• Journal of the Korean Society of Food Culture
• /
• v.23 no.2
• /
• pp.222-227
• /
• 2008

This study examined the chemical composition of lotus root and functionally evaluated a fermented lotus root drink. Electron-donating ability using DPPH along with nitrite-scavenging ability were used to compare the antioxidative activities of unfermented and fermented lotus root drinks. The electron-donating abilities of the unfermented lotus root drink (1%) and fermented lotusroot drink (1%) were 22.55% and 23.88%, respectively. At pH 6.0, the nitrite-scavenging abilities of the unfermented lotus root drink and the fermented lotus root drink (100%) were 27.64% and 40.3%, respectively, and their scavenging ability increased in a dose-dependent manner at all pH values. In order to study the anti-obesity effects of the two drinks, male Sprague-Dawley rats were divided into four groups (A: basal diet, B: high fat diet, C: high fat diet+unfermented lotus root drink, D: high fat diet+fermented lotus root drink). Net weight gains were not significantly different among the four groups. Plasma total cholesterol concentrations significantly decreased in the groups receiving the unfermented and fermented lotus root drinks. Also, plasma total lipid and triglyceride contents were lower in the groups receiving the unfermented and fermented lotus root drinks as compared to the high fat diet group; however, the differences among the three groups were not significant.

• 한국노년학
• /
• v.29 no.1
• /
• pp.149-175
• /
• 2009

The purpose of this research is to analyze the overall problems at the moment of October 2008, and then to find the improvements of home-help services of the Long-Term Care Insurance(LTCI), which has been revealed many problems since it was released in July 2008. The research uses the literature survey which analyzes 2nd-hand materials studied by other people already, and survey research was executed from active social workers in the area of LTCI. Based on the policy analysis framework of Gilbert and Specht, all the data are analyzed in the scopes of client·benefit(service)·finance·transferring system. This research has found the problems in each scope of home-help services of the LTCI. Firstly, the client system has some problems in mismatching between registered and service clients, estimating client number, and judging service levels. Secondly, the service system reveals deficiency in professionality of social workers, service quality lowering by loose qualification criteria on workers, non-reasonable limitation of service time available, and the same fare system applied to visiting-help service in spite of different levels. Thirdly, in financing system, clients need to pay additional money to get extra services such as meal, hair cutting, bathing etc., due to government financial support stopped, some organizations have to reduce services and replace full-time workers to part-time ones, which makes the service quality worse. Lastly, in the transferring system, the management system for service quality is not well prepared. There are too much competion because of allowing too many home-help service organizations and care worker academies. The suggestions that this research has found to improve the policy are as follows. ① It is desirable to make the registered clients the service ones as many as possible in the long term perspective. ② The LTCI organization requires more workers and higher professionality. ③ Many elderly people who are not eligible now require connection system to be more served. ④ Management system and service manual for care worker are to be developed. ⑤ Laws related to the service contents and process should be modified, the proportion of client charge needs to adjust. ⑥ Home-help service organization licensed by the LTCI needs to be financially supported publicly. ⑦ Monitoring system to home-help service organization needs to be strengthened. ⑧ Evaluation tools to home-help service organization and workers is required. ⑨ Specification to open the home-help service organization needs to be more strict.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.11
• /
• pp.471-480
• /
• 2023

The Korean construction order volume in South Korea grew significantly from 91.3 trillion won in public orders in 2013 to a total of 212 trillion won in 2021, particularly in the private sector. As the size of the domestic and overseas markets grew, the scale and complexity of EPC (Engineering, Procurement, Construction) projects increased, and risk management of project management and ITB (Invitation to Bid) documents became a critical issue. The time granted to actual construction companies in the bidding process following the EPC project award is not only limited, but also extremely challenging to review all the risk terms in the ITB document due to manpower and cost issues. Previous research attempted to categorize the risk terms in EPC contract documents and detect them based on AI, but there were limitations to practical use due to problems related to data, such as the limit of labeled data utilization and class imbalance. Therefore, this study aims to develop an AI model that can categorize the contract terms based on the FIDIC Yellow 2017(Federation Internationale Des Ingenieurs-Conseils Contract terms) standard in detail, rather than defining and classifying risk terms like previous research. A multi-text classification function is necessary because the contract terms that need to be reviewed in detail may vary depending on the scale and type of the project. To enhance the performance of the multi-text classification model, we developed the ELECTRA PLM (Pre-trained Language Model) capable of efficiently learning the context of text data from the pre-training stage, and conducted a four-step experiment to validate the performance of the model. As a result, the ensemble version of the self-developed ITB-ELECTRA model and Legal-BERT achieved the best performance with a weighted average F1-Score of 76% in the classification of 57 contract terms.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.464-471
• /
• 2023

In this paper, we propose a method to reduce age distortion in facial expression image generation using StyleGAN Encoder. The facial expression image generation process first creates a face image using StyleGAN Encoder, and changes the expression by applying the learned boundary to the latent vector using SVM. However, when learning the boundary of a smiling expression, age distortion occurs due to changes in facial expression. The smile boundary created in SVM learning for smiling expressions includes wrinkles caused by changes in facial expressions as learning elements, and it is determined that age characteristics were also learned. To solve this problem, the proposed method calculates the correlation coefficient between the smile boundary and the age boundary and uses this to introduce a method of adjusting the age boundary at the smile boundary in proportion to the correlation coefficient. To confirm the effectiveness of the proposed method, the results of an experiment using the FFHQ dataset, a publicly available standard face dataset, and measuring the FID score are as follows. In the smile image, compared to the existing method, the FID score of the smile image generated by the ground truth and the proposed method was improved by about 0.46. In addition, compared to the existing method in the smile image, the FID score of the image generated by StyleGAN Encoder and the smile image generated by the proposed method improved by about 1.031. In non-smile images, compared to the existing method, the FID score of the non-smile image generated by the ground truth and the method proposed in this paper was improved by about 2.25. In addition, compared to the existing method in non-smile images, it was confirmed that the FID score of the image generated by StyleGAN Encoder and the non-smile image generated by the proposed method improved by about 1.908. Meanwhile, as a result of estimating the age of each generated facial expression image and measuring the estimated age and MSE of the image generated with StyleGAN Encoder, compared to the existing method, the proposed method has an average age of about 1.5 in smile images and about 1.63 in non-smile images. Performance was improved, proving the effectiveness of the proposed method.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.387-397
• /
• 2023

Plant height is a growth parameter that provides visible insights into the plant's growth status and has a high correlation with yield, so it is widely used in crop breeding and cultivation research. Investigation of the growth characteristics of crops such as plant height has generally been conducted directly by humans using a ruler, but with the recent development of sensing and image analysis technology, research is being attempted to digitally convert growth measurement technology to efficiently investigate crop growth. In this study, the canopy height of rice grown at various nitrogen fertilization levels was measured using a laser scanner capable of precise measurement over a wide range, and a comparative analysis was performed with the actual plant height. As a result of comparing the point cloud data collected with a laser scanner and the actual plant height, it was confirmed that the estimated plant height measured based on the average height of the top 1% points showed the highest correlation with the actual plant height (R² = 0.93, RMSE = 2.73). Based on this, a linear regression equation was derived and used to convert the canopy height measured with a laser scanner to the actual plant height. The rice growth curve drawn by combining the actual and estimated plant height collected by various nitrogen fertilization conditions and growth period shows that the laser scanner-based canopy height measurement technology can be effectively utilized for assessing the plant height and growth of rice. In the future, 3D images derived from laser scanners are expected to be applicable to crop biomass estimation, plant shape analysis, etc., and can be used as a technology for digital conversion of conventional crop growth assessment methods.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.257-267
• /
• 2023

Purpose. The purpose of the study was to fabricate a prototype robotic simulator for dental education, to test whether it could simulate mandibular movements, and to assess the possibility of the stimulator responding to stimuli during dental practice. Materials and methods. A virtual simulator model was developed based on segmentation of the hard tissues using cone-beam computed tomography (CBCT) data. The simulator frame was 3D printed using polylactic acid (PLA) material, and dentiforms and silicone face skin were also inserted. Servo actuators were used to control the movements of the simulator, and the simulator's response to dental stimuli was created by pressure and water level sensors. A water level test was performed to determine the specific threshold of the water level sensor. The mandibular movements and mandibular range of motion of the simulator were tested through computer simulation and the actual model. Results. The prototype robotic simulator consisted of an operational unit, an upper body with an electric device, a head with a temporomandibular joint (TMJ) and dentiforms. The TMJ of the simulator was capable of driving two degrees of freedom, implementing rotational and translational movements. In the water level test, the specific threshold of the water level sensor was 10.35 ml. The mandibular range of motion of the simulator was 50 mm in both computer simulation and the actual model. Conclusion. Although further advancements are still required to improve its efficiency and stability, the upper-body prototype simulator has the potential to be useful in dental practice education.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_3
• /
• pp.1031-1042
• /
• 2023

In this study, a deep learning model was developed to predict the yield of cabbage and radish, one of the five major supply and demand management vegetables, using satellite images of Landsat 8. To predict the yield of cabbage and radish in Gangwon-do from 2015 to 2020, satellite images from June to September, the growing period of cabbage and radish, were used. Normalized difference vegetation index, enhanced vegetation index, lead area index, and land surface temperature were employed in this study as input data for the yield model. Crop yields can be effectively predicted using satellite images because satellites collect continuous spatiotemporal data on the global environment. Based on the model developed previous study, a model designed for input data was proposed in this study. Using time series satellite images, convolutional neural network, a deep learning model, was used to predict crop yield. Landsat 8 provides images every 16 days, but it is difficult to acquire images especially in summer due to the influence of weather such as clouds. As a result, yield prediction was conducted by splitting June to July into one part and August to September into two. Yield prediction was performed using a machine learning approach and reference models , and modeling performance was compared. The model's performance and early predictability were assessed using year-by-year cross-validation and early prediction. The findings of this study could be applied as basic studies to predict the yield of field crops in Korea.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1173-1183
• /
• 2023

Over the past 20 years, Korea's overall import and export cargo volume has increased at an average annual rate of approximately 5.3%. About 99% of the cargo is still being transported by sea. Due to recent increases in maritime cargo volume, congestion in maritime logistics has become challenging due to factors such as the COVID-19 pandemic and conflicts. Continuous monitoring of ports has become crucial. Various ground observation systems and Automatic Identification System (AIS) data have been utilized for monitoring ports and conducting numerous preliminary studies for the efficient operation of container terminals and cargo volume prediction. However, small and developing countries' ports face difficulties in monitoring due to environmental issues and aging infrastructure compared to large ports. Recently, with the increasing utility of artificial satellites, preliminary studies have been conducted using satellite imagery for continuous maritime cargo data collection and establishing ocean monitoring systems in vast and hard-to-reach areas. This study aims to visually detect ships docked at berths in the Busan New Port using high-resolution satellite imagery and quantitatively evaluate berth utilization rates. By utilizing high-resolution satellite imagery from Compact Advanced Satellite 500-1 (CAS500-1), Korea Multi-Purpose satellite-3 (KOMPSAT-3), PlanetScope, and Sentinel-2A, ships docked within the port berths were visually detected. The berth utilization rate was calculated using the total number of ships that could be docked at the berths. The results showed variations in berth utilization rates on June 2, 2022, with values of 0.67, 0.7, and 0.59, indicating fluctuations based on the time of satellite image capture. On June 3, 2022, the value remained at 0.7, signifying a consistent berth utilization rate despite changes in ship types. A higher berth utilization rate indicates active operations at the berth. This information can assist in basic planning for new ship operation schedules, as congested berths can lead to longer waiting times for ships in anchorages, potentially resulting in increased freight rates. The duration of operations at berths can vary from several hours to several days. The results of calculating changes in ships at berths based on differences in satellite image capture times, even with a time difference of 4 minutes and 49 seconds, demonstrated variations in ship presence. With short observation intervals and the utilization of high-resolution satellite imagery, continuous monitoring within ports can be achieved. Additionally, utilizing satellite imagery to monitor changes in ships at berths in minute increments could prove useful for small and developing country ports where harbor management is not well-established, offering valuable insights and solutions.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1321-1330
• /
• 2023

Normalized Difference Vegetation Index (NDVI) is the most widely used remote sensing data in the agricultural field and is currently provided by most optical satellites. In particular, as high-resolution optical satellite images become available, the selection of optimal optical satellite images according to agricultural applications has become a very important issue. In this study, we aim to define the most optimal optical satellite image when monitoring NDVI in rice fields in Korea and derive the resolution-related requirements necessary for this. For this purpose, we compared and analyzed the spatial distribution and time series patterns of the Dangjin rice paddy in Korea from 2019 to 2022 using NDVI images from MOD13, Landsat-8, Sentinel-2A/B, and PlanetScope satellites, which are widely used around the world. Each data is provided with a spatial resolution of 3 m to 250 m and various periods, and the area of the spectral band used to calculate NDVI also has slight differences. As a result of the analysis, Landsat-8 showed the lowest NDVI value and had very low spatial variation. In comparison, the MOD13 NDVI image showed similar spatial distribution and time series patterns as the PlanetScope data but was affected by the area surrounding the rice field due to low spatial resolution. Sentinel-2A/B showed relatively low NDVI values due to the wide near-infrared band area, and this feature was especially noticeable in the early stages of growth. PlanetScope's NDVI provides detailed spatial variation and stable time series patterns, but considering its high purchase price, it is considered to be more useful in small field areas than in spatially uniform rice paddy. Accordingly, for rice field areas, 250 m MOD13 NDVI or 10 m Sentinel-2A/B are considered to be the most efficient, but high-resolution satellite images can be used to estimate detailed physical quantities of individual crops.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.531-538
• /
• 2023

Recently, many university classes have been changing from instructor-centered classes to learner-centered classes, and universities are trying to establish a new direction for university education, especially to foster talented people suitable for the Fourth Industrial Revolution. To this end, universities are presenting various competencies necessary for students and focusing on research on efficient education plans for each competency. Among them, creativity is considered the most important competency that students should obtain in universities. Developing a creative problem-solving-based subject where various majors gather to produce results while conducting creative team activities away from desk classes is considered a meaningful subject to cultivate capacities suitable for the requirements of the times. Therefore, this study purpose to develop creative problem-solving-based subjects and analyze the results of class progress. This creative problem-solving-based class is an Action Learning class for step-by-step idea development, which starts with a theoretical lecture for creative idea development and then consists of five stages of Action Learning. The tasks of action learning used in this class consisted of ceramic expression to increase the intimacy of the formed group and the group's collective expression, ideas in life to combine and compress individual ideas into one, environmental improvement programs around schools, and finally UCC on various topics. In the theoretical lecture conducted throughout the class, a class was conducted on Scientific Thinking for creative problem solving, and then a group-type action learning class was conducted sequentially. This Action Learnin process gradually increased the difficulty level and led to in-depth learning by increasing the level of difficulty step by step.