• The Journal of the Acoustical Society of Korea
• /
• v.5 no.2
• /
• pp.39-47
• /
• 1986

흡음 계수는 흡음재의 흡음 특성을 제시해 주는 기본적 물리량이다. 본 연구에서는 일반적으로 흡음재로 사용되는 흡음재의 흡음 특성을 알기 위해 두께 18mm, 직경 105mm인 10종의 흡음재를 택하 여 흡음재의 흡음 계수를 구하였다. 이를 위해 impedance tube를 제작하여 관내에 흡음재를 넣은 후 관 내에 만들어진 정상파의 최대 음압과 최소음압의 비, 정상파비를 이용하여 흡음 계수를 구했다. 그 결과 흡음재의 흡음 특성은 진동수, 흡음재으 lwowlf, 두께 및 다공성에 크게 의존해 스폰지, 유리 섬유 등의 흡음 효과가 좋게 나타났으며 특히 같은 두께의 동일 흡음재일지라도 흡음재 뒷면의 공기층을 적절리 조절함으로써 특정 진동수 근처에서의 흡음 효과를 증대시킬 수 있었다.

• Journal of the KSME
• /
• v.33 no.1
• /
• pp.14-21
• /
• 1993

본 해설에서는 가정용 진공청소기에서 일반적으로 사용되는 진동 . 소음 측정기법과 진공청소 기의 저소음화를 위해 별도로 고안된 흡음방이 장착된 진공청소기에 대한 측정예를 소개하였다. 본 해설에서 다룬 흡음방은 일반적인 소음기의 원리를 응용한 장치로서 저소음화가 특히 요구 되는 가정용 진공청소기의 효과적인 차음장치로 사용가능함도 확인하였다. 추가적으로 진행될 과제는 흡기구에서 배기구에 이르는 진공청소기 본체 내부의 긴유로에 대한 개선과 흡음방 내에 부착되는 보다 우수한 흡음제의 개발, 진공청소기의 전 부분에 대한 기밀유지 등이 있을 수 있 으며, 위의 분야에 대한 추가적인 지식들이 보강된다면 흡음방의 효과를 보다 높일 수 있는 전체 시스템이 형성될 수 있을 것이다. 음 저감의 효과를 감안할 때 수용 가능한 정도라 판단된다.

• Journal of KSNVE
• /
• v.8 no.1
• /
• pp.146-156
• /
• 1998

To mitigate excessive noise from highways, and high speed rail road, it is often necessary to construct a noise barrier. Absorptive barroer attenuation solution is obtained for the problem of diffration of a plane wave sound source by a semi-infinite plane. A finite region in the vicinity of the edge has an highly absorbing boundary condition ; the remaining portion of the half plane is rigid. The problem which is solved is a mathematical model for a hard barrier with an absorbing edge. If the wavelength of the sound is much smaller than the length scale associated with the barrier, the diffraction process is governed to all intents and purpose by the solution to a standard problem of diffraction by a semi-infinite hard plane with an absorbent edge. It is concluded that the absorbing material that comprises the edge need only be of the order of a wavelength long to have approximately the same effect, on the sound attenuation in the shadow side of the barrier. Traffic noise is composed of thousands of sources with varying frequency content. To simplify noise predictions when barriers are present, an effective frequency of 550Hz may be used to represent all vehicles. The wavelength of sound at f=550Hz for traffic noise is about 2 feet. According to the above conclusion, an absorptive highway noise barrier is only needed to cover to cover approximately a 2 foot length of absorbing material. It would be more economical to cover only the region in the immediate vicinity of the edge with highly sound obsorbent material.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.157-160
• /
• 2000

흡음원리의 측면에서 저음의 흡음은 재료 자체에서의 효과보다는 그 재료의 배열에서 발생하는 공명등의 역할이 크다. 따라서 단일흡음재료 보다는 공명체나 판상재와 다공질 흡음재, 그리고 그 배후의 공기층에 의해 구성되는 복합적 흡음구조가 더욱 효과적인 저음흡음재가 될 수 있다. 본 연구에서는 여러 가지 목재나 철제의 슬릿, 그리고 철제나 MDF 재질의 유공판을 표면재료로 하는 저음흡음구조를 설계하기 위한 준비단계로서 저음흡음구조에서 표면재료의 번화가 가져올 수 있는 흡음특성의 차이를 알아보고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.323-330
• /
• 2018

This study investigated effects of absorbent gypsum board in the ceiling on low-frequency heavyweight floor impact sound through sound absorption coefficient and floor impact sound measurement. The sound absorption coefficients were measured with sound absorbent gypsum board, glass wool on gypsum board, and a double panel absorbent gypsum board (absorbent gypsum board + glass wool + absorbent gypsum board). Result showed that the absorbent gypsum board had sound absorption coefficient of 0.1 ~ 0.7 from 200 and 630 Hz octave band. The sound absorption coefficient was increased in all frequency range by adding glass wool. Additional absorbent gypsum board increased sound absorption coefficient up to 250 Hz octave band, but decreased over 250 Hz. Heavyweight floor impact sounds were measured in test building for three materials above, gypsum board, and bare slab. Result showed that glass wool on gypsum board and a double panel absorbent gypsum board reduced by 3 dB ~ 4 dB (single number quantity) heavyweight floor impact sound. Comparing with bare slab condition, floor impact sound reduction was mainly found from 125 Hz to 500 Hz octave band, and the maximum reduction was shown in the 250 Hz octave band.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.11a
• /
• pp.18-21
• /
• 2022

본 논문에서는 6 자유도 공간음향 렌더링 기술 관련 음향객체의 거리감 인지에 중요한 공기흡음 감쇠 효과 처리에 있어, 현장의 음원과 음향 센서 사이의 거리인 녹음거리에 해당하는 공기흡음 감쇠가 기본적으로 포함되어 3kHz 이상의 고주파 성분이 감쇠된 음원이 렌더링에 사용되는 문제점을 해결하는 방법을 제시한다. 이 방법에 의하면 6 자유도 공간음향 콘텐츠에 메타데이터로서 녹음거리 파라메터를 포함시키고, 렌더링할 때 공기흡음을 적용하기 위한 음원과 청취자의 거리값에 녹음거리에 대한 보상을 적용함으로써, 음원의 공기흡음 감쇠 효과를 정확하게 수정 적용하여 음원의 음색을 모든 거리에서 실제에 가깝도록 제공할 수 있게 된다. 특히, 원거리 녹음이 불가피한 비행기, 천둥, 폭발음 등 원거리 녹음음원의 음색에 녹음거리에 의한 음원의 공기흡음 감쇠가 적지 않은 영향을 미치게 되는데, 녹음거리의 적용에 의한 제안한 방법에 의해 음원과 청취자의 거리값에 대한 음원의 음색이 고주파영역의 녹음거리에 의한 원치 않는 감쇠를 보상하는 효과를 확인할 수 있었다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.139-144
• /
• 2015

Recently, to realize sound-absorbing structures, we have to insert sound-absorbing materials into wall. These shapes are taken limitations because sound-absorbing materials should be fixed. Therefore, the sound absorption is changed by environment that used the sound-absorbing materials. On the other hand, we will take same effect without sound-absorbing material, if we change the shape of wall to sound absorbing structure. If we use this sound absorbing structure, we can get benefits by removing limitation of materials. Therefore we suggest perforated plate for effective sound-absorbing structure. We confirmed the function of sound-absorption of this structure using equivalent property. Then, we found the similarity between perforated plate and resonator. Also, we verify these theories through computer simulation by FEM(Finite Element Method). Finally, we validated that perforated plate has function of sound absorption without sound-absorbing material. This perforated plate is used for sound-absorbing material of buildings and transportations such as vehicle, train etc. Also, these results could be further used basic tool for design of sound-absorption structure.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.673-674
• /
• 2013

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.3
• /
• pp.97-103
• /
• 2000

This study was performed to prove that vitrified slag can be utilized as sound absorbing materials by investigating on heavy metal elution and the properties of sound absorbing rate according to the thickness. The heavy metal elution experiment indicated that heavy metal was not eluted since it was fixed stable in the slag. Vitrified slag generally exhibited a maximum sound absorbing rate around at 600Hz-1kHz and 3kHz in the low and high frequency range, respectively. On the other hand, the absorbing rate increased beyond the range of 7kHz again. The sound absorbing rate varied a little according to the thickness of the material. However, Vitrified slag is likely to the effective as a sound absorbing wall material since it has a sound absorbing rate clover 80% in the low and high frequency region when used as a wall. The results obtained in this study showed that vitrified slag has the recyclable material properties and therefore, highly applicable to sound absorbing materials.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.2
• /
• pp.19-29
• /
• 1987

The absorption coefficients of various length bundles of straws simulating perforated material were studied both theoretically and experimentally. For the theoretical predictions Zwikker and Kosten's theory was modified by adapting Biot's theory based on Poiseuille flow. The experimental data were collected using an impedance tube where the attenuation along the length of the tube was considered. The theoretically predicted values agreed very well with the experimentally measured ones for frequencies lower than 700Hz with bundles shorter than 120mm in length placed against the rigid end of the impedance tube. Configurations with an air gap between the end of a bundle and the rigid end were also investigated. Absorption coefficients were higher for 150mm bundles than for those of combined/air gap configurations with a total length of 150mm. Also for the fixed bundle lengths, absorption was found to increase with increasing air gap.