• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.335-339
• /
• 2014

The studies on the characteristics of composite of silica aerogel and pulps were carried out. The composite was manufactured by mixing the paste of silica aerogel and pulps and analyzed by SEM. Using the impedence tube, the sound absorption measurement was investigated. The maximum value of sound absorption coefficient of this composite was obtained in the range of 900 Hz. It was found that the composite of silica aerogel and pulps could be a new sound absorbent because of high absorption capacity and durability which was due to hydrophobic effect on the surface of the composite.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.2
• /
• pp.152-160
• /
• 2023

Sound barrier walls are the most basic way to cope with noise problems in urban residential environments. The most important acoustic function of sound insulation board is represented by sound transmission loss and sound absorption coefficient. However, Korea has not yet established a standard for measuring the sound absorption rate of sound insulation boards. In addition, even in the European standard, where the overall acoustic standard of soundproofing boards has already been established, the sound absorption rate is applied only to the standard for measuring the sound absorption rate of general building finishing materials, and a separate measurement method considering the characteristics of soundproof walls and soundproofing boards is not presented. The sound absorption coefficient should be evaluated by summing up the energy absorbed into the material as well as the energy transmitted through the material, but the current European standard has a problem in that the transmitted sound energy is not taken into account. In this paper, we reviewed the sound absorption coefficient measurement standards of sound insulation boards currently being presented, and verified the difference between the results and the new measurement method considering transmission sound for sound insulation boards actually used in Korea.

• Journal of Adhesion and Interface
• /
• v.11 no.1
• /
• pp.3-8
• /
• 2010

Thermal properties, flame retardant property, and sound-damping properties of polyurethane (PU) nanocomposite foams prepared with oligomeric 1,2-propanediol isobutyl polyhedral silsesquioxane (POSS) were investigated. It was found that the PU nanocomposite foams showed good sound-damping performances comparing to the PU foams without POSS.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1190-1193
• /
• 2006

It is important to consider absorption characteristics of building interior decoration materials when we design a building and simulate acoustics in a room. The purpose of this study is to accumulate acoustic data on building interior decoration materials and give a basic data for improving absorption performance by testing absorption coefficient of 9 types of ceiling materials, 14 types of wall paper and 20 types of floor papers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.399-402
• /
• 2009

Acoustic design parameters of a Helmholtz resonator are studied experimentally and numerically for acoustic stability in a model acoustic tube. According to standard acoustic-test procedures, acoustic-pressure signals are measured. Quantitative acoustic properties of sound absorption coefficient are evaluated and thereby, the acoustic damping capacity of the resonator is characterized. Helmholtz resonator on spring-damper system use were understanding for acoustic damping. The length of orifice and the volume of cavity of resonator are selected as design parameters for tuning of the resonator. Acoustic- damping capacity of the resonator increases with its cavity volume. And orifice length as increases with acoustic damping capacity was decreased.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3
• /
• pp.45-50
• /
• 1997

Four different wedge angle absorptive tiles were designed and made, and the magnitudes of the reflected acoustic fields by the wedge shaped underwater sound absorptive tiles were measured. The minimum magnitude was found at the angle of 30$^{\circ}$ and the maximum of it was found at the wedge angle of 120$^{\circ}$ from measured the reflected acoustic fields at the front sides of the tiles. The fact that as wedge angle of the absorptive tile increases, the reflection coefficient is increasing is verified. The measured reflected acoustic fields were not dependent on the frequency in the range of 10kHz~30kHz used in this experiment for the same wedge angle tile. The measured reflected acoustic fields at the back sides of the tiles show that they are independent from both type of the absorptive tiles and the frequencies used in the experiments. The measured values and the computed values by the numerical model for the reflected acoustic fields of the wedge shaped absorptive tiles are fairly well comparable with one another.

• Journal of the Korea Concrete Institute
• /
• v.15 no.4
• /
• pp.566-573
• /
• 2003

This study was performed to manufacture a rigid sound absorbing material by increasing the continuous void ratio of cellular concrete, thereby achieving an increase in sound absorption ratio and an enhancement in strength of the cellular concrete. By the experiments, it was determined that an increase in sound absorption ratio is achieved by increasing the added amount of air voids, thereby increasing the continuous void ratio. When the material had a thickness of 5 cm, a satisfactory average sound absorption ratio of 70% was obtained at a continuous void ratio of 40% or more. An increase in the thickness of the sound absorbing material resulted in an increase in sound absorption ratio in a super bass range. The specific gravity of cellular concrete meeting an average sound absorption ratio of 70% was 0.4 at a material thickness of 5 cm, and 0.6 or less at a material thickness of 7 cm. The compressive strength of the cellular concrete having a specific gravity of 0.4 meeting an average sound absorption ratio of 70% or more was 1.37 Mpa at a cement fineness of 3,000. This compressive strength was increased to 3.34 MPa at a cement fineness of 8,000. Accordingly, it was determined that the compressive strength of cellular concrete having continuous voids increases with a higher cement fineness.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.273-276
• /
• 2000

본 연구에서는 무반향 수조의 내벽 흡음 물질로 사용되는 무반향 타일을 쐐기형으로 제작하여 쐐기의 꼭지 각 변화에 따른 음향학적인 특성을 고찰하였다. 실험에서 사용된 쐐기형 무반향 타일의 크기는 $40{\cal}cm{\times}38.5{\cal}cm$ 이며, 타일을 구성하는 각 쐐기의 길이는 $2.75{\cal}cm$로 고정하고 각각 쐐기의 꼭지각이 $30^\circ$ 와 $60^\circ$ 인 타일을 제작하였다. 수중에서 쐐기가 없는 무반향 시료와 쐐기형 무반향 타일에 음파를 수직 입사하여 반사계수를 측정하였으며, 쐐기의 유무와 무반향 타일을 구성하는 쐐기의 꼭지각 변화에 따른 반사 및 흡음 특성을 고찰하였다. 음향특성 임피던스가 $2.14\times10^6$ Pa$\cdot$s/m인 쐐기형 무반향 타일을 25kHz 에서 100kHz의 주파수 영역의 음파를 입사했을 애 쐐기의 꼭지각이 $30^\circ$ 일 때 $60^\circ$보다 압력반사계수가 작고, 반사손실이 증가함을 알 수 있었으며, 그 결과로써 본 실험에서 사용된 $30^\circ$의 쐐기 꼭지각을 갖는 무반향 타일이 내벽 흡음 물질로서 성능이 더 좋다는 것을 확인하였다.

• Fire Protection Technology
• /
• s.24
• /
• pp.13-16
• /
• 1998

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2017

In this study, a test-bed system simulated a tunnel and concrete track is tested on cite and invested an allowed limit of multi-layered sound absorbing panel for reducing noise reflected on the concrete track in train tunnel considering the criteria and limitation on the theoretical back ground. The studied results are an effective evaluating system of the sound absorbing coefficient influenced fluid effects depending on the vehicle speed in the urban train tunnel and measuring not only structural behaviors of maximum displacement and acceleration of the panel but also dynamic characteristics of damping ratio and natural frequency.