-double bond of sterols. Of six different organ tissues-liver, small intestine, brain, lung, kidney, and testis-. ${\Delta}^7$-SR activity was detected only in liver (2.30 nmol/min/mg protein) and testis (0.11 nmol/min/mg protein). Using a newly developed method which employs diet-induced enzyme proteins and ergosterol as substrate, we assessed both kinetics ($K_m=210\;{\mu}M$, $V_{max}=1.93\;nmol/min/mg$) and inhibition of the rat hepatic ${\Delta}^7$-SR against well-studied cholesterol lowering agents such as triparanol ($IC_{50}=16\;{\mu}M$). 3-$\beta$-[2-(diethylamino)ethoxy]androst-5-en-17-one (U18666A) ($IC_{50}=5.2\;{\mu}M$), and trans-1.4-bis(2-chlorobenzylaminomethyl)cyclohexane dihydrochloride (AY-9944) ($IC_{50}=0.25\;{\mu}M$). Of the three well-known AY-9944-sensitive cholesterogenic enzymes (i.e., ${\Delta}^7$-SR, sterol ${\Delta}^8$-isomerase, and sterol ${\Delta}^14$-reductase). ${\Delta}^7$-SR was found to be the most sensitive enzyme with a noncompetitive inhibition of this compound ($K_i=0.109\;{\mu}M$). Substrate specificity studies of the microsomal ${\Delta}^7$-SR indicate that the relative reaction rate for 7-dehydrocholesterol and ergosterol are 5.6-fold and 1.6-fold higher than that for lathosterol. ${\Delta}^7$-SR activity was also modulated by feeding rats a diet supplemented with 0.5% ergosterol (>2.6-fold) in addition to 5.0% cholestyramine plus 0.1% lovastatin ($\simeq$5.0-fold). Finally, microsomal ${\Delta}^7$-SR was solubilized by 1.5% 3-[3-(cholamidopropyl)-dimethylammonio]-1-propanesulfonate (CHAPS) and enriched on PEG (0~10%) precipitation, which should be suitable for further purification of the enzyme.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.2
• /
• pp.284-292
• /
• 2018

A novel ${\beta}$-agarase, AgaJ5, was identified from an agar-degrading marine bacterium, Gayadomonas joobiniege G7. It belongs to the glycoside hydrolase family 86 and is composed of 805 amino acids with a 30-amino-acid signal peptide. Zymogram analysis showed that purified AgaJ5 has agarase activity. The optimum temperature and pH for AgaJ5 activity were determined to be $30^{\circ}C$ and 4.5, respectively. AgaJ5 was an acidic ${\beta}$-agarase that had strong activity at a narrow pH range of 4.5-5.5, and was a cold-adapted enzyme, retaining 40% of enzymatic activity at $10^{\circ}C$. AgaJ5 required monovalent ions such as $Na^+$ and $K^+$ for its maximum activity, but its activity was severely inhibited by several metal ions. The $K_m$ and $V_{max}$ of AgaJ5 for agarose were 8.9 mg/ml and 188.6 U/mg, respectively. Notably, thin-layer chromatography, mass spectrometry, and agarose-liquefication analyses revealed that AgaJ5 was an endo-type ${\beta}$-agarase producing neoagarohexaose as the final main product of agarose hydrolysis. Therefore, these results suggest that AgaJ5 from G. joobiniege G7 is a novel endo-type neoagarohexaose-producing ${\beta}$-agarase having specific biochemical features that may be useful for industrial applications.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.5
• /
• pp.396-403
• /
• 2011

The concept of an air lubrication has long been an object of attention since it can be utilized to reduce the frictional resistance, and what is more, it is eco-friendly. The present study examines the basic characteristics of an air cavity with intention of applying the air lubrication technology to the reduction of the resistance of a ship without excessive power increment. For the purpose, an air cavity was created at the bottom of a flat plate by injecting air behind a backward step and the hydrodynamic properties of the air cavity and the surrounding flow has been investigated experimentally and numerically. The influence of the step height and the air flow rate have been more carefully studied since they are presumed to be the main parameters affecting the characteristics of an air cavity. The results indicates that the shapes of the air cavities attached on the flat plate become "U" or "V" type depending on the incoming flow velocity and air flow rate. The study also confirms that the length of the air cavity increases with increase in air flow rate but there is a certain critical limit in the flow rate above which increase in the air cavity length is no more evident.