• Korean Journal of Environmental Biology
• /
• v.20 no.4
• /
• pp.366-377
• /
• 2002

This study investigated the ecological environment of Dongguneung, which royal tombs of the Joseon Dynasty aye in. The aim of this study is to do an effective preservation, management and restoration of the royal tomb and garden of the Joseon Dynasty distributed in Seoul and Kyunggi Province through using the data of Dongguneung. In general, Dongguneung contains the predominant Oak class such as Quercus serrata-Quercus mongolica community, while a flatland surrounding its control office, which is often flooded with the rainy season in summer, is mainly Alnus japonica community, Pinus densiflora community ranges around the royal tomb. The subcommunity of Quercus serrata -Quereus mongolica community is distributed into Robinia pseudo-acacia, Pinus rigida, Pinus koraiensis, Carpinus laxiflora and typical subcommunity and so on. In particular, Robinia pseudo -acacia, Pinus rigida and Pinus koraiensis subcommunity, and Alnus japonica community were forested. The soil class of Dongguneung was mainly a sandy loam and its pH was an average of 4.67 (from 4.36 to 5.68). The content of heavy metals including Cu, Pb and Zn etc. in the soil was about twice as much as the natural content in the forest soil. The content of organism and total nitrogen in the topsoil layer was the average of 4.87% and 0.21% respectively, slightly higher than those (organism； 4.55%, total nitrogen； 0.20%) of the forest soil generated from granite bedrock. Cation exchange capacity as the indicator of soil fertility was 15.0 cmol $kg^{-1}$, higher than that in the granite forest soil. However among base exchangeable cations, contents of $Ca^{2+}$ (2.07 cmol $kg^{-1}$), $Mg^{2+}$ (0.40 cmol $kg^{-1}$) and K+ (0.25 cmol $kg^{-1}$) were slightly lower than that. The above results could reflect the need of soil fertilization and liming for the improvement of nutritional status and buffer process.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.49-59
• /
• 1984

Optimizing investigation of characteristics of underwater welding by a gravity type arc welding process was experimentally carried out by using six types of domestic coated welding electrodes for welding of domestic marine structural steel plates (KR Grade A-1, SWS41A, SWS41B,) in order to develop the underwater welding techniques in practical use. Main results obtained are summarized as follows: 1. The absorption speed of the coating of domestic coated lime titania type welding-electrode became constant at about 60 minutes in water and it was about 0.18%/min during initial 8 minutes of absorption time. 2. Thus, the immediate welding electrode could be used in underwater welding for such a short time in comparison with the joint strength of in-atmosphere-and on-water-welding by dry-, wet-or immediate-welding-electrode. 3. By bead appearance and X-ray inspection, ilmenite, limetitania and high titanium oxide types of electrodes were found better for underwater-welding of 10 mm KR Grade A-1 steel plates, while proper welding angle, current and electrode diameter were 6$0^{\circ}C$, above 160A and 4mm respectively under 28cm/min of welding speed. 4. The weld metal tensile strength or proof stress of underwater-welded-joints has a quadratic relationship with the heat input, and the optimal heat input zone is about 13 to 15KJ/cm for 10mm SWS41A steel plates, resulting from consideration upon both joint efficiency of above-100% and recovery of impact strength and strain. Meanwhile, the optimal heat input zone resulting from tension-tension fatigue limit above the base metal's of SWS41A plates is 16 to 19KJ/cm. Reliability of all the empirical equations reveals 95% confidence level. 6. The microstructure of the underwater welds of SES41A welded in such a zone has no weld defects such as hydrogen brittleness with supreme high hardness, since the HAZ-bond boundary area adjacent to both surface and base metal has only Hv400 max with the microstructure of fine martensite, bainite, pearlite and small amount of ferrite.

• Journal of Korean Home Economics Education Association
• /
• v.25 no.4
• /
• pp.29-46
• /
• 2013

The concepts of core competencies and achievement standards were newly introduced within national curriculum documents since the 2009 Revised National Curriculum. The purpose of this introduction was to develop a curriculum that reflects unique characteristics of each subject and for the effectiveness of student evaluation. The purpose of this study was to suggest a direction for the future national curriculum and achievement standards development through comparing the national curriculum and standards between South Korea and the U.S. In particular, this study focused on two aspects: 1) the hierarchical relationships and the structural system of achievement standards in the curricula of two countries, and 2) the details of differences in two countries' achievement standards of a specific content area, 'family'. The results are as follows: the Korean national curriculum includes core competencies was included in the objective statement, and standards were provided as a lower-level system, while the U.S. national standards was composed of hierarchical system of comprehensive standards(higher-level), contents standards(middle-level), and competencies(lower-level). This may be attributable to the difference in the definition of competencies. The analysis results of detailed contents of the curriculum was related to the terminologies used in curriculum documents of the two countries. For example, work and family balance was frequently mentioned in Korean document, while the U.S. national curriculum just displayed multiple roles of individuals rather than using the term explicitly. Also, terms such as happiness and welfare were frequently mentioned in Korean curriculum, while 'well-being' was more frequently used in the U.S. curriculum. These differences in usage of terms reflects the differences in cultural values and perspectives of the two countries.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.262-269
• /
• 2002

The purpose of this study was to compare the effect of distance of light tip to resin surfaces and exposure time on the polymerization of surface and 2 mm subsurface of composite resins cured with two light sources; conventional halogen light (XL 3000, 3M, U.S.A.) and plasma arc light (Flipo, LOKKI, France) and compare the uniformity of polymerization from the center to the periphery of resin surfaces according to polymerization diameter cure with two light sources. From the experiment, the following results were obtained. 1. Difference of relative light intensity decrease in plasma arc light smaller than that of conventional halogen light(p<0.05). 2. In all groups, microhardness of top surfaces was decreased when distance of the light tip to resin surfaces is more than 2mm and increased according to increase of exposure time(p<0.05). 3. Difference of microhardness of the 2mm subsurface was rapidly decreased when distance of light tip to resin surfaces is more than 4mm(except, plasma arc light exposure time of 3 seconds). and the distance of light tip to resin surfaces and exposure time more affected 2mm subsurface rather than top surface(p<0.05). 4. Although exposure time was increased, difference of microhardness of the 2mm subsurface with the distance of light tip to resin surfaces was relatively high in groups between below 4mm and 6 mm(p<0.05). 5. Plasma arc light exposure time of 6 to 9 seconds produced microhardness values and microhardness change according to various distance similar to those produced with 40 to 80 second exposure to a conventional halogen light(p>0.05). 6. In all groups, microhardness was decreased gradually from the center to the periphery of resin surfaces(p<0.05).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.12C
• /
• pp.1288-1298
• /
• 2002

To implement elliptic curve cryptosystem in GF(2$\^$m/) at high speed, a fast divider is required. Although bit-parallel architecture is well suited for high speed division operations, elliptic curve cryptosystem requires large m(at least 163) to support a sufficient security. In other words, since the bit-parallel architecture has an area complexity of 0(m$\^$m/), it is not suited for this application. In this paper, we propose a new serial-in serial-out systolic array for computing division operations in GF(2$\^$m/) using the standard basis representation. Based on a modified version of tile binary extended greatest common divisor algorithm, we obtain a new data dependence graph and design an efficient bit-serial systolic divider. The proposed divider has 0(m) time complexity and 0(m) area complexity. If input data come in continuously, the proposed divider can produce division results at a rate of one per m clock cycles, after an initial delay of 5m-2 cycles. Analysis shows that the proposed divider provides a significant reduction in both chip area and computational delay time compared to previously proposed systolic dividers with the same I/O format. Since the proposed divider can perform division operations at high speed with the reduced chip area, it is well suited for division circuit of elliptic curve cryptosystem. Furthermore, since the proposed architecture does not restrict the choice of irreducible polynomial, and has a unidirectional data flow and regularity, it provides a high flexibility and scalability with respect to the field size m.

• Journal of Veterinary Clinics
• /
• v.21 no.4
• /
• pp.329-335
• /
• 2004

Dog spermatozoa were recovered from the caudae epididymides of 23 domestic dogs which were 11 pure breed and 12 mix-breed dogs ranging in age from 0.6 to 3 years. The experimental designs were as follows: 1) the effect of chilling to 0. 10 or 37$^{\circ}C$. 2) the kinetics of chilling injury at 0 or 4$^{\circ}C$, and 3) the effect of sugars at $0^{\circ}C$. Viable spermatozoa were recovered by percoll gradient separation and adjusted to 5${\times}$10$^{7}$ spermatozoa/ml. In experiment 1, spermatozoa were diluted with 0.33 M glucose supplemented with 3% BSA (G-BSA) at 1:2 dilution. Spermatozoa were loaded into straws and exposed at 0, 10 or 37$^{\circ}C$ for 30 min. In experiment 2, spermatozoa were prepared as the experiment 1 and exposed for 0.5, 5, 15, or 30 min at 0 or 4$^{\circ}C$. In experiment 3, spermatozoa were diluted with different sugars (0.33 M galactose, glucose, fructose, mannitol, lactose, sucrose, raffinose) and cooled to $0^{\circ}C$ for 30 min. Sperm membrane integrity, motility and acrosome integrity were assayed after rewarming at 37$^{\circ}C$ for 5 min. Sperm motility and membrane integrity abruptly decreased with decreasing temperature but acrosome integrity gradually decreased (P<0.05). Sperm motility was more sensitive to cold shock than membrane integrity and acrosome integrity. Spermatozoa cooled to $0^{\circ}C$ were more damaged than those at 4$^{\circ}C$. Sperm motility was not different among exposed times at both. 0 and 4$^{\circ}C$. However, membrane integrity of spermatozoa exposed for 30 min at both 0 and 4$^{\circ}C$ was significantly lower (P<0.05). Spermatozoa diluted in 0.33 M fructose or galactose showed lower motility and higher morphological abnormality with coiled tail at $0^{\circ}C$. These sperm characteristics were strongly related. These results indicate that dog epididymal spermatozoa are relatively sensitive to rapid cooling and higher morphological abnormality at $0^{\circ}C$ was shown in spermatozoa diluted in fructose and galactose.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1254-1268
• /
• 2009

In 1998, because of the economic crisis called IMF Crisis in Korea, Kyungbu high speed railway project could run by modifying the original plan to open it as a 1st phase only by utilizing the existing railway lines from Seoul to Siheung and the other one from Daegu to Pusan. The modified plan includes that the line from Daegu to Pusan will be constructed as a second phase in next time. Starting railway operation with the changed plan, the combined application operation of high speed rail, passenger rail and freight rail was caused partly from Seoul to Siheung to run into capital area. As a result, the opinion for additional railway line construction is insisted continuously because the operation volume of passenger rail was forced to be reduced, the service quality of it was decreased and it became difficult to add new high speed services. Moreover, with regard to Honam high speed rail, the new construction plan of station in Kangnam metro area as a basement station for starting from Suseo was changed to the plan of turning out at Osong because of the economic effectiveness and this kept resident people in Kangnam metro area and southern Kyungki area unable to get the opportunity of high speed rail service benefit. After beginning of Kyungbu high speed railway operation, national transportation system developments are focused on high speed rail, and when the second phase construction of Kyungbu high speed rail, beginning operation of Kyungjeon line, Jeolla line double track construction, Honam high speed rail in 2014, is completed, the demand for high speed rail will be increased and it is unavoidable to make Kwangmyung station as a basement station and to reduce the number of passenger rail operation. At this moment, it is valuable to consider adding the railway line capacity in capital area to improve the transferring service for citizen who live in area without Kyungbu high speed rail station and to expand the service area from Kangbuk to Kangnam and southern Kyungki area. Accordingly, in this paper, the effective rail operation method, facility plan and the other issue to be reviewed for increasing capital high speed railway lines will be mentioned.

• Food Science and Preservation
• /
• v.21 no.1
• /
• pp.62-68
• /
• 2014

This study was performed in order to investigate the functional components of 5 kinds of marine algae. We have collected 5 samples of marine algae, such as the sea mustard (Undaria pinnatifida), sea tangle (Laminaria iaponice), sea weed fusiforme (Hizikia fusiforme), green laver (Entetomotpha), laver (Phophyratenera), which have been harvested in Jeollanam-do. In order to examine the functional effects, 5 kinds of marine algae were extracted with hot water ($80^{\circ}C$, 4 hr), ethanol and methanol (R.T., 4 hr), and subcritical water extract (SWE, 3 MPa, $90^{\circ}C$, $150^{\circ}C$, $210^{\circ}C$). A higher yield of extract was obtained through SWE method (3 MPa, $210^{\circ}C$) in all of the samples obtained. The highest total sugar content was 427.4 mg/g in green laver extracted with SWE (3 MPa, $210^{\circ}C$). The content of the SWE total phenolic compounds was higher than that of the water and solvent (methanol, ethanol) extracts. The anti-oxidative activities of the extracts from 5 kinds of marine algae were examined through the DPPH radical scavenging activity test. The SWE (3 MPa, $150^{\circ}C$ and $210^{\circ}C$) of the marine algae was the highest among all of the extracts. As per the results, the SWE of the marine algae contained more functional components and it had a higher antioxidant activity than those of the other extracts. The $IC_{50}$ value of tyrosinase in seaweed fusiforme and laver were higher than those of the other samples. These results strongly support the possible use of marine algae as functional materials.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.230-236
• /
• 2017

This study was carried out to investigate the effects of ultrasonic thawing on physicochemical characteristics of frozen pork sirloin. To determine the velocity of an ultrasonic thawing machine, $-80^{\circ}C$ frozen pork sirloins were thawed using 132, 580, and 1,000 kHz ultrasonic thawing machines, and the physicochemical properties of pork sirloin thawed with $15^{\circ}C$ tap water and those using the ultrasonic thawing machines were compared. As a result, thawing speed by ultrasonic thawing was three times faster than that of tap water, but drip weight loss rate is increased by about 5% during ultrasonic thawing compared to that during thawing in tap water. However, biochemical properties, such as pH, volatile basic nitrogen, thiobarbituric acid, and total aerobic bacteria, were not improved by ultrasonic thawing. Hunter values, such as total color change and redness, improved slightly after 580 kHz ultrasonic thawing. The hardness and chewiness of the pork sirloin decreased significantly after 580 kHz ultrasonic thawing; however, springiness was not changed. These results indicate that ultrasonic thawing is faster than thawing in tap water, but the physicochemical characteristics of frozen pork sirloin was not significantly improve by ultrasonic sound.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.6
• /
• pp.987-995
• /
• 2009

The effects of Kwamaegi on serum lipid profiles and ROS(reactive oxygen spices) generating and scavenging enzyme activities were investigated in rats. The three experimental groups were divided as follows: normal control diet group (NC), 5% naturally prepared and freeze-dried Kwamaegi supplemented diet group (NPK) and 5% chitosan-ascorbate treated and artificially dried (CWDD: Chilly Wind & Dehumidification Drier) Kwamaegi supplemented diets group (CAK). There were no significant differences in weight gain, feed intake, feed efficiency ratio or organs weights per body weight including liver, kidney, heart and spleen among the group. In addition, there were no significant differences in serum triglyceride and total cholesterol contents. The HDL-cholesterol contents of the NC, CAK and NPK groups were 62.00, 36.48 and 78.44 mg/dL while LDL-cholesterol contents were 62.00, 36.48 and 78.44 mg/dL, respectively, which were significantly different. The atherogenic indeces in the experimental groups were 0.62, 1.20 and 0.13, respectively. There were no significant differences in total XOD (xanthine oxidoreductase) activities; however XOD type O activity was higher in the NPK group than un the NC group and in the CAK group XOD type O activity was 21~45% lower compared to NC and NPK groups. SOD (superoxide dismutase) activity was significantly higher in the CAK group than in the NC and NPK groups, while there were no significantly differences in GST (glutathione S-transferrase) activity among the groups. Furthermore, serum ALT activity was higher in the NPK group versus the NC and CAK groups. GSH (glutathione) content was higher and LPO (lipid peroxide) content lower in the CAK group compared to the NC and NPK groups. Forem the above results, we suggest that CA treated and artificially dried Kwamaegi is not only a hygienic product but also has lowering effects on LDL-cholesterol and the atherogenic index together with the lowering of ROS-generating and increasing of ROS-scavenging enzyme activities compared to other natural products.