• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.2
• /
• pp.70-80
• /
• 2000

Princeton Ocean Model (POM) is modified to construct a three-dimensional, semi-implicit hydro¬dynamic model with a wetting-and-drying scheme. The model employs semi-implicit treatment of the barotropic pressure gradient terms and the vertical mixing terms in the momentum equations, and the velocity divergence term in the vertically-integrated continuity equation. Such treatment removes the external mode and thus the mode splitting scheme in POM, allowing the semi-implicit model to use a larger time step. Applied to hypothetical systems, both the semi-implicit model and POM give nearly the same results. The semi-implicit model, however, runs approximately 4.4 times faster than POM showing its improved computational efficiency. Applied to a hypothetical system with intertidal flats, POM employing the mode splitting scheme produces noises at the intertidal flats, that propagate into the main channel resulting in unstable current velocities. Despite its larger time step, the semi-implicit model gives stable current velocities both at the intertidal flats and main channel. The semi-implicit model when applied to Kyeonggi Bay gives a good reproduction of the observed tides and tidal currents throughout the modeling domain, demonstrating its prototype applicability.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.1
• /
• pp.45-56
• /
• 2007

Direct estimation of the pollutant load(PL) should be carried out by the data filling in the missing intervals using an appropriate method because it is impossible in which the flow discharge(water quantity) or water quality(WQ) time-series data set have the missing intervals. In this study, the several methods estimating the water quality in the missing periods are suggested and the WQ and pollutants load change patterns are compared and evaluated based on the reproducible degree of the available data change patterns. The most appropriate method is finally suggested and the contribution factor deciding the influence degree and the PL characteristics of the river estuary is also suggested. Based on the PL estimation results using the several methods, the interpolation method considering the fluctuation of the available WQ data is shown to be most efficient. The PL patterns of the Han river estuary is classified as the discharge-dominated type. The data filling process is inevitable and the WQ estimation using the efficient and effective method should be carried out in order to estimate reasonable PL.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.3
• /
• pp.226-235
• /
• 2011

Field measurements of the winds and waves were carried out for one year at multiple locations inside and outside of the Pohang New Harbor in order to clarify the reason of downtimes frequently occurring at most of the harbor quays and to establish an efficient countermeasure. In addition, the downtime records of the quays and precipitation data provided by Korea Meteorological Agency were acquired for mutual comparison and comprehensive analysis of the cause of downtimes. Except the influence of precipitation, it was found that the downtimes occurred when the height of waves entering into the harbor incurred by either one of swell, wind seas, or mixture of both, exceeded a threshold. The seiche whose period ranges from 5 to 80 minutes, which was suspected as a possible cause of the downtimes, is shown to have no direct relation with the downtimes. Meanwhile, the height of far-infra-gravity waves whose period ranges between 0.5 and 3 minutes, propagating to the harbor mouth forced by short period waves, showed almost proportional relationship with the height of short period waves. Based on the result of this study, it is concluded that the downtime problems of Pohang New Harbor can be greatly improved by effectively preventing the entrance of short period waves such as swell or wind seas.

• Proceedings of the KSEEG Conference
• /
• 2002.10a
• /
• pp.153-169
• /
• 2002

국내 대리석류 석재자원은 지질시대 및 지구조별로 선캠브리아기의 경기육괴와 영남육괴, 시대미상의 옥천대 남서부, 캠브리아-오오도비스기의 옥천대 북동부, 그리고 일부 기타시대의 옥천대 북동부 등으로 분류될 수 있다. 전자는 변성퇴적암류내에 협재된 결정질 석회암, 화강암질 편마암내 포획된 결정질 석회암 등s으로 경기육괴의 포천, 김포, 온수리, 목계와 신림도폭 그리고 영남육괴의 춘양, 현동, 울진, 중평동, 장기리와 장계도폭 등이 해당된다. 시대미상암류는 옥천대 남서부로서 목계, 충주, 괴산, 강경, 남원과 송정도폭, 그리고 캠브리아기는 풍촌석회암으로 임계, 호명, 서벽리도폭 등기 해당된다. 오오도비스기는 정선석회암이 분포하는 석병산, 평창, 정선과 임계도폭, 화천리층이 분포하는 문경도폭, 그리고 황강리도폭 등디 해당한다 기타시대는 시대미상의 각력질 석회암과 상부석탄기의 홍점층군내 협재하는 결정질 석회암으로, 이들은 각각 정선도폭과 석병산도폭에 위치한다. 선캠브리아기, 시대미상, 캠브리아기 및 오오도비스기 대리석류의 물성 중에서 흡수율과 공극율은 선캠브리아기, 오오도비스기, 시대미상과 캠브리아기의 순으로 점차 감소한다. 이들의 공극율은 비중에 대하여 대체로 불규칙하며, 흡수율은 공극율에 대하여 거의가 뚜렷한 정의 상관관계를 이룬다. 압축강도는 공극율에 대하여 다소 불규칙한, 그리고 인장강도에 대하여 정의 상관관계를 이룬다. 그리고 마모경도는 압축강도와 인장강도에 대하여 대체로 뚜렷한 정의 경향을 각각 보인다. 이들 대리석류는 선캠브리아기 중경암-경암, 시대미상 중경암-경암, 캠브리아기 거의가 중경암-경암, 그리고 오오도비스기는 경암에 각각 해당한다.하고 구현 단계의 문제점들과 해결책을 기술한다. 다 솔레노이드방식 감압건조장치로 건조한 표고버섯으로 품위에 대한 유의성 검증결과, 표고버섯의 경우 온도별로는 색택과 복원률, 건조실 내부 압력별로는 수축률, 복원률에서 유의차가 있는 것으로 나타났다. 라. 본 연구에서 구명된 감압건조특성을 기초로 하여 배치식 감압건조기를 설계 제작에 활용하고자 한다.ational banks. Several financial interchange standards which are involved in B2B business of e-procurement, e-placement, e-payment are also investigated.. monocytogenes, E. coli 및 S. enteritidis에 대한 키토산의 최소저해농도는 각각 0.1461 mg/mL, 0.2419 mg/mL, 0.0980 mg/mL 및 0.0490 mg/mL로 측정되었다. 또한 2%(v/v) 초산 자체의 최소저해농도를 측정한 결과, B. cereus, L. mosocytogenes, E. eoli에 대해서는 control과 비교시 유의적인 항균효과는 나타나지 않았다. 반면에 S. enteritidis의 경우는 배양시간 4시간까지는 항균활성을 나타내었지만, 8시간 이후부터는 S. enteritidis의 성장이 control 보다 높아져 배양시간 20시간에서는 control 보다 약 2배 이상 균주의 성장을 촉진시켰다.차에 따른 개별화 학습을 가능하게 할 뿐만 아니라 능동적인 참여를 유도하여 학습효율을 높일 수 있을 것으로 기대된다.향은 패션마케팅의 정의와 적용범위를 축소시킬 수 있는 위험을 내재한

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.504-514
• /
• 2013

Purpose: This study was to identify the educational effects of self directed learning applying basic nursing practice contents of e-learning on nursing students' knowledge, self-confidence, and learning satisfaction. Method: This study applied a quasi-experimental pre-test and post-test control group design with 63 freshman nursing students (31 experimental group, 32 control group) of G. university in Incheon, Korea as subjects. The e-learning content was about the application of topical medications, central line care, and blood transfusion. All were available at the web site in school. Self-directed e-learning was more than 120 min.(3 times a week, 2 weeks)during Sep-Nov in 2011. In both groups, there were no significant difference in general characteristics, self-directed learning readiness, knowledge, and self-confidence for the pre-homogeneity. Results: The experimental group showed a higher level of improvement in knowledge and learning satisfaction but not significantly. However, the self-confidence was significantly improved in the experimental group. Conclusion: When self-directed learning using e-learning contents added to the conventional practical class, it may be beneficial for the nursing students to learn skills effectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.991-1000
• /
• 2000

Methanotrophic consortium utilizing methane as the primary carbon source and secreting soluble methane monooxygenase (sMMO) was immobilized on celite R-635 to continuously treat a wastewater containing trichloroethylene (TCE). With influent 2 ppm of TCE. 80.4 and 84.5% of TCE was degraded in 6 and 20 hour of hydraulic retention time (HRT). respectively. and the removal efficiency of TCE was increased with an increase in HRT in methanotrophic consortium biofilm reactor (MCBR). With influent 5 ppm of TCE and 10 hour of HRT. average efficiency of TCE removal was decreased in initial stage. but gradually increased to 81%. TCE was degraded to 88.5 and 96.5% with 10 and 15 hour of HRT. respectively. when methane was supplied alternately with continuous oxygen supply at influent 5 ppm of TCE. The efficiency of TCE degradation was decreased probably because oxidation reaction of methane was proceeded slowly on MMO. when high concentration of methane was supplied with depletion of oxygen. As results of the pilot-scale study. biodegradation of TCE by MCBR system might be feasible at full-scale operation.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1027-1035
• /
• 2000

This study was carried out to investigate the treatability of landfill leachate having high concentration of ammonium nitrogen with/without the circulation of media in pilot-scale($48m^3basis$) process. Total nitrogen removal efficiency was relatively increased in the media added process (influent ; $1.230{\sim}2,000mg{\cdot}l^{-1}$, effluent ; $120{\sim}250mg{\cdot}l^{-1}$) compared with the control process. The difference of nitrogen removal efficiency between these processes may be due to that stable growth of nitrifiers attached to the media could be achieved 99.3% of ammonium-nitrogen removal efficiency(without ; 98.2%) and 88.5% of total nitrogen removal efficiency(without ; 85.8%) were shown in media added process, respectively. Also, optimum BOD/ $NH_4{^+}$-N ratio was relatively decreased in the media process compared with the control process. Sludge settleability, on the other hand. was shown better in media added process than in control process. This outstanding sludge settleability in the media added process indicates the compatibility of media(zeolite) to the microorganism and the possibility of using media of biofilm process.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.3
• /
• pp.155-161
• /
• 2012

A simple in-situ methane enrichment system in mesophilic anaerobic digestion was developed to take advantage of the differing solubilities of $CO_2$ and methane. The methane enhancement systems consisted of low solids plug-flow maize digester coupled with a leachate recycle loop to an external $CO_2$ stripper. The effects of leachate recycle rate (LRR) and reactor alkalinity on the resulting offgas $CH_4$ contents, biogas productivity and TVS removal efficiency were quantitively evaluated. The results showed that offgas $CH_4$ contents of over 94% was achieved at 3 volume of leachate recycle per volume of reactor per day (3 v/v-d) and at the reactor alkalinity of 4 g/L as $CaCO_3$, as the optimum operating conditions. The TVS removal efficiency of the methane enhancement system was 79% which corresponds to 94% of the control reactor and the methane productivity appeared to be 0.71 v/v-d. Offgas methane contents correlated well with LRR. However excessively high LRR led to the decrease in TVS removal efficiency.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.834-846
• /
• 2011

The objective of this study is to development of IDFIS system, that are consisted of hydrocyclone, rapid flocculation and inclined settler with chitosan coagulant. As the results of Jar test, a chitosan optimum dosage of 40 mg/L for river sediment, and 5 mg/L for tunnelling wastewater sediment, which these conditions leaves of residual turbidity of less than 5 NTU. Because of the effectiveness of chitosan in removing turbidity was independent on pH, the operation of IDFIS system would be simple. The synthesized turbidity was made with clay particles, river sediment, river suspended sediment, and tunnelling wastewater sediment. Results indicate that the mean overall removal efficiency of turbidity, SS, COD and TP were 98%, 99%, 85% and 95%, respectively. Chitosan is very efficient in removing turbidity in the entire turbidity range examined. IDFIS system would have possibility with compact design, because of the increase of floc size favours the floc settling speed and reduces the settling time.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.957-964
• /
• 2010

The deactivated catalyzed diesel particulate filter-trap (DPF) was remanufactured by ultrasonic wave treatment with various prepared solutions, followed by active component re-impregnation, and the emission control performance and surface properties of remanufactured DPF were studied at various remanufacturing conditions. The proper ultrasonic wave cleaning time at various prepared solutions and optimal re-impregnation amounts of active component for the best emission control performance of DPF were investigated and its performance tests were also carried out with various temperatures for the conversions of CO, THC (total hydrocarbon) and PM (particulate matter) by catalytic reaction test unit using bypass gas from the diesel engine dynamo system. It was found that the emission control performance of DPF remanufactured with the high-temperature air washing, ultrasonic wave cleaning at acid/base solutions and active component re-impregnation method was recovered to 95% level of its activity compared to that of the fresh DPF, which was caused by removing the deactivating materials from the surface of the DPF, through the analyses of performance test and their surface characterization by Optical microscope, EDX, ICP, TGA, and porosimeter.