• Transactions of Materials Processing
• /
• v.5 no.2
• /
• pp.156-164
• /
• 1996

To investigate the behavior of plastic deformation in axisymmetric extrusion through square dies, experimental works with the plasticine as a model material are carried out at the room temperature. Some mechanical properties of the model material are determined by compression and ring compression tests. Visioplasticity method using expermental grid distortion in extrusion is introduced to analyze the plastic flow strain rate and strain distribution. In spite of severe deformation during the extrusion through square die the visioplasticity method shows good results for the distribution of effective strain rate and effective strain.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.453-458
• /
• 1992

본 연구에서는 유한요소법에 바탕을 둔 최적공정설계법을 이용하여 압출 금형 형상의 최적설계를 실시하였다.설계의 결과를 참고문헌에서 발췌한 이론해와 비교 하였으며, 축대칭 압출공정에서 압하율, 마찰, 재료특성 등이 금형의 최적형상에 미치 는 영향에 대하여 조사하였다.

• Korean Journal of Crystallography
• /
• v.17 no.2
• /
• pp.46-50
• /
• 2006

The dinuclear copper(II) complex {[Cu(pmea)Cl][Cu$(H_2O)_3]}Cl_2{\cdot} H_2O$ (1) (Hpmea=bis(2-pyridvlmethyl)amino-2-ethanoic acid) has been synthesized and characterized. It crystallizes in the monoclinic system $P2_1/c$, a=9.0008(6) ${\AA}$, b=28.0171(19) ${\AA}$, c=8.5590(6) ${\AA}$, $\beta$=104.2280(10)$^{\circ}$, V=2092.2(2) ${\AA}^3$, Z=4. Crystal structure of 1 reveals a syn-anti carboxylate-bridged dinuclear complex, in which the coordination environment around each copper atom exhibits a distorted square-pyramid and a distorted square plane, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.10
• /
• pp.51-60
• /
• 2018

Recently, a cylindrical cut-off wall was proposed as a new technology for temporary offshore works. The cut-off wall has a cylindrical shape, so seepage analyses are necessary to analyze the effect of wall shape. In this study, a numerical analysis was performed to investigate the seepage discharge inside cut-off walls. The numerical modeling was verified by comparing with the theoretical solution for the cofferdam with double sheet piles. Two different flow conditions were compared between 2-dimensional flow and axisymmetric flow. The results showed that the discharge of the axisymmetric flow was about 1.55 times larger than that of 2-dimensional plain flow. A parametric study was carried out by varying wall radius, penetration depth of the wall, and total head difference between in and outside of the wall. The discharge decreased with the increase of the penetration depth and the wall radius. Finally, the design equations were suggested to determine the discharge for the preliminary design of the cylindrical cut-off wall.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.3
• /
• pp.133-140
• /
• 2005

In order to accelerate the rate of consolidation settlement and gain a required shear strength for a given soft clay deposit, vertical drain method combined with a preloading technique has been widely applied. In this paper, a theory of axisymmetric nonlinear consolidation fer drainage-installed deposit, which considers secondary compression (or creep) during primary consolidation, as well as the variations of compressibility and permeability during the consolidation process, has been developed. A computer program named AXICON based on Hypothesis B fur the analysis of axisymmetric nonlinear consolidation was developed by adopting finite difference method. The results of AS(ICON were compared with Hansbo's solution based on Hypothesis A, as well as in-situ settlements and pore pressures measured in test embankment of Ska-Edeby. The results indicated that Hypothesis A usually underestimated the in-situ settlement and Hypothesis B was considered to be logically correct. It was also shown that one may able to appropriately predict the real in-situ behaviors using the proposed program.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.308-320
• /
• 2006

An analytic solution to the mild-slope equation is derived for waves propagating over an axi-symmetric pit. The water depth inside the pit varies in proportion to a power of radial distance from the pit center. The governing equation is transformed into ordinary differential equations by using separation of variables, and the coefficients of the equations are transformed into explicit forms by using Hunt's (1979) approximate solution. Finally, by using the Frobenius series, the analytic solution is derived. Due to the feature of Hunt's equation, the present analytic solution is accurate in shallow and deep waters, while it is less accurate in intermediate depth water. The validity of the analytic solution is demonstrated by comparison with numerical solutions. The analytic solution is also used to examine the effects of pit geometry and relative depth on wave transformation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.8
• /
• pp.29-36
• /
• 2004

Supersonic inlet buzz can be defined as unstable subcritical operation associated with fluctuating internal pressures and a shock pattern oscillating about the inlet entrance. The flow pulsations could result in flameout in the combustor or even structural damage to the engine. An experimental study was conducted to investigate the phenomenon of supersonic inlet buzz on axisymmetric, external-compression inlet. An inlet model with a cowl lip diameter of 30mm was tested at a free stream Mach number of 2.0. Subcritical instability was investigated by considering the frequency of pressure pulsation and shock wave structure at the inlet entrance. The results obtained show that total pressure recovery ratios were varied from 0.42 to 0.78, and capture area ratio from 0.34 to 0.98. The frequency of the subcritical flow increased with decrease in capture area ratios. Frequency was measured at $224{\sim}240Hz$.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.4 s.37
• /
• pp.691-700
• /
• 1998

Based on Von Karman-Donnell kinematic assumptions for laminated shells, the nonlinear vibration behaviour of antisymmetrically or asymmetrically laminated cross-ply circular cylindrical shells with clamped and simply-supported ends are studied by a multi-mode approach. A equation is formulated and satisfies the associated compatibility equation and all boundary conditions. The displacement function is assumed to take the form of the lowest linear vibration mode and to satisfy continuity of the circumferential displacement. The nonlinear vibration equation is derived by the Galerkin's method. And nonlinear frequency is obtained by using the harmonic balance method as a function of lamination parameters, material constants, aspect ratio and amplitude of vibration. The effect of initial imperfection is also included. Results of the non-linear vibration are presented for different amplitudes of initial imperfection and four sets of boundary conditions. Present results are compared well with existing analysis results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.58-66
• /
• 1999

The flow characteristics of supersonic ejectors is often subject to compressibility, unsteadiness and shock wave systems. The numerical works carried out thus far have been of one-dimensional analyses or some Computational Fluid Dynamics(CFD) which has been applied to only a very simplified configuration. For the design of effective ejector-pump systems the effects of secondary mass flow on the supersonic ejector flow should be fully understood. In the present work the supersonic ejector-pump flows with a secondary mass flow were simulated using CFD. A fully implicit finite volume scheme was applied to axisymmetric compressible Navier-Stokes equations. The standard two-equation turbulence model was employed to predict turbulent stresses. The results obtained showed that the flow characteristics of constant area mixing tube types were nearly independent of the secondary flow rate, but the flow fields of ejector system with the second-throat were strongly dependent on the secondary flow rate due to the effect of the back pressure near the primary nozzle exit.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.1
• /
• pp.93-106
• /
• 1994

A three-dimensional box model has been developed to study the MHD wave coupling in the magnetosphere. In this model, the effects of the ring current are included by assuming the pressure gradients in the MHD equations. It is found that the axisymmetric ring current may play an important role in producing spectral noises in compressional waves, while field line resonances have no such disturbances. These results may explain the current observational characteristics that compressional cavity modes hardly appear in the satellite experiment, while field line resonances often occur. Our numerical resluts also suggest that any discrete spectral peaks such as the global cavity modes can hardly occur where the pressure distribution of the ring current becomes important. The continuous band of transverse waves is found to be unperturbed until the ring current becomes significantly asymmetric with respect to the dipole axis. In addition, our results in the absence of the pressure gradient are found to be consistent with the previous results from the box-like and dipole models.