• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.189-198
• /
• 1994

The adsorptive behaviors of carbon monoxide and methanol over $V_2O_5$catalyst were studied by means of thermal desorptlon spectroscopy (TDS) under ultrahigh vacuum conditions. Carbon monoxide adsorbed on oxygen-deficient V sites as well as on V=O groups of the $V_2O_5$ surface. CO adsorbed on the V sites desorbed at 380 K while CO adsorbed on the V=O groups formed carbonate species with surface oxygen of $V_2O_5$ and desorbed as $CO_2$ resulting in the reduction of the surface of she $V_2O_5$catalyst. The amount of CO adsorbed in the form of carbonate species increased by both the pre- and post-adsorbed oxygen. The adsorptive behavior of methanol over the catalyst was studied by thermal desorption experiments of $CH_3OH$, HCHO, CO, and $H_2$ upon methanol adsorption at 298 K. The results showed that methanol was adsorbed dissociatively on the $V_2O_5$catalyst as methoxy and hydroxyl groups at 298K.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.50-50
• /
• 2002

물리흡착은 기체와 표면간의 상호작용이 반데르발스 힘에 의한 흡착현상으로 평형상태에서 물리적인 조건 변화만으로 흡착과 탈착이 가능하다. 이러한 흡착측정 데이터는 흡착 시스템에 대한 다양한 정보를 제공해주게 된다. 기체와 표면간의 상호작용 포텐셜, 흡착된 물질의 물리적 상태, 흡착막의 두께, 흡착구조, 흡착량 등이 결정될 수 있다. 이러한 정보는 흡착 및 탈착 등온곡선의 분석을 통하여 사용된 흡착제의 비표면적 및 기공의 기하학적 구조에 대한 것도 유추할 수 있게 한다. 본 실험실에서는 흡착량을 직접 측정하는 체적식 흡착측정 방법, 흡착량을 간접적으로 측정하는 광 및 관련 흡착시스템 및 수정진동자를 이용한 박막에서의 흡착측정 방법들을 소개하며 기공표준화에 적용하고자 한다.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.737-741
• /
• 1997

The typical removal method of volatile organic compounds is adsorption process. In this study, granular activated carbon and activated carbon fiber were used as adsorbents, and the adsorption behavior for the two types of adsorbent was compared. And they were regenerated by supercritical carbon dioxide extraction at a constant temperature, 318.15 K, and 2000, 2500, 3000 psi respectively. The desorption percentage of initial adsorbates and iodine values were increased with pressure of supercritical carbon dioxide. The regeneration time was 70 and 60 minutes in adsorbents loaded with methyl ethyl ketone(MEK) and benzene, respectively. The desorption percentages were 64.0% for granular activated carbon and 55.3% for activated carbon fiber loaded with MEK, and 59.1% for granular activated carbon and 45.2% for activated carbon fiber loaded with benzene. The exit concentration could be evaluated by Tan and Liou model. Therefore, the granular activated carbon and the activated carbon fiber could be regenerated by supercritical fluid extraction process.

• Journal of the Korean Vacuum Society
• /
• v.17 no.3
• /
• pp.183-188
• /
• 2008

We have studied the chemisorption of oxygen at room temperature on Fe layers deposited on Pt(111) substrates by using core-level X-ray photoelectron spectroscopy. It was found that the oxygen atoms are chemisorbed when the thickness of the Fe layers is not larger than 6 monolayers. Upon post-annealing, it was found that part of the chemisorbed atoms are desorbed at a temperature range 600 - 700 K, after which the intermixing between Fe and Pt atoms occurs. The overall trend of this intermixing was very similar to the Fe/Pt(111) surface without oxygen exposure. The remaining oxygen adatoms, the amount of which is about a half of the total, were found to be eventually desorbed from the surface upon post-annealing at 1000 K. The binding energy of this phase was higher than that of the oxygen atoms desorbed at lower temperatures by 1.3 eV.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.1
• /
• pp.26-34
• /
• 2005

The effects of soil-chemical contact time (aging) on sorption and desorption of atrazine were studied in soil slurries because aging is an important determinant affecting on the sorption and desorption characteristics of organic contaminants in the environment. Sorption isotherm and desorption kinetic experiments were performed, and soilwater distribution coefficients and desorption rate parameters were evaluated using linear and non-linear sorption equations and a three-site desorption model, respectively. Aging time for sorption of atrazine in sterilized soil slurries ranged from 2 days to 8 months. Atrazine sorption isotherms were nearly linear $(r^2\;>\;0.97)$ and sorption coefficients were strongly correlated to soil organic carbon content. Sorption distribution coefficients $(K_d)$ increased with increasing aging in all soils studied. Sorption non-linearity did not increase with increased aging except for the Houghton muck soil. Desorption profiles were well described by the three-site desorption model. The equilibrium site fraction $(f_{eq})$ decreased and the non-desorbable site fraction $(f_{nd})$ increased as a function of aging time in all soils. In all soils studied, it was found that when normalized to soil organic matter content the concentration of atrazine in desorbable sites was comparatively constant, whereas that in non-desorbable site increased as aging increased.

• Applied Chemistry for Engineering
• /
• v.2 no.2
• /
• pp.127-137
• /
• 1991

The dissociation and partial oxidation of $CH_3OH$ on polycrystalline $MoO_3$ powder catalyst were studied using thermal desorption spectrometry(TDS) under high vacuum condition. $CH_3OH$ was dissociatively adsorbed on $MoO_3$ in the forms of surface methoxy($-OCH_3$) and atomic hydrogen(-H). $CH_3OH$ desorbed at 425 K via the re-association of methoxy and adsorbed hydrogen atom, and HCHO desorbed at 545 K through the bond breakage of C-H in methoxy. Water TDS spectra showed two desorption peaks, that is, ${\alpha}$-peak at 428 K and ${\beta}$-peak at 586 K. It was suggested that ${\alpha}$-peak was due to the hydroxyl formed on $MoO_3$ surface during the dissociation of $CH_3OH$, and that ${\beta}$-peak was from the association of lattice oxygen and surface hydrogen atom formed by the bond breakage of C-H in methoxy. Pre-adsorbed oxygen on the surface of $MoO_3$ catalyst increased the amount of adsorption of $CH_3OH$ by promoting the dissociation of $CH_3OH$ on the surface, whereas pre-adsorbed water decreased the amount of adsorption of $CH_3OH$ by blocking of adsorption sites for $CH_3OH$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.1
• /
• pp.1-6
• /
• 2001

Biosorption of Pb and Cr by Sargassum confusum was evaluatet at in the various conditions. The uptake capacities for Pb and Cr were 197.5 mg Pb/g biomass and 133.1 mg Cr/g biomass, respectively. The adsorption parameters for Pb and Cr were determined according to the Langmuir and Freundlich model. Biosorption of Pb and Cr was increased with the increase of pH value. Pb and Cr adsorbed by S. confusum could be recovered by desorption process with 0.1 M HCl, 0.1 M $HNO_3$ and 0.1 M EDTA. The ratio of Pb desorption was above $93\%$, whereas the ratio of Cr desorption was below $30\%$.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.34-36
• /
• 2007

마이크로파를 이용하여 활성탄의 재생과 톨루엔의 흡착회수에 관한 연구를 실행하였다. 마이크로파에 의하여 흡착된 활성탄의 톨루엔의 탈착온도를 얻었을 수 있었으며, 흡착제의 방전 문제를 극복할 수 있는 벤토나이트 광물을 이용한 구형활성탄을 제조하였다. 마이크로파를 이용하여 흡착제에 흡착되어진 톨루엔을 탈착하여 흡착제를 재생하였으며, 냉각 응축 장치를 이용하여 톨루엔을 회수하였다.

• Clean Technology
• /
• v.20 no.2
• /
• pp.179-188
• /
• 2014

The effect of desorption pressure on $CO_2/N_2$ breakthrough behaviors for 4 different adsorbents was studied at a fixed bed. Zeolite 3A, 4A, 5A, and 13X pellets were used as adsorbents. Cyclic operations were executed with varying desorption pressure from vacuum (0 bar) to 3 bar while other conditions such as adsorption step pressure (3 bar), temperature (293 K), composition ($CO_2:N_2=10:90$vol%) and flow rate (400 ccm) were fixed at constant values. Each adsorption and desorption step was set as 80 min, which totaled up to 160 min per a cycle. 5 cycles with adsorption and desorption steps were run overall. After the experiment, breakthrough time, saturation time, and adsorption amount were measured and compared in order to find an optimum adsorbent and a proper operating condition for a post combustion $CO_2$ capture process.

• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.445-451
• /
• 2008

In order to regenerate the activated carbon polluted by volatile organic compounds (VOCs) using microwave, adsorption and desorption characteristics of benzene over activated carbon (AC) coated with insulating materials were investigated. Physical characteristics of activated carbon and insulator-coated ACs were investigated by means of $N_2$ gas adsorption and scanning electron microscopy (SEM). The amount of VOC adsorbed showed a positive relationship with the specific surface area of the ACs, and spark discharge over insulator-coated ACs did not occur. Potassium silicate (PS) was the best binder for coating of insulating materials on AC. Amount of benzene desorbed by microwave irradiation was dependent on output power of microwave. Nearly same performance was obtained even though the adsorption-desorption operation under microwave irradiation was repeated 5 times. Finally, it was known that the microwave heating was a very effective mean for regenerating the polluted AC.