• Korean Journal of Environmental Agriculture
• /
• v.17 no.3
• /
• pp.200-204
• /
• 1998

Physical and chemical properties of artificial soil produced by firing process were analyzed and compared with normal dry field soil and soil quality standards. Material used for production was water and wastewater treatment sludge, chabizite, and lime. The mixed material was thermally treated in the firing kiln at about $300^{\circ}C$ and $1,000^{\circ}C$, respectively, as per designed process. General properties of the artificial soil were classified as sand by unified soil classification method and similar to the dry-field soil, and even soil conditioning effect were expected when it is mixed properly with normal soil. The artificial soil is high in pH and permeability compared to the dry-field soil. Heavy metal concentrations of the artificial soil met the soil quality standards for the farmland. Overall, the artificial soil was thought to be an appropriate soil which can be returned safely to the nature without significant adverse effect. The cost for the artificial soil production process needs to be lowered for practical application as a sludge treatment, therefore, commercializing of the artificial soil is under review.

• Journal of Food Hygiene and Safety
• /
• v.23 no.1
• /
• pp.73-79
• /
• 2008

The productions of beauvericin and enniatins H, I, and MK1688 by Fusarium oxysporum KFCC 11363P were investigated on rice substrate at four temperatures (15, 20, 25, and $30^{\circ}C$) and three moisture contents (10, 20, and 40%). The largest amount of beauvericin ($718.0\;{\mu}g/g$) was produced at $25^{\circ}C$, and maximum levels of enniatin H ($781.9\;{\mu}g/g$), I ($725.8\;{\mu}g/g$), and MK1688 ($425.8\;{\mu}g/g$) were measured by high pressure liquid chromatography (HPLC) at the same temperature. The optimal moisture content for the production of beauvericin and enniatins H, I, and MK1688 was 40%, and the trace amounts of these toxins were observed at 10% moisture content. Sixty five grain samples (n=65) were tested for the monitoring of beauvericin. This mycotoxin was detected in six grain samples including three maize, two barley, and one wheat samples. The highest contamination level of beauvericin was observed in maize sample ($0.23\;{\mu}g/g$).

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1340-1346
• /
• 2005

A water quality modeling study was performed for Chunggye stream during combined sewer overflow(CSO) period, utilizing the diagnostic system for water management in small watershed, CREEK-1(Cyber River for Environment and Economy in Korea). This system integrated geogaphic information system, data base, landscape ecological model(FRAGSTATS), watershed model(SWMM), water quality model (WASP5), and computer graphic. In this study, the watershed model and water quality model were extensively utilized so as to simulate water qualities and flow in Chunggye stream during wet periods. The Chunggye stream watershed was divided into 18 sub-basins in the watershed model and the stream reach into 11 segments in the water quality model. The watershed model was validated against field measurements of BOD, TN, TP, and flow at the downstream location, where the model results showed a reasonable agreement with the field measurements at all parameters. From this study, it was shown that the stream water quality would change along with elapsed time from rainfall start as well as rainfall intensity. The model results indicated that the water quality would significantly upgrade due to the first flush and high sewage ratio of CSO at the beginning of rainfall event, but become degraded along with the runoff increase due to dilution effect.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.6
• /
• pp.603-612
• /
• 2006

The study with laboratory sandbox model has been carried out to address potential use of reclaimed water, as a way for artificially recharging the coastal aquifer, to effectively prevent from seawater intrusion. To do this, we assessed hydraulic and geochemical properties depending upon various extraction and recharging conditions. While solely being recharged, the intrusion could be significantly retarded than those of recharge and extraction implied together. At 0.5 to 2 for the ratio of the extraction over the recharge rate, the fresh water was exploited from the tank, where the void regime was simultaneously saturated with the recharged water. In the meantime, the saline water zone was diluted and back-tracked by the recharged water due to forming a hydraulic geochemical barrier around the injection well. However, if the ratio was being increased to greater than 4, saltwater more deeply intruded to the freshwater zone because the artificial recharge was not sufficiently supplied to timely back-fill the void space. When the aquifer water was intermittently extracted at the ratio of $0.5{\sim}2$ over the recharge rate, the value of S.M.I. decreased, but increasing it to more than 4 unlikely escalated the value of S.M.I as much as $3{\sim}47%$ indicating that the salt water intruded. It finally revealed that the proper ratio of extraction/recharge or intermittent extraction would efficiently retracted seawater intrusion while the freshwater sources could be conservatively utilized.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2016

In order to obtain efficient control effect of the pesticide, it is important to ensure uniform adhesion to the desired plant parts at the right time. Pesticide spray method (application technology) is an important factor affecting the efficacy and crops persistent expression. The aim of this study was to develop an efficient system to investigate the coating weight distribution of citrus leaves due to the difference between the nozzle and spray sprinkler system using dithianon used in citrus scab. Other An, engine type sprayer was used as the control. Speed sprayer and different sprinklers were wsed to way the deposit amounts of dithianon on citrus leaves. The test was conducted at the National Institute of Horticultural Herbal Science Citrus Research Station, located in the circle citrus Jeju Island. In order to examine whether the citrus orchard spray and the evenl on the whole, dithianon (43% flowable 1000-fold dilution) was sprayed, filter paper and leaves were analyzed by the height as top, middle, bottom. Speed sprayer the was most effective on depositing at the middle position, of the leaves. All other sprays the leaces except the dry mist sprinkler were not effective enough to deposit on the back sides. To achieve more deposits on the high position leaves, an improve ment in the nozzle and an efficient power system of sprayer were needed.

• The Korean Journal of Pesticide Science
• /
• v.12 no.3
• /
• pp.277-282
• /
• 2008

To assess the resistance to prochloraz, $EC_{50}$ values of Fusarium isolates obtained from rice seed were investigated through the agar dilution method. $EC_{50}$ value of 36 isolates of Fusarium spp. to prochloraz ranged from 0.020 to $1.78{\mu}g\;mL^{-1}$ with an average of $0.25{\mu}g\;mL^{-1}$. According to the species of Fusarium, the average $EC_{50}$ value was fluctuated; $0.091{\mu}g\;mL^{-1}$ for F. moniliformis, $0.11{\mu}g\;mL^{-1}$ for F. proliferatum and $0.31{\mu}g\;mL^{-1}$ for F. fujikuroi. The resistant baseline was decided at $0.5{\mu}g\;mL^{-1}$ to determine if the isolate was resistant to prochloraz or not. Based on the resistant baseline, the ratio of resistant isolates was 14%. There was no correlation between the resistance to prochloraz and the pathogenicity of Fusarium spp. on rice seedlings. The resistant isolates of F. fujikuroi did not show the cross-resistance to other sterol biosynthesis inhibiting fungicides, triflumizole, hexaconazole, difenoconazole and tebuconazole.

• The Korean Journal of Pesticide Science
• /
• v.4 no.2
• /
• pp.37-43
• /
• 2000

Effects of silicon application on development of colonies of Sphaerotheca fuliginea were examined. Cucumber plants were applied with nutrient solutions amended with different concentrations of soluble silicon and selected leaves were inoculated with known concentrations of conidia of the pathogen. Colony number per leaf, colony area per leaf, and germination rate of conidia of S. fuliginea collected from the inoculated leaves were reduced as silicate concentrations in the nutrient solutions increased from 0.05 to 4.10 mM. The increase in resistance of plants to mildew infection was apparently due to silicate accumulation in leaves, and there was no correlation between cation or ionic strength effects and the silicate treatments. Silicate treatment in growth medium remarkably suppressed powdery mildew development on cucumber. Colonies of mildew fungus were visible with over approx. 38.3% of the mature leaf surface, while that of the leaves in high Si plants was 2.3% observed at 51 days after transplanting. No significant differences were observed between 1.7 mM and 3.4mM silicate treatments. Conidial germination rates were significantly reduced by increasing Si amendments. Conidial germination ranged from 14.7 to 20.3% for plants grown in low Si solution(<1.40 mM), and from 9.0 to 12.4% for plants grown in high Si solution(>1.8 mM). Foliar applications of Si with ${\geq}$ 17.0 mM decreased the number of powdery mildew colonies. Persistence of Si foliar sprays effects on cucumber demonstrated that the 17 mM Si spray applied 4 days before inoculation with S. fuliginea reduced mildew colony formation. The relationship was positive and linear.

• The Korean Journal of Pesticide Science
• /
• v.13 no.4
• /
• pp.241-248
• /
• 2009

Pre-Harvest Residue Limit (PHRL) of bifenthrin during cultivation of grape was established by utilizing the dissipation curve and biological half-life of bifenthrin calculated from the analysis of 0, 1, 2, 3, 5, 7, 10, 15 days after treatment of bifenthrin. Grape sample was extracted and partitioned with acetonitrile and dichloromethane, respectively, and bifenthrin was determined with GC/ECD. Limit of quantitation (LOQ) of bifenthrin was 0.01 ng. Recoveries at two fortification levels of 0.1 and $0.5\;mg\;kg^{-1}$ were $104.08\;{\pm}\;1.24$ and $92.25\;{\pm}\;3.13%$, respectively. The biological half-lives of bifenthrin were about 21 days at standard application rate, while, 23 days at double application rate. Dissipation of bifenthrin on grape was not influenced by growth dilution effect. The PHRLs of bifenthrin were recommended as 0.60 and $0.55\;mg\;kg^{-1}$ for 10 and 5 days before harvest, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.1
• /
• pp.27-34
• /
• 2002

The performances of fish culture were evaluated in the integrated recirculating aquaculture system consisting of a double drain type rearing tank ($2.5 m^3$), a sedimentation tank, a floating bead filter, a foam separator and a rotating biological contactor. A system was stocked with nile tilapia at an initial rearing densities of $5\%$ (A), $5\%$ (B) and $7\%$ (C) oyer 30 days. Feed coefficient was 1.62, 1,79 and 1.80 and average daily growth rate was $0.452\%$, 0.u5% and $0.423\%$, respectively. The level of TAN was maintained below $1 g/m^3$ for $5\%$ of initial rearing density and $2-4 g/m^3$ for $7\%$. The dissolved oxygen level ($2-4 g/m^3$) was not optimum but should not be inhibitory to fish growth. The total suspended solid was completely removed during overall experimental period.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.637-643
• /
• 2008

When planning outfall system, the first target cif design is to maximize initial dilution of discharge effluent. To achieve the target effectively, the characteristics of mixing phenomenon between ambient and discharged water should be analyzed. Especially the analysis at the Near-Field-Region(NFR) as initial dilution zone should be preceded. Usually, the initial behavior of effluent through outfall system is rising toward the surface due to mixing with ambient water for heat discharge and sinking toward the bottom due to the difference of density for brine discharge. After mixed with eddies accompanied by the ambient water, the plumes are showing the same density and internal current pattern by advection and diffusion. Until recently, lots of studies are being carried out for the optimum design of outfall system. but it is difficult to find any studies of heat and brine discharge at the same time. Therefore, this study is hoped to provide some basic data for optimum design of outfall system.