• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.4
• /
• pp.82-87
• /
• 2013

A study on desorption and regeneration characteristics for silver ions adsorbed onto crab shells was carried out by means of Nitric acid soultion which was selected as the best desorbing agent. Desorption efficiency for silver ions was the highest as about 96% at the 1.0M of Nitric acid concentration. Also, silver ions was almost desorbed below 1.0 of S/L(mg/mL) ratio which is defined as the ratio of adding amount of adsorbent and volume of desorbing agent and most of desorption process was completed within 60min. And removal efficiency of reused crab shells for silver ions was maintained as about 92% until the 2nd cycle.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.2
• /
• pp.104-113
• /
• 2002

The sorption of Cd$^{2+}$ on calcite was studied in aqueous solutions of several electrolytes. The Cd$^{2+}$ concentration, 10$^{-8}$ M, was kept well below saturation with respect to CdCO$_3$(s). Sorption behavior of Cd$^{2+}$ in different ionic strengths of NaClO$_4$solutions shows that sorption is independent of ionic strength. This result suggests that Cd$^{2+}$ sorption on calcite surface is of a specific nature, and adsorption is controlled by an inner-sphere type of surface complex. Two stages in the sorption behavior could be identified: an initial rapid uptake, followed by slower uptake reaching a maximum steady state by 145 hrs. No evidence was observed for surface precipitation, although it can not be entirely ruled out. Desorption of Cd$^{2+}$ from the calcite surface after resuspension into Cd-free solution is initially very rapid, but depends partly on the previous sorption history. Desorption behavior of Cd$^{2+}$ show that an initial rapid desorption followed either by slow uptake reaching a maximum, as in the adsorption experiments, or slowing desorption to reach a steady state minimum. This irreversible behavior of Cd$^{2+}$ sorption and desorption may act as one of the controls for regulating the mobility of dissolved Cd$^{2+}$ natural aqueous systems. Calculated adsorption partition coefficients suggest that overall sorption and desorption process in the concentration range are controlled by d single mechanism.ingle mechanism.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.3
• /
• pp.23-28
• /
• 2007

A number of batch isotherm and electrokinetic experiments were conducted in order to investigate the migration of zinc and its removal efficiency during electrokinetic soil processing. Sorption and desorption characteristics of zinc spiked kaolin clay have been examined by comparison with electrically induced desorption and precipitation occurring in the anode and cathode regions, respectively. The removal efficiency of zinc under the applied voltage gradient of 300 V/m was found to be up to approximately 80 % within 4 hours of the electrokinetic treatment. The study is significant with respect to the remediation of contaminated areas.

• Clean Technology
• /
• v.19 no.3
• /
• pp.347-350
• /
• 2013

Desorption characteristics for ions adsorbed onto sericite was performed by means of $HNO_3$ solution which was selected as the best desorbing agent in the previous work. Elution of nickel ions adsorbed onto sericite using $HNO_3$ solution was confirmed by means of scanning electron microscopy (SEM) & energy dispersive X-ray spectroscopy (EDX) analysis. Desorption efficiency for nickel ions was 100% at the 20 mM of concentration. Also, nickel ions was completely desorbed within 1.0 of S/L (mg/mL) ratio which is defined as the ratio of adding amount of adsorbent and volume of desorbing agent and desorption process was quickly carried out within 60min. Finally, removal efficiency of reused sericite for nickel ions was constantly maintained until the 4th cycle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2439-2444
• /
• 2011

We investigated the adsorption/desorption property of volatile organic compounds(VOC) by using activated carbon fibers(ACF) instead of activated carbon(AC) which is conventionally used. The adsorption behavior of the fixed bed and the breakthrough characteristics were also studied. As a result, ACFj showed 1.15 times higher adsorption amount as compared to AC. The breakthrough Point and adsorption amount of VOCs were decreased with the increase of temperature. In the case of AC, desorption time having 99% removal efficiency was about as minutes, but that of ACF was about 5 minutes at same condition.

• Analytical Science and Technology
• /
• v.8 no.2
• /
• pp.205-213
• /
• 1995

Counter-diffusion of coronene desorbed from alumina with addition of tetra-phenylporphine was studied by spectrophotometry. The counter-diffusion processes of adsorbing and desorbing materials in liquid phase were simulated by counter-diffusion model based on Fritz's binary component isotherm under an assumption of equimass diffusion. The counter-diffusivities of desorbed coronene with addition of tetra-phenylporphine were as ${\sim}10^{-15}m^2/sec$ and that of adsorbed tetra-phenylporphine as ${\sim}10^{-11}m^2/sec$. The counter-diffusivity of coronene determined from desorption process was smaller by ${\sim}10^5$ times than the diffusivity determined from adsorption process of a single species. The reduction of the determined counter-diffusivity of coronene in desorption process was explained by the cross of diffusion fluxes and build-up of high gradient of coronene in pore.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.608-614
• /
• 1999

The counter-diffusion of aromatic compounds such as coronene and tetra-phenylporphine by injection of acetone or tetra-phenylporphine solution was studied on aluminas and silica-alumina used widely as catalysts support. The counter-diffusivity was determined from simulation results by using the counter-diffusion model employing ideal adsorbed solution theory. The counter-diffusivities of aromatic compounds in the catalyst supports were ranged in ${\sim}10^{-15}m^2/sec$ in the desorption process by the injection of excess acetone. In the counter-diffusion process with tetra-phenylporphine solution which have similar concentration with adsorption solution, the counter-diffusivities of coronene were also ${\sim}10^{-15}m^2/sec$, and that of tetra-phenylporphine into pores were determined as ${\sim}10^{-11}m^2/sec$. The counter-diffusivities of coronene desobed from the adsorbent were significantly redyced in comparison with the effective diffusivities when there is counter-diffusion flux. The values mainly depended on the existence of counter-diffusion flux, but not concerned with the species and amount of desorbates.

• Journal of the Korean Vacuum Society
• /
• v.4 no.2
• /
• pp.142-149
• /
• 1995

본 연구에서는 새로운 장전자 방출법(DOFEC법)으로 W(210)면의 수소 흡착에 의한 일함수의 변화, heat of desorption에 대하여 연구하였다. 텅스텐(210)면에 수소가 흡착될 때 흡착율에 따라 일함수가 증가하다가 다시 감소하는데 이것은 수소가 처음에는(210)면의 step((100)면)에 흡착되고 dose를 증가시킴에 따라 terrace((110)면)에 흡착되기 때문임을 알았다. 즉, terrace보다 step의 sticking coefficient가 더 크며 zero coverage에서의 그 비는 2.57이며 이는 타 연구 결과와 잘 일치한다. (210)면의 step과 terrace의 수소 흡착에 대한 일함수의 정량적인 변화량 그리고 수소 dose량에 대한 각각의 면에 대한 상대적인 흡착율을 얻었으며, 이 결과는 독립된(110)면 또는 (100)면의 결과와 잘 일치됨을 알았다. 또한 이 결과는 흡착 실험에 있어서 dose량을 흡착률로 환산하는데 사용될 수 있다. 텅스텐(210)면에는 4개의 흡착 site가 존재하며 이 site들 중 $\beta$2과 $\beta$4 state는 second order 탈착 과정을 따르며 $\beta$1과 $\beta$3 state는 first order 탈착과정을 따른다. 따라서 텅스텐(210)면에는 수소가 해리적 흡착을 함과 동시에 비해리적 흡착도 함을 알았으며(210)면의 각 흡착 site를 이에 대응되는 (100)면과 (110)면의 흡착 site와 비교 검토하였다.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.117-127
• /
• 2008

The characteristics of phosphate adsorption-desorption on kaolinite was studied by batch adsorption experiments and detailed adsorbed state of phosphate on kaolinite surface was investigated using ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared) spectroscopy. The phosphorous contents were measured using UV-VIS-IR spectrophotometer with 820 nm wavelength. The adsorbed P was generally increased with increasing pH value in the range of pH 4 to pH 9, however it is not distinct. Moreover the adsorbed P was significantly changed with different initial phosphate concentration. The adsorption isotherms were well fitted with the Langmuir equation, Temkin equation, and Freundlich equation in descending order. The maximum Langmuir adsorption capacity of kaolinite KGa-2 is 232.5 ($204.1{\sim}256.5$) mg/kg and has very higher value than that of kaolinite KGa-1b. Most of adsorbed phosphate on kaolinite were not easily desorbed to aqueous solution, but might fixed on kaolinite surface. However it needs further research about the exact desorption experiment. It was impossible to recognize phosphorous adsorption bands on kaolinite in ATR-FTIR spectrum from kaolinite bands themselves, because the absorption peaks of phosphorous have very similar positions with those of kaolinite, and the intensities of the former were very weak in comparison with those of the latter.

• Korean Chemical Engineering Research
• /
• v.46 no.6
• /
• pp.1130-1134
• /
• 2008

Acetic acid has been used as a solvent in the process of manufacturing terephthalic acid. Although the used acetic acid has been mainly separated and recovered through the distillation process, adsorption process can be applied to recover a small amount of acetic acid remaining in the stream after the distillation process. In this study, activated carbon was selected as an adsorbent for acetic acid and the effects of temperature and acid treatment on adsorption capacity were investigated. The adsorption capacities of activated carbon for acetic acid were 0.176 mmol/g at 303 K and 0.118 mmol/g at 343 K, respectively. Adsorption capacity decreased with increasing temperature. The acid treatment of the activated carbon induced the increase in adsorption capacity, which was ascribed to increase in surface functional groups such as phenolic hydroxyl groups and carboxilic acid groups on the carbon surface. In the results of acetic acid desorption, 89% of adsorbed acetic acid was desorbed from activated carbon.