• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.235-250
• /
• 2021

The overarching question of this study is how a typical rice cultivation system in Gimje, Korea was keeping up with the triple-win challenge of climate-smart agriculture (CSA). To answer this question, we have employed (1) quantitative data from direct measurement of energy, water, carbon and information flows in and out of a rice cultivation system and (2) appropriate metrics to assess production, efficiency, GHG fluxes, and resilience. The study site was one of the Korean Network of Flux measurement (KoFlux) sites (i.e., GRK) located at Gimje, Korea, managed by National Academy of Agricultural Science, Rural Development Administration. Fluxes of energy, water, carbon dioxide (CO₂) and methane (CH₄) were directly measured using eddy-covariance technique during the growing seasons of 2011, 2012 and 2014. The production indicators include gross primary productivity (GPP), grain yield, light use efficiency (LUE), water use efficiency (WUE), and carbon uptake efficiency (CUE). The GHG mitigation was assessed with indicators such as fluxes of carbon dioxide (F_CO2), methane (F_CH4), and nitrous oxide (F_N2O). Resilience was assessed in terms of self-organization (S), using information-theoretic approach. Overall, the results demonstrated that the rice cultivation system at GRK was climate-smart in 2011 in a relative sense but failed to maintain in the following years. Resilience was high and changed little for three year. However, the apparent competing goals or trade-offs between productivity and GHG mitigation were found within individual years as well as between the years, causing difficulties in achieving the triple-win scenario. The pursuit of CSA requires for stakeholders to prioritize their goals (i.e., governance) and to practice opportune interventions (i.e., management) based on the feedback from real-time assessment of the CSA indicators (i.e., monitoring) - i.e., a purpose-driven visioneering.

• Journal of dental hygiene science
• /
• v.11 no.2
• /
• pp.121-127
• /
• 2011

This study was conducted to improve patients satisfaction by comparing patients expectation prior to the implant therapy to patient satisfaction after the implant therapy. The data of 158 patients with dental implant in Seoul, Gyeonggi-Do and Cheonan city was obtained. The results are as follows : 1. 40.5% of patients placed one implant and 36.1 % of patients answered that the average cost for each implant is from 1,500,000 to 2,000,000won. 23.4% of them answered they decided to have implant because no tooth preparation is required. 2. Overall, the expectation level for implant therapy in general properties, women showed higher level of expectation than men. Especially, 'Implant has a longer life than other denture' showed significant difference between women(4.29) and men(3.87). Expectation by age, 'Implant has similar color and shape' was found the highest in age 20(4.38). Satisfaction by general properties, 'No tooth preparation required' was found the highest in age 20(4.57) and was statistically significant(p<.002). 3. Comparing patients' expectation prior to implant therapy to satisfaction afterward, 'Implant prevents jawbone resorption and keeps facial appearance' showed 3.7 of expectation but satisfaction was found increased to 3.87(p=.020). No tooth preparation required' was found 3.95 in expectation prior to implant therapy but after therapy it was found 4.23 in satisfaction (p<.001). 4. Overall satisfaction in implant therapy was found 4.25, recommendation to other patients was found 4.18 and repurchase was found 4.17.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.82-88
• /
• 2021

Sun-induced fluorescence (SIF) retrieval using remote sensing technique has been used in an effort to understand the photosynthetic efficiency and stress condition of vegetation. Although optical devices and SIF retrieval methodologies were established in order to retrieve SIF, the SIF measurements are domestically sparse. SIF data of paddy rice w as measured in Naju, South Korea from June 10, 2020 to October 5, 2020. The SIFs based red (O2A) and far-red (O2B) w ere retrieved using a spectral fitting method and an improved Fraunhofer line depth, and photosynthetically active radiation was also produced. In addition, the SIF data was filtered considering solar zenith angle, saturation conditions, the rapid and sudden change of solar irradiance, and sun glint. The provided SIF data can help to understand a SIF product and the filtering method of SIF data can contribute to producing high-quality SIF data.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.6
• /
• pp.669-674
• /
• 2012

D-Cube City is a recently completed multi purpose building consisting of four types of facilities; offices, a department store, a hotel, and congregation spaces. A community energy supply system(CES) has been installed to supply this building with electricity, steam, heat, and cold water. The BEMS, building energy management system, is currently being designed to reduce building energy consumption through the efficient operation of the various pieces of building service equipment. In this study the optimal methods for operating the CES of D-Cube City were considered. This system includes three combined heat and power systems, seven steam boilers, two hot water boilers, two absorption chillers, and four turbo chillers, and various other pieces of equipment. In result, the optimal methods of operating the CES for various energy demand levels were obtained along with the seasonal effects on the economic efficiency of the operation. The effect of the amount of energy demanded by the various facility areas on the total energy consumption was also analyzed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.23-34
• /
• 2015

Recently a new damper system with Kogome truss structure was developed and its mechanical properties were verified based on the laboratory test. This paper presents a Kagome truss damper external connection method for seismic strengthening of RC frame structural system. The Kagome external connection method, proposed in this study, consisted of building structure, Kagome damper and support system. The method is capable of reducing earthquake energy on the basis of the dynamic interaction between external support and building structures using Kagome damper. The pseudo-dynamic test, designed using a existing RC frame apartment for pilot application of LH corporation, was carried out in order to verify the seismic strengthening effects of the proposed method in terms of the maximum load carrying capacity and response ductility. Test results revealed that the proposed Kagome damper method installed in RC frame enhanced conspicuously the strength and displacement capacities, and the method can resist markedly under the large scaled earthquake intensity level.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.170-175
• /
• 2018

For the seismic performance, it is necessary to prevent the destruction of the expansion joint device due to the appropriate deformation of the expansion joint device due to the seismic force. Recently, the hinge is installed on the fingering of the expansion joint device in Korea, New products are being developed. In this paper, we have experimentally evaluated the real scale resistance of the expansion joints with rotational finger joints against load at right angle to the bridge axis. Experimental results show that the maximum horizontal displacement is about 21.1mm for conventional stretch joints and 51.00mm for seismic stretch joints. It is presumed that the existing expansion joint test specimen is resistant to the load in a direction perpendicular to the throat axis, and then the bending and shear deformation of the finger are excessively generated and the fracture phenomenon is likely to occur. On the other hand, in the case of the seismic expansion joint, the deformation of the load due to the load is absorbed by the hinge of the finger with respect to the load in the direction perpendicular to the throat, so that only horizontal deformation in the direction of load action.

• Journal of Veterinary Clinics
• /
• v.32 no.4
• /
• pp.363-365
• /
• 2015

The Asiatic black bear (Ursus thibetanus) is globally protected species and involved in a species restoration program by the Korea National Park Service. However, the bears could not be released into the wild were required regulation of population due to the limited space of breeding facility, so surgical castration was performed in two males. Bears were immobilized with a combination of 2 mg/kg tiletamine-zolazepam and $40{\mu}g/kg$ medetomidine, and general anesthesia was maintained with isoflurane via endotracheal tube intubation. Orchiectomy was carried out by the closed method using the LigaSure vessel sealing device through pre-scrotal incision. Subcutaneous tissues of the incision site were sutured by continuous pattern with absorbable suture material, and the skin incision was closed with tissue glue. The bears recovered uneventfully from general anesthesia after a duration of 58 min (bear A) and 53 min (bear B). Total surgical time was 26 min (bear A) and 24 min (bear B). No postoperative swelling or complications were observed. This is the first report that describes the use of the LigaSure for orchiectomy in the Asiatic black bear.

• Journal of Wetlands Research
• /
• v.24 no.3
• /
• pp.170-184
• /
• 2022

The Riparian Buffer Zone(RBZ) is a sustainable social-ecological system created in the middle zone between water and land. For the RBZ, close communication with the local community is important, and it is necessary to promote it as a communicative environmental planning process. In this study, for the RBZ project, three strategies are presented as a communicative act to understand and implement planning. First, government-led projects were avoided and improved to a process in which citizens and stakeholders participated together, centered on local partnership. Second, it was intended to introduce design criterias in terms of enhancing the function of ecosystem services that citizens can sympathize with, and to increase acceptance and awareness through the planning of preferred spaces and facilities. Third, after a balanced plan for habitats, water cycle-based ecological environment, ecological experience and open space, citizens felt the restoration effect and value as an ecological resources, and a system was prepared to participate in the operation and management. This study will work as a process model based on citizens's participation. In addition, it will be possible to provide lessons for the change of the policy paradigm for the RBZ and the implementation of similar projects in the future.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.281-287
• /
• 2009

An eruption failure can be observed for child and adolescent periods when the primary dentition is changed to the permanent dentition through the mixed dentition frequently. The eruption failure can lead to miss erupting times of the tooth, then it will cause a lot of problems including root resorption, esthetic problem, transposition of adjacent tooth, malocclusoin and etc. Especially, the maxillary first molar is importantly concerned with occlusion and growth and is an essential tooth for development and maintenance of occlusion. So, it is a momentous part of more proper occlusal management to find these abnormal cases at the early stage and solve the problems. The sorts of eruption failures of the maxillary first molars can be divided into delayed eruption, impaction and the primary retention and the secondary retention. When physical obstacles cause impaction, first of all they must be removed then we can treat the impaction with observation after removal, surgical exposure or orthodontic traction. If the source of impaction is an ectopic eruption, the treatment can be a brasswire, a pendulum appliance, a space maintainer or space regainer after the extraction of the second deciduous tooth and etc. These cases are made a diagnosis of eruption failures of the maxillary first molars in mixed dentition period and have good prognosises after my treatments. So I reported them.

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.195-209
• /
• 2018

In this study, the characteristics of various raw hairs used for traditional Korean brushes were examined; further, the characteristics and deterioration patterns of Korean, Chinese, and Japanese brushes were compared, with a quantitative evaluation to assess the brush performance. The tensile strength was generally found to be higher with a greater fiber thickness. Among the hairs examined, the back and flank hair of goat was more damaged than that in other parts, and the tensile strength was low. Higher elasticity of the brush made with hair of high cysteine content was measured. Owing to deterioration by use of the brushes, artificial drying brushes had a higher yellowness index and lower tensile strength than natural drying brushes. Further, it was confirmed that brushes with good absorbency exhibited good consistency, but not good elasticity. Thus, the performance of the brush can be influenced by the kind of material used and the brush usage pattern. In addition, it is possible to identify the material science characteristics of brushes which have been produced only by experience; therefore, the results of this study could provide basic data for manufacturing brushes employed in conservation treatment, in the future.